2000 Ford BD Diesel Parts
Choose a Model for your 2000 Ford
Image
Product
Price
- Up-Pipes Kit Ford 7.3L PowerStroke 1999.5-2003 F-250 / F-350 / Excursion / E-350
- Includes Pipes; Turbo Y Adapter; Donut Gaskets And Hardware;
- Up-Pipes Kit Ford 7.3L Power Stroke 1999.5-2003 F-250 / F-350 / Excursion / E-350
- UpPipes
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1057025
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Replaces factory exhaust feed system which is prone to leakage
- Prevents loss of turbo drive pressure and increased EGT's
- Crush donuts replaced with stainless steel gaskets for extended sealing life
- Maximizes transfer of heat energy to the turbo
- Less restrictive, internally shielded expansion bellows
- Reduces the chance for piping burn out
- High-silicon ductile iron Y-adapter
- 304L 2-inch stainless tubing prevents loss of heat energy and will not corrode like aluminized steel or 409 stainless
- Larger diameter 304 stainless steel Up-Pipes includes internally shielded stainless steel expansion bellows
- Replaces the factory exhaust up-pipes (exhaust manifold to the turbo) which are prone to leakage due to the deterioration. BD up-pipes are designed to minimize restriction to the turbo utilizing internally shielded expansion bellows .The turbo Y-adapter is made from high-silicon ductile iron. The BD up-pipes are a durable, longer-life replacement for this common problem and are perfect as an upgrade while performing other engine or transmission repairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Excursion | V | - | 8 Cyl 7.3L | 445 |
- DI Code AE; 1833640C1; Remanufactured Core Deposit Required
- Fuel Injector; DI Code AE; 1833640C1; Remanufactured;
- Fuel Injector
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Fuel Rate: N/a
-
Features:
- Remanufactured By UpTime Parts/Pure Power Technologies
- Each Injector Is 100 Perfect Flow Tested
- Each Injector Is Nitrogen Tested For Leaks
- Flow Volume/Leakage Rate/Max Needle Lift /V. Opening All Tested
- All Sealing Surfaces Are Refinished
- Sealing Surfaces Maintain Less Than 2 Microns Of Flatness
- Precision Honed Intensified Body Matched w/New Plungers
- Operates At Extreme Pressures And Temperatures
- Quality OEM Injector At An Aftermarket Price
- 24 Month Warranty
- Pure Power Inj. Are Evaluated For Eligibility Of Warranty
- BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford F-350 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- Crank Case Vent Filter Kit - 1999-2003 Ford 7.3L
- Crank Case Vent Filter Kit - 1999-2003 Ford 7.3L Power Stroke
- Crank Case Vent Filter
- Product Attributes:
- Category: Crank Case Filter Kit
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1047511
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Reduces crankcase oil vapor that contaminates the intake system
- Prevents deterioration of silicone boots causing them to balloon and blow off
- Installation takes just two hours
- Replacement filter element p/n 1302171
- BD's Crank Case Vent Filter Kit for Ford 6.0L and 7.3L PowerStroke applications reduces crankcase oil vapor that passes through the crankcase vent and contaminates the intake system. Oil Vapor residue reduces turbocharger and intercooler efficiency, and also deteriorates the silicone boots-causing them to balloon and blow off. The Crank Case Vent Filter Kit prevents all of these issues, and includes everything you need for a professional installation, including all hardware and clamps. Installation time takes just two hours.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford F-350 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- Billet Input Shaft Ford 1999-2010 4R100/5R110
- 4R100 / 5R110 Transmission;
- Billet Input Shaft Ford 7.3L/6.0L/6.4L PowerStroke 1999-2010 4R100/5R110
- Billet Input Shaft
- Product Attributes:
- Category: Overhaul Kits & Parts
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1062124-4
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Increase the durability of your transmission
- Increase the durability of your transmission with input, output and intermediate Billet Shafts rated up to 300M and 300 Maraging that are designed to take the shock from high horsepower and heavy loads.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford F-350 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- Exhaust Brake - 1999-2003 Ford 7.3L Air/Turbo Mount
- Turbo Mount; Air activated;
- Exhaust Brake - 1999-2003 Ford 7.3L Air Actuated Turbo Mount
- Exhaust Brake
- Product Attributes:
- Category: Mechanical Exhaust Brakes
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1061830
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- BD's exclusive Variable Orifice Technology
- BD's exclusive alumibronze bushing
- Piston ring-seals
- Stainless steel butterfly shaft
- Proven to stand-up under the harsh, high heat conditions of the exhaust environment
- BD's solid, offset butterfly
- All mounting hardware are made of corrosion resistant stainless steel
- Air compressor included
- There's a reason why the BD Brake is the most widely-recognized diesel exhaust brake in the industry: It's the best! Compare it to the competition, and you'll see why.
- Spring loaded cylinder
- Pressure regulation
- Provides up to 150 retarding horsepower throughout the engine's RPM range
- Rugged, cast-iron housings
- It has been almost 30 years since we started shipping our first exhaust brakes. With that many hill and mountain roads experienced, we used the knowledge gained to continue to deliver the best designed exhaust brake for your application. Incorporating BD's exclusive Variable Orifice Technology, BD's solid, offset butterfly, spring loaded cylinder and pressure regulation provides up to 150 retarding horsepower throughout the engine's RPM range - not just at high rpm like some designs that use holes or additional parts and claim it as a better idea. A range of rugged, cast-iron housings for Dodge, Ford, Chevy and motor home applications that incorporate BD's exclusive alumibronze bushing, piston ring-seals and stainless steel butterfly shaft has proven to stand-up under the harsh, high heat conditions of the exhaust environment. BD's butterfly valve and rotating shaft are made of stainless steel to resist corrosion. An air compressor is included in most kits for newer pick-up trucks.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford F-350 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- ROADMASTER 4R100 TRANSMISSION & CONVERTER FORD 7.3L POWERSTROKE 1999-2003 4WD
- 4wd; Includes torque converter;
- ROADMASTER 4R100 TRANSMISSION & PRO FORCE TORQUE CONVERTER FORD 7.3L POWERSTROKE 1999-2003 4WD
- Transmission 4R100
- Product Attributes:
- Category: Auto Trans & Converter Packages
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1600036
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Stock transmission clutch counts
- Valve body repair shift kit, provides quicker, firmer Shifts
- BD Deep sump Oil pan, increases oil capacity by 6 qt
- BD ProForce converter is fully remanufactured with a new cover, bearings, and clutch frictions and steels
- Increased Line pressure from upgraded PR Valve - Stock 75-150 psi - Upgraded 100-200 psi
- Line pressure modulator valve kit to increase pressures
- On/Off Lockup kit, Converts PWM convertor lockup to On/Off lockup
- Machined center support, Upgraded OD snap ring, and Upgraded Coast Clutch retaining ring
- The Roadmaster 4R100 transmission is our base model transmission for stock and lightly modified trucks looking to increase reliability and longevity. This transmission comes with OEM clutch counts, a remanufactured valve body, and BD's Deep Transmission Pan. Every one of our 4R100 Roadmaster Transmission Packages includes a ProForce Torque Converter.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford F-350 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- BD 7.3L Powerstroke Intercooler Hose & Clamp kit Ford 1999.5-2003
- Withstands Over 100 psi; Stainless Steel T-Bar Clamps;
- BD 7.3L Powerstroke Intercooler Hose & Clamp kit Ford 1999.5-2003 F-250/F-350
- Hose & Clamp Kit
- Product Attributes:
- Category: Hose & Clamp
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1057025
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Each Hose is designed to meet 3x their working pressure
- Utilizing 4, 5 plies of DuPont Nomex / Aramid fiber (no inferior Polyester is used)
- Higher pressure applications have a Red Iron Oxide internal color
- Flurosilicone elastomers and Fluorocarbon withstands oily residues
- Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles
- Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. BD boots can withstand over 100 psi of boost and are secured by rugged, spring-loaded, stainless steel clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford F-350 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- BD Build-It Ford 4R100 Transmission Kit 1999-2003 Stage 4 Master Rebuild Kit 4wd
- 4R100 Stage 4 Master Rebuild Kit; 4wd;
- BD Build-It Ford 4R100 Transmission Kit 1999-2003 7.3L PowerStroke Stage 4 Master Rebuild Kit 4wd
- Build-It Transmission Kit
- Product Attributes:
- Category: Overhaul Kits & Parts
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1061716
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Same parts used in our own performance transmissions
- Intermediate Band
- Intermediate Band Servo Piston
- All kits include the basic rebuild parts and gaskets
- Intermediate Frictions Exedy / Steels
- Intermediate Piston - BD Machined
- Intermediate Sprag
- Lockup Kit - On/Off
- Low Reverse Frictions Borg Warner / Steels
- Output Shaft
- Overdrive Frictions Borg Warner / Steels
- Clutch - Overrun Roller
- Pressure Plate - Low/Rev BD Machined
- Rear Planet
- Rear Ring Gear Hub - BD Machined
- Bearing
- Shift Kit - Tugger
- Snap Ring - Sure Lock
- Steel - BD Machined
- Washer - 1.0 x 0.530 x 0.063 5052 Alum
- Washer - 1.0 x 0.665 x 0.063 5052 Alum
- Bearing Bronze
- Coast Clutch Piston
- Filter
- Overhaul Kit
- Boost Valve
- Boost Valve & Sleeve Kit
- Bushing - 1-Pc Case
- Bypass Tube Eliminator - Front
- Bypass Tube Eliminator - Rear
- Clutch - O/D Roller(Steel)
- Coast Clutch Frictions Raybestos / Steels
- Direct Frictions Borg Warner /S teels
- Forward Frictions Raybestos / Steels
- Friction - Rev/Low - 24 Teeth
- Gear Pump
- Inner Race
- Are you a looking to rebuild your own transmission and needing some specialty parts to match your application? BD offers a range of rebuild parts kits featuring the same parts we use in our own performance transmissions for the seasoned builder to complete the job. All kits include the basic rebuild parts and gaskets and have the added touches that range from stock HP up to our Stage 4 Master Kit - which is pretty well everything we put in our own transmission rebuilds.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- BD TowMaster Ford 4R100 Transmission & Converter Package 1999-2003 4wd
- 4wd; Includes HD Transmission Pan/Filter Kit; Includes multi-disc torque converter;
- BD TowMaster Ford 4R100 Transmission & Converter Package - 1999-2003 4wd
- Transmission 4R100
- Product Attributes:
- Drivetrain: 4wd
- Category: Auto Trans & Converter Packages
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1064044
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- TRANSMISSION:
- Furnace-brazed fins
- Up to triple the amount of lock-up clutch material
- Machined center support
- Reworked front pump
- Fully rollerized geartrain
- Clutch Count: COAST CLUTCH 2
- Clutch Count: FORWARD 5 (25% increase over stock)
- Clutch Count: DIRECT 5
- Clutch Count: LOW REVERSE 7 (17% increase over stock)
- Clutch Count: INTERMEDIATE 4 (33% increase over stock)
- Increase the durability of your drivetrain
- Clutch Count: OVERDRIVE 4 (33% increase over stock)
- BD aluminum HD deep pan, increases oil capacity by 6qt
- Each transmission is dyno tested
- 1990-2003 include auxiliary frame mounted full flow filter kit
- Re-calibrated accumulator body
- Quicker, firmer shifts
- Full shift kit with line mod valve to increase pressures
- Increased pressure to converter
- Added lube circuits to OD planet
- Added lube and support to output and intermediate shafts
- Upgraded OD snap ring
- Drilled and tapped direct and intermediate feeds to prevent leaks at case
- TORQUE CONVERTOR:
- Enhanced Stall - Street/Towing applications
- Torque multiplying cast aluminum stators
- Lower rpm response than the stock converter
- More efficient operation
- Less heat and better fuel economy
- Stamp-forged steel front cover
- When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford F-350 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- Turbo Thruster II Kit - Ford 1999.5-2003 7.3L (Pick-up only/No E-Series) (CARB)
- CARB EO D-553-2; Direct Bolt-In Replacement;
- Turbo Thruster II Kit - Ford 1999.5-2003 7.3L (Pick-up only/No E-Series) (CARB Compliant)
- Turbo Thruster II Kit
- Product Attributes:
- Category: Performance Kits
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1061830
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 State Legal
- Ballistic Billet compressor wheel
- BD's Heavy Duty Waste Gate
- Reduced exhaust temperatures and smoke levels
- No surging
- GTP38 turbochargers are serviceable and come with a new oil resistant intake hose and clamp
- Great fit for off-road, street and highway applications!
- 1050 CFM / 525 HP
- Comp Wheel: 65.9mm 2.59in
- Turbine Wheel: 68mm 2.68in
- 0.84 A/R turbine housing
- BD designed thrust collar and back plate
- BD designed sintered brass 360-degree 6-pad thrust bearing
- Reduced heat build-up and increased bearing durability
- BD's Turbo Thruster II turbo utilizes a custom-designed 360-degree thrust bearing and is mated to a heavy wall backplate to increase durability and reduce heat. Additionally, to improve centrifugal strength at high speed, BD uses a 66 mm Ballistic Billet compressor wheel. To prevent boost creep, BD's exclusive Heavy Duty Waste Gate controls maximum boost pressure while the 0.84 A/R turbine housing reduces exhaust temperatures and smoke levels on acceleration without surging. This unit outperforms the stock turbocharger, improves fuel economy, and is a great fit for all off-road, street, and highway 7.3L Power Stroke applications. Plus, it is C.A.R.B. compliant!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford F-350 Super Duty | V | - | 8 Cyl 7.3L | 445 |
Showing 1 - 10 of 51 products
Loading...