Image
Product
Price
- BD-Built Duramax LMM Injector Stock Reman (0986435520) Chevy/GMC 2007-2010
- Individual injector; LMM;
- BD-Built Duramax LMM Injector Stock Reman (0986435520) Chevy/GMC 6.6L 2007-2010
- Replacement Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Power Level: Stock
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1050322
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Track Bar Bracket Ford F-250/F-350 SuperDuty 4wd 2008-2022
- 4wd; Lowers track bar mounting point by 2-inches;
- BD Track Bar Bracket Ford F-250/F-350 Superduty 4wd 2008-2022 (Gas & Diesel)
- Track Bar Bracket
- Product Attributes:
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1032110
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Ideal for 2-inch or 2.5-inch levelling kits
- Lowers track bar mounting point by 2-inches
- Corrects steering geometry on lifted vehicles
- Improves bump steer in levelled trucks
- High strength cast iron with ADI heat treat process for maximum strength
- Can be combined with BD 1032110/1032111 Track Bars for adjustability or larger lift height
- Common leveling and lift kits pull the trackbar out of position, affecting ride and steering quality, as well as axle position with respect to the body and frame. BD's track bar bracket relocates the pivot point 2-inch down lower down, offsetting the effect of the lift kit by bringing the trackbar assembly down into the factory position and fixing common steering and tracking issues. The BD track bar bracket is designed with high strength, ADI heat-treated cast iron for maximum strength and provides a strong reliable upgrade.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Ford F-350 Super Duty | V | - | 8 Cyl 5.4L | 330 |
- BD TIE ROD KIT CHEVY/GM 2001-2010 1500HD/2500 HD/3500HD Silverado/Sierra
- BD TIE ROD KIT CHEVY/GM 2001-2003 & 2005-2007 1500HD & 2001-2010 2500 HD/3500HD Silverado / Sierra
- Tie Rod Upgrade Kit
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Tie Rod shaft and inner ball joint is 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- The tie rods are 1.5x thicker than OEM for reduced flex and have larger inner ball joints for reduced wear. Testing has shown the BD tie rods can take over double the amount of force than what OEM rods can handle. Greaseable ball joints come with sintered bearings and allow for better load holding and increased life. A better solution compared to the 'band-aide' Tie Rod Sleeves.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - GMC Sierra 2500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD End Links - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- BD End Links (Pair) - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- End Links Set
- Product Attributes:
- Category: Steering
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 1" longer than factory to accommodate upgraded tie rods, and/or leveling kits
- High-strength through bolt design
- OEM style bushing shape for articulation and durability
- Durable Polyurethane bushings
- Installed in approximately 1 hour
- Whether making necessary repairs or upgrades to your steering setup, or running stock to 2" lift or leveling kits, BD's NEW sway bar end links for 2001-2019 Chevy 2500/3500's are your best option to ensure your steering is tight and on the level! Longer, high-strength through bolt design sway bar end links accommodate larger tie rods and leveling kits. Durable polyurethane bushings are designed in the OEM profile to maintain articulation and durability. Leveling kits and lift kits will pull the swaybar out of position, compromising steering geometry. Additionally upgrading tie rods can also cause swaybar interference issues. BD's durable, longer, high-strength, sway bar end links correct sway bar angles and give you the additional clearance you need for those upgraded tie rods. Tighten up the sway bar assembly on your truck and ensure your truck's control is direct and confidence inspiring while avoiding that front end "clunk" that comes with worn out bushings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - GMC Sierra 3500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- STEERING UPGRADE KIT CHEVY/GM DURAMAX 1500HD & 2500HD/3500HD 2001-2010
- Comes with Pitman Arm;
- STEERING UPGRADE KIT - CHEVY/GM DURAMAX 1500HD 2001-2003 & 2005-2007 & 2500 HD/3500HD SILVERADO / SIERRA 2001-2010 WITH PITMAN/IDLER
- Steering Upgrade Kit
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1057937
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Forged I-Beam Centerlink 30% stronger than OEM for less deflection
- Forged Centerlink retains factory geometry for accurate steering
- Tie rods 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- Sway bar end links 1-inch longer than factory to accommodate leveling kits
- Durable polyurethane sway bar end link bushings shaped for articulation and durability
- 1-inch longer Sway bar end links prevent damage to Tie Rod Seals/Boots
- Greaseable pitman arm and idler arm
- Compatible with OEM components
- Other upgrade kit designs change the geometry of the steering which can sacrifice safety and drivability for straight-line strength while pulling or racing. This can also create a dangerous "bump steer" where the vehicle becomes uncontrollable on uneven roads. By not altering the steering geometry, the BD upgrade kit saves you from this problem. The total package is an economic upgrade for worn-out steering and will increase the durability, longevity, and dependability of your truck while saving money by preventing catastrophic repairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chevrolet Silverado 3500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- BD Duramax Flexplate Chevy/GMC 2001-2019
- BD Duramax Flexplate Chevy/GMC 2001-2019 Silverado/Sierra 2500/3500
- Flex Plate
- Product Attributes:
- Category: Flex Plates
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1062224
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Meets SFI 29.3 Approval!
- Direct, bolt-in replacement for the stock unit
- Affordable enough to replace with converter or transmission swap
- Reliably handle up to 1,500 lb.-ft of torque
- Great for racing, towing or stock!
- Twice the material of the stock flex plate
- Forged billet
- Precision-balanced
- Black Oxide coated to resist corrosion and prevents hydrogen embrittlement caused by common zinc plating
- Allows axial thrust unlike solid flywheel conversions
- Fits any OEM or aftermarket torque converter
- BD's FleX-Plate is designed to reliably handle up to 1,500 lb.-ft of torque. These units are forged billet, precision-balanced and SFI approved for use in race application. Black Oxide coated to resist corrosion and prevents hydrogen embrittlement that can cause cracking, these units will fit any OEM or aftermarket torque converter and affordable enough to replace with converter or transmission swap. The BD FleX-Plate is a direct, bolt-in replacement for the stock unit. Great for racing, towing or stock!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- Exhaust Manifold & Up-Pipes Set Powerstroke 6.4L Ford 2008-2010 F-Ser SuperDuty
- Exhaust Manifold and Up-Pipes Set Powerstroke 6.4L - Ford 2008-2010 F-250/F-350/F-450/F-550 SuperDuty
- Exhaust Manifold & Uppipes Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.4l Powerstroke 08-10
- Suggested Product: 1036610
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Internally shielded stainless steel expansion bellows
- 304 Stainless Steel mandrel bent feed pipes
- Ports are gasket matched to maximize exhaust flow
- High temperature black paint
- High-silicon ductile cast iron
- Pre-drilled for pyrometer probes and pressure gauges
- Comes with pipe to exhaust manifold gaskets, EGR gasket, turbocharger pipe gaskets, cylinder head to exhaust manifold gaskets, and, 6 exhaust studs (mates to up-pipe flange)
- Fully EGR compatible - Meets emission requirements
- 6.4L Power Stroke OE exhaust issues are not an 'if' but a 'when'. Prevent these issues with BD's stronger Exhaust Manifold & Up-Pipe Kit. Factory up-pipes are prone to failure due to age and heat cycling causing leaking exhaust, slower turbo spool, as well as additional exhaust noise and soot buildup. BD's larger diameter 304 stainless steel mandrel bent up-pipes with internally shielded expansion bellows, are designed to minimize restriction to the turbo. The BD Up-Pipes are a durable, longer-life replacement for the common Power Stoke problems as well as the perfect complimentary upgrade when replacing a turbo, manifolds, or other engine or transmission repairs. The 6.4L exhaust manifold set is crafted with a heavy duty 0.25" thick-walled Hi-Silicon ductile casting, this makes these manifolds thicker to combat cracking due to high exhaust temperatures. BD's exhaust manifold set is the perfect replacement for reliability, performance and peace of mind.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Ford F-350 Super Duty | V | - | 8 Cyl 6.4L | 391 |
- X-Flow Air Intake Heater Kit - Dodge 2008-2018 6.7L Cummins
- For Use with X Intake Elbows;
- X-Flow Air Intake Heater Kit - Dodge/RAM 2008-2018 6.7L Cummins
- X-Flow Air Intake Heater Kit
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041561
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Heater for BD Intake Horns (p/n 1041560 / 1041561 / 1041566) when installed with Intake Open Grid (p/n 1041562 / 1041564)
- Aids cool and cold weather starting
- Connects to stock grid heater wire
- When installing he X-Flow Intake and Open Grid Plate in a Cummins, the factory grid heater is removed. By adding the BD X-Flow Air Intake Heater Kit to your X-Flow Intake you can take advantage of quicker, cleaner cold starts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Dodge Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 0.91AR Dodge 2007.5-2018
- S364SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Wheel Size: S364sxe/80 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 64.5mm 2.54in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 82 Lb./min
- Approximate rated 600hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Dodge Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S366SXE/80 0.91AR Dodge 2007.5-2018
- S366SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S366SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Wheel Size: S366sxe/80 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 66mm 2.60in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 87 Lb./min
- Approximate rated 650hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Dodge Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 223 products
Loading...