1970 Jeep Accel Parts


Showing 1 - 5 of 5 products
Image
SKU
Product
Rating
Price

Accel
  • Extreme 9000 Ceramic Boot Spark Plug Wire Set
  • w/Terminals For Male And Female Tower Caps; 8mm; 90 Deg. Boots; 500 Ohms Per Foot; Black
  • Extreme 9000 Ceramic Boot Spark Plug Wire Set; Universal w/Terminals For Male And Female Tower Caps; 8mm; 90 Deg. Boots; 500 Ohms Per Foot; Black;
  • Extreme 9000 Ceramic Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8mm
    • Wire Series: Extreme 9000 Ceramic
    • WARNING CA Proposition 65: Yes
    • Core Type: Ferro-spiral
    • Boot Type: 90 Degree
    • Wire Temperature Rating: 600 Degree
    • Boot Material: Ceramic
    • Engine:
      • Universal 4 Cylinder
      • Universal 6 Cylinder
      • Universal 8 Cylinder
    • Resistance: 500 Ohms Per Ft.
    • Boot Angle: 90 Degree
  • Features:
    • 500 Ohms/ft. Ferro Spiral Core
    • Highest RFI/EMI Suppression Level
    • 8mm Double Silicone Construction Black Wire Rated To 600° F
    • Ceramic Boots Withstand Up To 2000° F
    • Superb Energy Delivery WhileProviding Highest RFI/EMI Suppression
    • Available With Either Straight/90 Degree/135 Degree Boots
    • Pre And Post HEI Vehicles
    • Stainless Steel Plug Terminals
  • ACCEL now offers the cure for burnt spark plug wire boots with Extreme 9000 Ceramic Wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. The ceramic boots will withstand up to 2,000 degrees F. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots. The wire uses a 500 Ohms/ft Ferro-Spiral core developed for performance use. It provides excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. The Extreme 9000 Ceramic Wires also feature stainless steel spark plug terminals for maximum spark energy to the plugs.

Additional Fitment Information:
Vehicle Block CC Engine CID
1970 - Jeep Wagoneer V - 8 Cyl 5.7L 350

Accel
  • Heavy Duty; Black
  • Distributor Cap And Rotor Kit; Heavy Duty; Black;
  • Distributor Cap And Rotor Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
  • Features:
    • Offers Superior Protection From Arc-Thru and Crossfire
    • Features 60K V Rated Alkyd Compound
    • Brass Inserts/Steel Rotor Springs Provide High Spark Energy Flow
  • ACCEL cap and rotor kits offer superior protection from "arc-thru" and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Additional Fitment Information:
Vehicle Block CC Engine CID
1970 - Jeep J-3600 V 5733 8 Cyl 5.7L 350

Accel
  • Standard; Shorty Plug For Headers; 4 Pack;0.035 in. Plug Gap
  • U-Groove Spark Plug Header Plug; Standard; Shorty Plug For Headers; 4 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Resistor: No
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
  • Features:
    • Header-Box
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL's patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine CID
1970 - Jeep J-3700 V - 8 Cyl 5.7L 350

Accel
  • 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;0.035 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.1875 In.
    • Reach: 0.375 In.
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.035 In.
  • Features:
    • C-Cut Ground Electrode
    • Resistor Shorty Plugs
    • 14mm Thread - .375 in. Reach
    • Flat/Gasket Seat
    • Projected Tip
    • 13/16 in. Hex
  • ACCEL's patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine Sub Model CID
1970 - Jeep Jeepster V 3687 SF 6 Cyl 3.7L Commando 225

Accel
  • 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;0.030 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
  • Features:
    • Shorty Spark Plugs For Tubular Exhaust Headers
    • Eliminates Dimpling Headers For Added Clearance
    • Improves Spark Plug Access To Fit Socket Or Wrench
    • Shorter Overall Plug Length Vs. OE Style Plug
    • Copper Core Center Electrode
    • Projected Tip
    • Helps Eliminate Burned Spark Plug Boots
    • Shorty Header Spark Plug
  • ACCEL's patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine CID
1970 - Jeep J-3600 V - 8 Cyl 5.7L 350
Showing 1 - 5 of 5 products

Loading...