Image
Product
Price
- BD 5.9L Cummins VE Pump Fuel Pin & Spring Kit Dodge 1989-1993
- VE Fuel Pump;
- BD 5.9L Cummins VE Pump Fuel Pin & Spring Kit Dodge RAM 250/350 1989-1993
- VE Pin & Spring Kit
- Product Attributes:
- Category: Parts & Accessories
- Engine: 5.9l Cummins 89-93
- Suggested Product: 1061835
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Increases of 30-40 hp and 90-100 ft. lbs. of torque
- Increases power band by a whopping 30%!
- Made from high quality chromoly steel
- Pins heat treated to the 52 Rockwell hardness scale
- Dual machine process overcomes wear patterns and resulting failure
- 3200 rpm governor spring extends engine rev range by 700 rpm
- New low-profile spacer washer and new throttle shaft O-ring
- BD's VE pump Fuel Pin & Governor Spring gives your 1988-1993 Cummins 5.9L powered Dodge truck a new lease on life. Not only does it give you increases of 30-40hp and 90-100 ft. lbs. of torque, it also increases your power band by a whopping 30%! To top it off, these incredible increases are achieved with a fairly simple installation requiring minimal tools and approximately 2-3 hours of your time. You will not believe you are driving the same truck! Made from high quality Chromalloy steel, our pins are machined with a duel process that are first rough milled with a precision radius angle cut, heat treated to the 52 Rockwell hardness scale, then a final precision ground radius cut - this process overcomes wear patterns and resulting failure. Included is our 3200 rpm governor spring to extend the engine rev range by and 700 rpm, new low-profile spacer washer and new throttle shaft o-ring.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Dodge W350 | L | - | 6 Cyl 5.9L | 359 |
- BD Diamond Bite Shim Kit - Dodge 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- 47RH / 47RE / 48RE / 68RFE transmissions;
- BD Diamond Bite Shim Kit - Dodge/RAM 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- Flexplate Friction Shim
- Product Attributes:
- Category: Flex Plates
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041208
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Diamond embedded electroless nickel coating creates a micro-bite between the flexplate surfaces
- Significant friction increase protects your flexplate from slipping
- Allows handling of much higher loads and bigger horsepower numbers
- Recommended for high output and heavy duty applications
- You ask a lot from your flexplate. The forces they're put under are extreme and in high performance applications the flexplate can slip; even with correctly installed and torqued bolts! It only takes a small amount movement for the bolts to loosen and allow the flexplate to oscillate against the crankshaft causing costly and catastrophic damage to both parts. BD Diamond Bite Shims with a diamond embedded electroless nickel coating create a micro-bite between the flexplate surfaces giving a significant friction increase. This friction increase stops your flexplate from slipping, allowing it to handle the much higher torque loads expected from a diesel engine. Recommended for high output and heavy duty cummins 1994-up 5.9L/6.7L applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Dodge W250 | L | - | 6 Cyl 5.9L | 359 |
- Turbine Housing, 16cm - 1988-1993 Dodge
- 16cm non-wastegated;
- Turbine Housing, 16cm - 1988-1993 Dodge 5.9L Cummins
- Turbine Housing
- Product Attributes:
- Category: Components
- Engine: 5.9l Cummins 89-93
- Suggested Product: 1061835
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 16cm non-waste gated, dual throat housing
- Replaces the 18cm and 21cm housings
- This 16cm non-waste gated, dual throat housing replaces the 18cm and 21cm housings on the 1988-1993 Dodge 5.9L Cummins engines.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Dodge W350 | V | - | 8 Cyl 5.9L | 360 |
- Exhaust Pulse Manifold - Dodge 1988-1998 5.9L 12-valve
- 3 pc.; Use w/12 Valve Motor;
- Exhaust Pulse Manifold - Dodge 1988-1998 5.9L Cummins 12-valve D250/D350/W250/W350/Ram 2500/Ram 3500
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040277
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- High-silicon ductile iron
- Designed to withstand extreme temperatures and vibration
- Connection joints allows for expansion and contraction
- Prevents cracking or exhaust leaks
- Includes BD Bolt & Spacer Kit
- Gaskets are available separately (PN: 1045981)
- The perfect drop-in replacement. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Designed using modern technology to ensure optimal internal geometry. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Dodge W350 | V | - | 8 Cyl 5.9L | 360 |
- Exhaust Brake - 1989-1998 Dodge 60psi no-APPS 4in Vac/Remote
- Remote Vac 4 in.; No APPS; Turbo Mount Brakes Require Down Pipe Kit PN[1040050]
- Exhaust Brake - 1989-1998 Dodge 5.9L Cummins 60psi no-APPS 4-inch Remote Mount / Vacuum Actuated
- Exhaust Brake
- Product Attributes:
- Category: Mechanical Exhaust Brakes
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1300535
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD's exclusive Variable Orifice Technology
- Piston ring-seals
- Stainless steel butterfly shaft
- Proven to stand-up under the harsh, high heat conditions of the exhaust environment
- BD's solid, offset butterfly
- All mounting hardware are made of corrosion resistant stainless steel
- There's a reason why the BD Brake is the most widely-recognized diesel exhaust brake in the industry: It's the best! Compare it to the competition, and you'll see why.
- Spring loaded cylinder
- Pressure regulation
- Provides up to 150 retarding horsepower throughout the engine's RPM range
- Rugged, cast-iron housings
- BD's exclusive alumibronze bushing
- It has been almost 30 years since we started shipping our first exhaust brakes. With that many hill and mountain roads experienced, we used the knowledge gained to continue to deliver the best designed exhaust brake for your application. Incorporating BD's exclusive Variable Orifice Technology, BD's solid, offset butterfly, spring loaded cylinder and pressure regulation provides up to 150 retarding horsepower throughout the engine's RPM range - not just at high rpm like some designs that use holes or additional parts and claim it as a better idea. A range of rugged, cast-iron housings for Dodge, Ford, Chevy and motor home applications that incorporate BD's exclusive alumibronze bushing, piston ring-seals and stainless steel butterfly shaft has proven to stand-up under the harsh, high heat conditions of the exhaust environment. BD's butterfly valve and rotating shaft are made of stainless steel to resist corrosion. An air compressor is included in most kits for newer pick-up trucks.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Dodge W250 | L | - | 6 Cyl 5.9L | 359 |
- BD AutoLoc Ford 1990-2003 7.3L / Dodge 1994-2005 5.9L / Chevy 1992-2000 6.5LT
- BD AutoLoc Exhaust Brake Converter Control Ford 1990-2003 7.3L / Dodge 1994-2005 5.9L / Chevy 1992-2000 6.5LT
- AutoLoc
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1030398
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Maintains lock-up when the exhaust brake is activated
- Ensuring 100% of the retarding force is being transferred in 3rd and 4th gears
- Prevents slippage and subsequent high oil temperatures
- Currently, exhaust brake usage can cause high temperatures in the automatic transmission due to torque converter slippage. Only 10% to 80% of the retarding force is transferred through the fluid coupling of most torque converters. The BD AutoLoc commands the lock-up clutch of the torque converter to stay engaged when the BD Exhaust Brake is activated. This allows up to 100% of the retarding force to be transferred while in 3rd and 4th gear. Also, transmission oil temperatures will remain low because of little or no slippage occurring in the converter in these gears.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - GMC C3500 | V | - | 8 Cyl 6.5L | 395 |
- Cool Cover - Dodge 1988-1998 12-valve 5.9L (Set of 6)
- Black Powdercoated Cast Aluminum; Includes Gasket; 6 pc.;
- Cool Cover - Dodge 1988-1998 Cummins 5.7L 12-valve (Set of 6)
- Cool Cover
- Product Attributes:
- Category: Valve Covers
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1030060
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Made from cast aluminum
- Black powder coated with machined fin tops for a clean look
- Replaces the OEM valve covers to add a little more detail to your engine
- Covers come with new gaskets and are sold separately or in a set of six
- Single covers also available = p/n 1061800
- Are you looking to dress up your 12-valve 5.9L Cummins motor? Try BD's Cool Covers for the 1988-1998 12v Dodge Cummins. Made from cast aluminum and black powder coated with machined fin tops for a clean look, these covers replace the OEM valve covers and add a little more detail to your 12v Cummins engine. Covers come with new gaskets and are sold separately or in a set of six.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Dodge W350 | L | - | 6 Cyl 5.9L | 359 |
- BD 5.9L Cummins Exhaust Manifold Gasket Set Dodge 1988-1998 12-valve
- BD 5.9L Cummins Exhaust Manifold Gasket Set Dodge 1988-1998 12-valve D250/D350/W250/W350/Ram 2500/Ram 3500
- Exhaust Manifold Gaskets
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1045989
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Includes gaskets for cylinder head to manifold & manifold to turbo
- Exhaust Manifold Gasket Kit for 1045980, 1045980SS and 1045989 12-valve Manifolds
- Includes gaskets for cylinder head to manifold & manifold to turbo; Exhaust Manifold Gasket Kit for 1045980, 1045980SS and 1045989 12-valve Manifolds
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Dodge W350 | L | - | 6 Cyl 5.9L | 359 |
- BD 5.9L Cummins Valve Spring Kit 60lbs Dodge 1988-1998 12-valve
- BD 5.9L Cummins Valve Spring Kit 60lbs Dodge 1988-1998 12-valve - Set of 6
- Valve Spring Set
- Product Attributes:
- Category: Mechanical Exhaust Brakes
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 2033135
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Set of 6 springs that can be used on either the exhaust or intake valves in 12-valve 5.9L Cummins engines
- Replacement exhaust valve springs to allow for 60psi of back pressure with Exhaust Brakes
- Heavy-duty intake valve springs for high RPM P7100 kits or performance camshaft applications
- If installing an Exhaust Brake and P7100 Kit at same time, 2 sets of springs required
- Set of 6 springs that can be used on either the exhaust or intake valves in 12-valve 5.9L Cummins engines; Replacement exhaust valve springs to allow for 60psi of back pressure with Exhaust Brakes; Heavy-duty intake valve springs for high RPM P7100 kits or performance camshaft applications; If installing an Exhaust Brake and P7100 Kit at same time, 2 sets of springs required
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Dodge W250 | L | - | 6 Cyl 5.9L | 359 |
- BD Cummins Killer Frost Plug Plate - Dodge 1989-2002 5.9L
- Works with and without a TCC crossover tube;
- BD Cummins Killer Frost Plug Plate - Dodge 1989-2002 5.9L Cummins
- Killer Frost Plug Plate
- Product Attributes:
- Category: Killer Frost Plug Plate
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1040182
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Works with the frost plug in place, blown out, or leaking
- No need to punch the old frost plug out
- Utilizes one large #333 O-ring
- Works with and without a TCC crossover tube
- Perfect time to install one is when the transmission is removed!
- The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Dodge W350 | L | - | 6 Cyl 5.9L | 359 |
Showing 1 - 10 of 25 products
Loading...