Image
Product
Price
- BD HI5 12-Bolt Flexplate - Dodge 1994-2007 47RE/48RE
- Fits any OEM or aftermarket torque converter; Meets SFI 29.3 Approval;
- BD HI5 12-Bolt Flexplate - Dodge RAM 1994-2007 47RE/48RE
- Flex Plate 12-Bolt
- Product Attributes:
- Category: Torque Converters
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1041209
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 12 bolt holes to help prevent shearing
- Allows axial thrust unlike solid flywheel conversions
- Fits any OEM or aftermarket torque converter
- Direct, bolt-in replacement for the stock unit
- BD Diamond Bite Shims included
- Meets SFI 29.3 Approval!
- Reliably handle up to 3,500 lb.-ft of torque
- Twice the material of the stock flex plate
- Forged billet
- Precision-balanced
- Black Oxide coated to resist corrosion and prevents hydrogen embrittlement caused by common zinc plating
- Under high torque applications, the bolts between the torque converter and flex plate can slip. Eliminate this failure with twice the clamping load. The BD 12-bolt flexplate, which includes BD's Diamond Bite Shims, maximize torque holding capacity. The BD Flex Plate is proven to handle up to 3500 lb.-ft of torque. The matching 12-bolt Hi5 torque converter is required to utilize all 12 bolts. A standard 6-bolt torque converters can still be installed using only 6 bolts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- Up-Pipes Kit Ford 7.3L PowerStroke 1999.5-2003 F-250 / F-350 / Excursion / E-350
- Includes Pipes; Turbo Y Adapter; Donut Gaskets And Hardware;
- Up-Pipes Kit Ford 7.3L Power Stroke 1999.5-2003 F-250 / F-350 / Excursion / E-350
- UpPipes
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1057025
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Replaces factory exhaust feed system which is prone to leakage
- Prevents loss of turbo drive pressure and increased EGT's
- Crush donuts replaced with stainless steel gaskets for extended sealing life
- Maximizes transfer of heat energy to the turbo
- Less restrictive, internally shielded expansion bellows
- Reduces the chance for piping burn out
- High-silicon ductile iron Y-adapter
- 304L 2-inch stainless tubing prevents loss of heat energy and will not corrode like aluminized steel or 409 stainless
- Larger diameter 304 stainless steel Up-Pipes includes internally shielded stainless steel expansion bellows
- Replaces the factory exhaust up-pipes (exhaust manifold to the turbo) which are prone to leakage due to the deterioration. BD up-pipes are designed to minimize restriction to the turbo utilizing internally shielded expansion bellows .The turbo Y-adapter is made from high-silicon ductile iron. The BD up-pipes are a durable, longer-life replacement for this common problem and are perfect as an upgrade while performing other engine or transmission repairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Excursion | V | - | 8 Cyl 7.3L | 445 |
- Exhaust Pulse Manifold - Dodge 1998.5-2002 5.9L 24-valve
- 3 pc.; Use w/24 Valve Motor;
- Exhaust Pulse Manifold - Dodge 1998.5-2002 5.9L Cummins 24-valve 2500/3500
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1075821
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Fully divided pulse manifold design
- Pre-drilled for pyrometer probes
- High-silicon ductile iron
- Designed to withstand extreme temperatures and vibration
- Great for stock and performance installations
- Connection joints allows for expansion and contraction
- Prevents cracking or exhaust leaks
- Gasket, Bolt and Spacers kits are available separately
- Replaces Cummins # 3946036
- The perfect drop-in replacement. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Designed using modern technology to ensure optimal internal geometry. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge 1998.5-2018
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge/RAM 1998.5-2018
- Exhaust Manifold Bolt Kit
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Grade 10.9 Hardware meets a balance of high strength and high toughness
- Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield
- Black Oxide coating matches BD manifolds
- Non-Zinc-plated fasteners prevent zinc embrittlement
- Qty 12 Flange Head exhaust bolts (M10x1.5 - 60mm 10.9)
- Qty 12 Black Oxide exhaust spacers
- Qty 2 Stainless Steel Socket Bolts (M10x1.5 - 35mm)
- Qty 2 Stainless Steel M10 Washer
- Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD's class 10.9 bolts and black oxide spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- BD Turbo T3/T4 Mounting Kit - Dodge 5.9L 1994-2007 HX / HY / S300 / S400
- For HX, HY, S300 and S400 turbos with T3 or T4 mount;
- BD Turbo T3/T4 Mounting Kit - Dodge 5.9L 1994-2007 HX / HY / S300 / S400 RAM 2500/3500
- Turbo Mounting Kit
- Product Attributes:
- Category: Components
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1045947
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Kit Contents:
- 1 of T3 Open Gasket
- 1 of T4 Split Gasket
- 1 of Oil Drain Gasket
- All Fasteners are at least Class 8.8
- 4 of M10 Small Diameter Flange Nut
- 4 of M10 x 26mm studs
- 4 of M10 x 30mm studs
- 2 of M10 Washers
- 2 of M10 x 45mm Stainless Steel SHCS
- 1 of T3 Split Gasket
- Need to RE&RE your turbo? This handy kit has all the necessary hardware for your turbo re-install to help prevent leaks and to replace any older studs that might be prone to future breakage. Kits includes gaskets, studs and miscellaneous hardware to install T3 & T4 mounted turbos.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- Gasket Set, Exhaust Manifold T4 Mount - Dodge 1998.5-2018 5.9L/6.7L
- T4 Turbo Mount Flange;
- Gasket Set, Exhaust Manifold T4 Mount - Dodge/RAM 1998.5-2018 5.9L/6.7L
- Manifold Gasket Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Exhaust Manifold Gasket Kit for T4 mount 1045995-T4 / 1045996-T4 manifolds
- Exhaust Manifold Gasket Kit includes six cylinder and T4 turbo mount gaskets.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- Exhaust Pulse Manifold w/T6 Mount / 20-degree - Dodge 1998.5-2007 5.9L
- T6 Turbo Mount Flange;
- Exhaust Pulse Manifold withT6 Mount / 20-degree - Dodge 1998.5-2007 5.9L
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Gasket, Bolt and Spacers kits are available separately
- Heavy cast HiSi Ductile Iron retains heat energy
- High temperature black coated
- Drilled and tapped 1/8-NPT ports
- Thick walls allows for drilling/tapping of individual cylinder pyro ports
- Larger runner size helps enhance flow through the manifolds
- Heat expansion joints prevents cracking
- Intended for installation with competition turbos
- Some modifications to vehicle/engine components will be necessary
- No restriction throughout rpm
- Cast ports and runners match inlet gasket within 0.03
- Center Mount can face down or up
- Optimum 20 degree flange helps mounting S400, S500 other larger turbochargers
- Replacement manifolds with larger T4 and T6 flanges for changing out the stock turbo. The turbo stays in same stock location. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Great for performance trucks wanting to increase airflow. Designed using modern technology utilizes pulse flow for quicker turbo spool and increased power. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Cummins 20-degree Wastegated T6 Exhaust Manifold Dodge 1998.5-2007 5.9L
- T6 Turbo Mount Flange; 45mm Wastegate capped port;
- BD Cummins 20-degree Wastegated T6 Exhaust Manifold Dodge/RAM 1998.5-2007 5.9L
- Wastegated Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045996-wgk
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Gasket, Bolt and Spacers kits are available separately
- Better cylinder exhaust evacuation to keep EGTs down
- Combustion Pulse remains constant with the W/G valve closed
- Machined for use with 45mm Hyper Gate or Turbo Smart
- Block off plate and clamp provided
- Gate port area is 1.67 sq. in. - 33% of T4 / 12% of T6 inlet
- Improves turbo response
- Protect your turbocharger with a performance manifold designed with a waste gate in mind. Cast and machined wastegate port completely divides the manifold into two sections to retain the divided pulse manifold flow. Internal geometry is optimized through Computational Fluid Dynamics (CFD), which increases flow throughout the RPM band for your high flowing T4 of T6 based turbo. Thick-wall cast high silicone ductile iron retains heat energy. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity. 1/8-NPT ports are pre-drilled and tapped.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- BD VP44 Stealth Pump Cover Kit Dodge 24-valve 1998-2002
- Read instructions very carefully - not doing so could damage pump;
- BD VP44 Stealth Pump Cover Kit Dodge 24-valve 5.9L Cummins 1998-2002 Ram 2500/3500
- VP44 Stealth Cover
- Product Attributes:
- Category: Parts & Accessories
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1050332
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Secure, sealed connection instead of notching the pump wire for aftermarket modules
- Clean install
- More reliable connection
- The BD Stealth Cover for the 1998.5 to 2002 Dodge 24v fits onto the VP44 injection pump, providing a secure, sealed connection instead of notching the pump wire for aftermarket modules. A notched wire is not only noticeable, but, a break in the wire cover can result in corrosion and a poor connection. The Stealth Cover from BD makes for a clean install and provides a more reliable connection. A must for the enthusiasts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Banjo Bolt Upgrade Kit - 2000-2002 Dodge
- Banjo Bolt Upgrade Kit - 2000-2002 Dodge 5.9L 24-valve Cummins
- Banjo Bolt Kit
- Product Attributes:
- Category: Parts & Accessories
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1081130
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Significantly increase flow
- Replaces banjo bolts on OEM lift pump, fuel filter and VP44 pump inlet
- Includes port for monitoring fuel pressure gauge kit or Low Fuel Pressure LED Alarm Kit
- Significantly increase the flow in your 1999-2002 Dodge fuel system with upgraded banjo bolts on the OEM lift pump, fuel filter and at the inlet of the VP44 injection pump. Includes a port for monitoring fuel pressure with a gauge kit or with Low Fuel Pressure LED Alarm Kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
Showing 1 - 10 of 170 products
Loading...