2001 Accel Parts


Showing 1 - 10 of 26 products
Image
SKU
Product
Rating
Price

Accel
  • 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;0.035 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.750 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.044 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine CID
2001 - Dodge Ram 2500 Van V 5211 8 Cyl 5.2L 318

Accel
  • 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;0.044 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.750 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.044 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2001 - Mitsubishi Eclipse L 2351 4 Cyl 2.4L RS -

Accel
  • 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;0.060 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.708 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • Electrode Material: Copper
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Element Material: Copper
    • Gap Size: 0.060 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2001 - Chevrolet Cavalier L 2190 4 Cyl 2.2L LS 134

Accel
  • 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;0.040 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.750 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.044 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine CID
2001 - Dodge Durango V - 8 Cyl 5.9L 360

Accel
  • 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;0.050 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.750 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.044 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle
2001 - Saturn L100

Accel
  • Double Platinum Shorty; Individual;0.060 in. Plug Gap
  • U-Groove Spark Plug Header Plug; Double Platinum Shorty; Individual;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.708 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.060 In.
    • Package Quantity: 1
  • Features:
    • Double Platinum Electrode For Long Life
    • Shorty Spark Plugs For Tubular Exhaust Headers
    • Eliminates Dimpling Headers For Added Clearance
    • Improves Spark Plug Access To Fit Socket Or Wrench
    • Shorter Overall Plug Length Vs. OE Style Plug
    • Projected Tip
    • Helps Eliminate Burned Spark Plug Boots
    • Shorty Header Spark Plug
    • Machine Rolled 14mm Threads Protect Your Valuable Cylinder Heads
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2001 - Chevrolet Camaro V 3800 6 Cyl 3.8L Base 231

Accel
  • 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;0.060 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.708 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • Electrode Material: Copper
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Element Material: Copper
    • Gap Size: 0.060 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2001 - Pontiac Firebird V - 8 Cyl 5.7L Trans Am 350

Accel
  • 14mm Thread; .708 in. Reach; Heat Range 6; 8 Pack;0.060 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; .708 in. Reach; Heat Range 6; 8 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.708 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • Electrode Material: Copper
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Element Material: Copper
    • Gap Size: 0.060 In.
    • Package Quantity: 8
  • Features:
    • Platinum And Iridium Plugs Are Less Electrically Conductive
    • Copper Dissipates Heat Much Better Than Other Materials
    • C-Cut Design/Un-Shrouding The Spark Kernel
    • Open Gap For Larger Spark Kernel/Close It For Boosted Application
    • Machine Rolled Threads For Precise Thread Engage/Torque Retention
    • Whether Street/Strip
    • Accel Copper Core Spark Plugs Will Deliver
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2001 - Pontiac Firebird V - 8 Cyl 5.7L Trans Am 350

Accel
  • 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;0.050 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.708 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • Electrode Material: Copper
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Element Material: Copper
    • Gap Size: 0.060 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2001 - Ford Explorer V - 8 Cyl 5.0L Eddie Bauer 302

Accel
  • 14mm Thread; .708 in. Reach; Heat Range 6; 8 Pack;0.050 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; .708 in. Reach; Heat Range 6; 8 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.708 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • Electrode Material: Copper
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Element Material: Copper
    • Gap Size: 0.060 In.
    • Package Quantity: 8
  • Features:
    • Platinum And Iridium Plugs Are Less Electrically Conductive
    • Copper Dissipates Heat Much Better Than Other Materials
    • C-Cut Design/Un-Shrouding The Spark Kernel
    • Open Gap For Larger Spark Kernel/Close It For Boosted Application
    • Machine Rolled Threads For Precise Thread Engage/Torque Retention
    • Whether Street/Strip
    • Accel Copper Core Spark Plugs Will Deliver
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2001 - Ford Explorer V - 8 Cyl 5.0L XLT 302
Showing 1 - 10 of 26 products

Loading...