Image
Product
Price
- BD Dodge Steering Box Stabilizer 2wd Ram 1994-2002 2500/3500 & 1994-2001 1500
- 2wd;
- BD Dodge Steering Box Stabilizer (SBS) 2wd Ram 1994-2002 2500/3500 & 1994-2001 1500
- Steer Box Stabilizer
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1061501
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- The Wobble Stopper
- Eliminates steering wander and wobble caused by excessive shaft play in the steering box
- Designed for easy, bolt-in installation in about an hour
- Virtually eliminates frame flex at the steering box mounting point
- More positive steering feel
- Silver vein powder coated for corrosion resistance
- Greaseable, high-quality bearing for reliable operation
- High-strength mounting hardware
- Gas & Diesel
- BD's Steering Box Stabilizer (SBS) eliminates steering wander and wobble caused by excessive shaft play in the steering box of late-model Dodge trucks. Designed for easy, bolt-in installation in about an hour, the SBS virtually eliminates frame flex at the steering box mounting point, resulting in more positive steering feel. The BD SBS is powder coated for corrosion resistance, and features a greaseable, high-quality bearing for reliable operation. The SBS comes complete with high-strength mounting hardware and instructions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 2500 | V | 5211 | 8 Cyl 5.2L | 318 |
- BD Dodge Track Bar Kit 1994-2002 Ram 2500/3500 4wd
- 4wd;
- BD Dodge Track Bar Kit 1994-2002 Ram 2500/3500 4wd (Gas/Diesel)
- Adjustable Track Bar
- Product Attributes:
- Engine: Gasoline
- Suggested Product: 1032050
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Helps eliminate "Death Wobble" in lifted trucks
- High quality black Cerakote finish, which resists corrosion and doesn't flake off like powder coat when hit by road debris
- Drive straighter with less wander and more positive steering feel
- Long lasting, easily serviceable polyurethane bushings
- Perfect solution for steering stability
- Replacement Poly bushing set available p/n 1302033-1
- Gas & Diesel
- Includes frame bracket to eliminate factory ball joint design
- Fully Adjustable
- Allow for correct axle alignment on lifted trucks up to 6-inches on Ford and 4-inches on Dodges
- No need to remove bar from the truck to adjust
- Made from high strength, heat treated forged components
- BD's fully Adjustable Track Bar can not only accommodate lifted trucks up to 4-inches, but there is no need to remove the bar from the truck to adjust. The Black Cerakoted Adjustable Track Bar will allow for correct axle alignment on lifted trucks so they drive straighter with less wander and more positive steering feel. Installation kit comes with long lasting, easily serviceable polyurethane bushings. BD's Adjustable Track Bar is the perfect solution for steering stability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | V | 7990 | 10 Cyl 8.0L | 488 |
- P7100 Fuel Control Plate #6 - Dodge 1994-1998 5.9L
- Plate # 6;
- P7100 Fuel Control Plate #6 - Dodge RAM 2500/3500 1994-1998 5.9L 12-Valve Engine
- Fuel Stop
- Product Attributes:
- Fuel Plate No: #6
- Category: Parts & Accessories
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040186
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Commonly known as a "cam plate
- 1996-1998 Auto 180 HP 420 lbs.-ft --> 250 HP / 635 lbs.-ft (Stock autos will require modifications to handle torque)
- 1996-1998 Auto/Man CALIF 180 HP 420 lbs.-ft --> 250 HP / 635 lbs.-ft (Stock autos will require modifications to handle torque)
- Controls the rack travel which affects the amount of fuel the P7100 fuel pump delivers
- 1996-1998 Man 215 HP 440 lb.-ft --> Not recommended
- Six different ramp designs
- Power gains from 30 to 150 hp and 70 to 300 lb.-ft. of torque
- Calibrated boost tube orifice improves turbo performance
- Strong knowledge of P7100 pump required
- 1994-1995 Auto 160 HP 400 lbs.-ft CPL#'s 1549, 1815, 1959, 1968 --> 230 HP / 605 lbs.-ft
- 1994-1995 Man 175 HP 420 lbs.-ft --> 250 HP / 635 lbs.-ft
- Commonly known as a "cam plate", BD's Fuel Stop Plate controls the rack travel, which affects the amount of fuel the Bosch P7100 fuel pump delivers. Six different ramp designs enable power gains from 30 to 150 hp and 70 to 300 lb.-ft. of torque. A calibrated boost tube orifice is included to improve turbo performance. Strong knowledge of Bosch P7100 pump required.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Injector Set 45HP - Dodge 1994-1998 5.9L 12-Valve
- 12-Valve engine; Set of 6-injectors; 45 hp;
- Injector Set 45HP - Dodge RAM 2500/3500 1994-1998 5.9L 12-Valve Engine
- Perfromance Injector Set
- Product Attributes:
- Category: Performance Injectors & Nozzles
- Power Level: 45 Hp
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040187
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Flow-enhanced exchange fuel injectors
- Highest degree of accuracy
- Comes with boost orifice elbow fitting
- VCO Type 145-degree 5 Hole
- Replace your stock injectors with BD's flow-enhanced exchange fuel injectors with new VCO Type 145-degree 5 Hole nozzles and Highest degree of accuracy.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Injector Set 120HP - Dodge 1994-1998 5.9L 12-Valve
- 12-Valve engine; Set of 6-injectors; 120 hp;
- Injector Set 120HP - Dodge RAM 2500/3500 1994-1998 5.9L 12-Valve Engine
- Perfromance Injector Set
- Product Attributes:
- Category: Performance Injectors & Nozzles
- Power Level: 120 Hp
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040187
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Flow-enhanced exchange fuel injectors
- Highest degree of accuracy
- Comes with boost orifice elbow fitting
- SAC Type 145-degree 5 Hole
- Replace your stock injectors with BD's flow-enhanced exchange fuel injectors with new VCO Type 145-degree 5 Hole nozzles and Highest degree of accuracy.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Diamond Bite Shim Kit - Dodge 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- 47RH / 47RE / 48RE / 68RFE transmissions;
- BD Diamond Bite Shim Kit - Dodge/RAM 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- Flexplate Friction Shim
- Product Attributes:
- Category: Flex Plates
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041208
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Diamond embedded electroless nickel coating creates a micro-bite between the flexplate surfaces
- Significant friction increase protects your flexplate from slipping
- Allows handling of much higher loads and bigger horsepower numbers
- Recommended for high output and heavy duty applications
- You ask a lot from your flexplate. The forces they're put under are extreme and in high performance applications the flexplate can slip; even with correctly installed and torqued bolts! It only takes a small amount movement for the bolts to loosen and allow the flexplate to oscillate against the crankshaft causing costly and catastrophic damage to both parts. BD Diamond Bite Shims with a diamond embedded electroless nickel coating create a micro-bite between the flexplate surfaces giving a significant friction increase. This friction increase stops your flexplate from slipping, allowing it to handle the much higher torque loads expected from a diesel engine. Recommended for high output and heavy duty cummins 1994-up 5.9L/6.7L applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD 7.3L Powerstroke Flexplate 4R100/E4OD Ford 1994-2003
- 4R100/E4OD Transmission;
- BD 7.3L Powerstroke Flexplate 4R100/E4OD Ford 1994-2003 Pick-Up/SUV/Van
- Flex Plate
- Product Attributes:
- Category: Flex Plates
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1061716
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 1.5 times thicker than stock
- Balanced to OE specifications
- One piece billet machined with integrated counterweight
- Manufactured from Quench and Tempered Steel with a Yield strength of 100,000psi
- Not affected by hydrogen embrittlement caused by zinc plating, which can drastically reduce strength
- Black oxide coated
- Heat treated and hardened ring gear to last longer
- Fits any OEM or aftermarket torque converter
- BD's FleX-Plate is CNC machined 1.5x thicker out of quench and tempered 100ksi steel. In-house machining incorporates integrated counterweights which are then balanced to better than OE specifications. Black Oxide coated to resist corrosion and prevents hydrogen embrittlement that can cause cracking, these units will fit any OEM or aftermarket torque converter and affordable enough to replace with converter or transmission swap. The BD FleX-Plate is a direct, bolt-in replacement for the stock unit. Great for racing, towing or stock!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Ford F-250 HD | V | - | 8 Cyl 7.3L | 445 |
- BD Super B Killer SX-E S363 Turbo Kit - Dodge 1994-2002 5.9L c/w HX40 Down Pipe
- SX-E S363; HX40; Includes Down Pipe No Turbo Mount Exhaust Brakes/Use Remote Mount Exhaust Brake~Not For Sale on Licensed California Vehicles
- BD Super B Killer SX-E S363 Turbo Kit - Dodge 1994-2002 5.9L 24-valve c/w HX40 Down Pipe
- Super B Killer Turbo Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Category: Single Turbo Performance
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1715865
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single Turbo kits cover a range of turbos that are an easy complete bolt-on performance replacement for your OEM turbo, providing enough air for more power, response and reliability
- BD's HD Waste gate and bracket holds boost and prevents over speed damage
- Turnbuckle Boost Control allows for ease of adjustment for altitude and extreme tuning
- Kit comes with downpipe, V-band clamp, band clamp
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 76mm 2.99in
- A/R Ratio: 0.80
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- Larger compressor blade surface but with a smaller inducer results in quicker spooling, more flow than similar sized wheels
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- BD exclusive feature of a heavy sprung waste-gated T3 turbine housing that mounts onto stock exhaust manifolds
- All kits come with everything you need to allow for an easy install. Now get these kits with Borg Warner SX-E turbo options and expect even more. A BD exclusive feature of the SX-E turbos is that they are waste-gated to mount on stock T3 manifolds.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Exhaust Pulse Manifold - Dodge 1988-1998 5.9L 12-valve
- 3 pc.; Use w/12 Valve Motor;
- Exhaust Pulse Manifold - Dodge 1988-1998 5.9L Cummins 12-valve D250/D350/W250/W350/Ram 2500/Ram 3500
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040277
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- High-silicon ductile iron
- Designed to withstand extreme temperatures and vibration
- Connection joints allows for expansion and contraction
- Prevents cracking or exhaust leaks
- Includes BD Bolt & Spacer Kit
- Gaskets are available separately (PN: 1045981)
- The perfect drop-in replacement. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Designed using modern technology to ensure optimal internal geometry. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Turbo T3/T4 Mounting Kit - Dodge 5.9L 1994-2007 HX / HY / S300 / S400
- For HX, HY, S300 and S400 turbos with T3 or T4 mount;
- BD Turbo T3/T4 Mounting Kit - Dodge 5.9L 1994-2007 HX / HY / S300 / S400 RAM 2500/3500
- Turbo Mounting Kit
- Product Attributes:
- Category: Components
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1045947
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Kit Contents:
- 1 of T3 Open Gasket
- 1 of T4 Split Gasket
- 1 of Oil Drain Gasket
- All Fasteners are at least Class 8.8
- 4 of M10 Small Diameter Flange Nut
- 4 of M10 x 26mm studs
- 4 of M10 x 30mm studs
- 2 of M10 Washers
- 2 of M10 x 45mm Stainless Steel SHCS
- 1 of T3 Split Gasket
- Need to RE&RE your turbo? This handy kit has all the necessary hardware for your turbo re-install to help prevent leaks and to replace any older studs that might be prone to future breakage. Kits includes gaskets, studs and miscellaneous hardware to install T3 & T4 mounted turbos.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
Showing 1 - 10 of 122 products
Loading...