Image
Product
Price
- Yellow Wire; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Yellow Wire; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Boot Type: Straight
- Engine: Universal 8 Cylinder
- Boot Angle: Straight
- Wire Series: Superstock
- Core Type: Carbon Graphite
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Jeep J10 | V | - | 8 Cyl 5.9L | 360 |
- Spiral Core; 8.8mm; Yellow Wire w/Red Boots; Male Tower Dist. Cap/HEI Boots
- Custom Fit Spark Plug Wire Set; Spiral Core; 8.8mm; Yellow Wire w/Red Boots; Male Tower Dist. Cap/HEI Boots;
- Custom Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8.8mm
- Wire Series: 8.8mm Wire
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: No
- Core Type: Spiral
- Boot Type: Oem
- Wire Temperature Rating: 550 Degree
- Boot Material: Silicone
- Engine: Universal 8 Cylinder
- Resistance: 500 Ohms Per Ft.
- Boot Angle: 90 Degree
-
Features:
- 500 Ohms/ft. Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- Custom-fit Universal And Import Coverage
- Pre And Post HEI Vehicles
- These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Chevrolet K5 Blazer | V | - | 8 Cyl 6.6L | 400 |
- w/HEI Stock Style Boots; 8mm; Graphite Core; Wires Routed Over Valve Cover; Yellow
- Custom Fit Super Stock Spark Plug Wire Set; w/HEI Stock Style Boots; 8mm; Graphite Core; Wires Routed Over Valve Cover; Yellow;
- Custom Fit Super Stock Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: No
- Core Type: Carbon Graphite
- Boot Type: Oem
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Engine: Universal 8 Cylinder
- Resistance: Meets Or Exceeds Oe
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1978 - Buick LeSabre | V | - | 8 Cyl 5.0L | Custom | 305 |
- Black; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Black; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: Straight
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: Straight
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1978 - Buick LeSabre | V | - | 8 Cyl 5.7L | Custom | 350 |
- Socket Style; Tan
- Distributor Cap And Rotor Kit; Socket Style; Tan;
- Distributor Cap And Rotor Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Features Protection From Arc Thru And Crossfire
- Features 60K V Rated Alkyd Compound
- Brass Terminals Inserts And Steel Rotor Springs
- High Spark Energy Flow
- See Catalog For Application Information
- ACCEL cap and rotor kits offer superior protection from arc-thru and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Dodge B100 | V | - | 8 Cyl 5.9L | 360 |
- 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;0.035 in. Plug Gap
- U-Groove Spark Plug Header Plug; 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.1875 In.
- Reach: 0.375 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 8
-
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Dodge B200 | V | 7211 | 8 Cyl 7.2L | 440 |
- 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;0.035 in. Plug Gap
- U-Groove Spark Plug Header Plug; 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.1875 In.
- Reach: 0.375 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 4
-
Features:
- C-Cut Ground Electrode
- Resistor Shorty Plugs
- 14mm Thread - .375 in. Reach
- Flat/Gasket Seat
- Projected Tip
- 13/16 in. Hex
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Dodge CB300 | V | 6556 | 8 Cyl 6.6L | 400 |
- Black; 8mm; Graphite Core; 90 Deg. Boots
- Universal Fit Spark Plug Wire Set; Black; 8mm; Graphite Core; 90 Deg. Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: 90 Degree
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: 90 Degree
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Chrysler Newport | V | 7211 | 8 Cyl 7.2L | 440 |
- HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;CARB E.O. D-221-6
- SuperCoil Ignition Coil; HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;
- SuperCoil Ignition Coil
- Product Attributes:
- Peak Increase in Voltage: 18%
- WARNING CA Proposition 65: Yes
- Turns Ratio: 80:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Maximum Voltage: 45000
- Primary Resistance: .500 Ohms
- Package Quantity: 1
- Secondary Resistance: 8.6k Ohms
-
Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
- Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Chevrolet C10 | V | - | 8 Cyl 6.6L | 400 |
- HEI 4 Pin Module;CARB E.O. D-221-4
- Distributor Control Module; HEI 4 Pin Module;
- Distributor Control Module
- Product Attributes:
- WARNING CA Proposition 65: No
- RPM: Oem
-
Features:
- Fits Most Stock And Modified Distributors
- Solid State Electronics
- Dwell Control Circuit
- This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Buick Regal | V | - | 8 Cyl 5.0L | 305 |
Showing 1 - 10 of 52 products
Loading...