Image
Product
Price
- Yellow Wire; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Yellow Wire; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Boot Type: Straight
- Engine: Universal 8 Cylinder
- Boot Angle: Straight
- Wire Series: Superstock
- Core Type: Carbon Graphite
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Ford E-250 Econoline | V | 5753 | 8 Cyl 5.8L | 351 |
- 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;0.035 in. Plug Gap
- U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;
- U-Groove Resistor Spark Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.750 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.044 In.
- Package Quantity: 4
-
Features:
- Resistor
- Blister Pack
- U-Groove Ground Electrode
- Five-Rib Aluminum Insulator
- Copper Core Nickel/Chrome Steel
- Electric Heat Seal
- Copper-Glass Gas-Tight Seal
- Less Flame Dissipation
- ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1996 - Dodge Ram 1500 | V | 5211 | GAS | 8 Cyl 5.2L | Y | 318 |
- 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;0.060 in. Plug Gap
- U-Groove Resistor Spark Plug; 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;
- U-Groove Resistor Spark Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.708 In.
- Thread Size: 14mm
- Resistor: Yes
- Electrode Material: Copper
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Element Material: Copper
- Gap Size: 0.060 In.
- Package Quantity: 4
-
Features:
- Resistor
- Blister Pack
- U-Groove Ground Electrode
- Five-Rib Aluminum Insulator
- Copper Core Nickel/Chrome Steel
- Electric Heat Seal
- Copper-Glass Gas-Tight Seal
- Less Flame Dissipation
- ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - GMC Sonoma | L | 2190 | 4 Cyl 2.2L | 134 |
- 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;0.050 in. Plug Gap
- U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;
- U-Groove Resistor Spark Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.750 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.044 In.
- Package Quantity: 4
-
Features:
- Resistor
- Blister Pack
- U-Groove Ground Electrode
- Five-Rib Aluminum Insulator
- Copper Core Nickel/Chrome Steel
- Electric Heat Seal
- Copper-Glass Gas-Tight Seal
- Less Flame Dissipation
- ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1996 - Eagle Talon | L | 1996 | 4 Cyl 2.0L | ESi | 122 |
- 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;0.044 in. Plug Gap
- U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;
- U-Groove Resistor Spark Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.750 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.044 In.
- Package Quantity: 4
-
Features:
- Resistor
- Blister Pack
- U-Groove Ground Electrode
- Five-Rib Aluminum Insulator
- Copper Core Nickel/Chrome Steel
- Electric Heat Seal
- Copper-Glass Gas-Tight Seal
- Less Flame Dissipation
- ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1996 - Subaru Legacy | H | 2458 | 4 Cyl 2.5L | Outback | - |
- Black; 8mm; Graphite Core; Straight Boots
- Universal Fit Spark Plug Wire Set; Black; 8mm; Graphite Core; Straight Boots;
- Universal Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: Straight
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: Straight
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Ford F-250 | V | - | 8 Cyl 7.5L | 460 |
- 14mm Thread; .460 in. Reach; Heat Range 5; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;0.035 in. Plug Gap
- U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Heat Range 5; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 4
-
Features:
- Header-Box
- U-Groove Ground Electrode
- Five-Rib Aluminum Insulator
- Copper Core Nickel/Chrome Steel
- Electric Heat Seal
- Copper-Glass Gas-Tight Seal
- Less Flame Dissipation
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1996 - GMC G3500 | V | - | CNG | 8 Cyl 5.7L | Rally | 350 |
- 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0574S-4]; 8 Pack;0.035 in. Plug Gap
- U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0574S-4]; 8 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 8
-
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - GMC K2500 Suburban | V | - | 8 Cyl 7.4L | 454 |
- Double Platinum Shorty; Individual;0.050 in. Plug Gap
- U-Groove Spark Plug Header Plug; Double Platinum Shorty; Individual;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.708 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.060 In.
- Package Quantity: 1
-
Features:
- Double Platinum Electrode For Long Life
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Improves Spark Plug Access To Fit Socket Or Wrench
- Shorter Overall Plug Length Vs. OE Style Plug
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
- Machine Rolled 14mm Threads Protect Your Valuable Cylinder Heads
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1996 - Plymouth Grand Voyager | L | 2429 | 4 Cyl 2.4L | SE | 148 |
- 14mm Thread; 3/4 in Reach; Heat Range 6; 4 Pack;0.035 in. Plug Gap
- U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Heat Range 6; 4 Pack;
- U-Groove Resistor Spark Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.750 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 4
-
Features:
- Resistor
- Blister Pack
- U-Groove Ground Electrode
- Five-Rib Aluminum Insulator
- Copper Core Nickel/Chrome Steel
- Electric Heat Seal
- Copper-Glass Gas-Tight Seal
- Less Flame Dissipation
- ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1996 - Jeep Cherokee | L | - | 4 Cyl 2.5L | SE | 150 |
Showing 1 - 10 of 53 products
Loading...