Image
Product
Price
- BD Cummins Killer Frost Plug Plate - Dodge/RAM 2003-2018 5.9L/6.7L
- BD Cummins Killer Frost Plug Plate - Dodge/RAM 2003-2018 5.9L/6.7L Cummins
- Killer Frost Plug Plate
- Product Attributes:
- Category: Killer Frost Plug Plate
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050333
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Works with the frost plug in place, blown out, or leaking
- No need to punch the old frost plug out
- Utilizes one large #333 O-ring
- Works with and without a TCC crossover tube
- Five flanged head bolts to keep the coolant contained
- 6.7L require the bellhousing support bracket to be removed
- Perfect time to install one is when the transmission is removed!
- The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- X-Flow Air Intake Heater Kit - Dodge 2008-2018 6.7L Cummins
- For Use with X Intake Elbows;
- X-Flow Air Intake Heater Kit - Dodge/RAM 2008-2018 6.7L Cummins
- X-Flow Air Intake Heater Kit
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041561
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Heater for BD Intake Horns (p/n 1041560 / 1041561 / 1041566) when installed with Intake Open Grid (p/n 1041562 / 1041564)
- Aids cool and cold weather starting
- Connects to stock grid heater wire
- When installing he X-Flow Intake and Open Grid Plate in a Cummins, the factory grid heater is removed. By adding the BD X-Flow Air Intake Heater Kit to your X-Flow Intake you can take advantage of quicker, cleaner cold starts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins Open Grid X-Intake Dodge 2007.5-2018 2500/3500
- Eliminates Cold Weather Intake Air Heater;
- BD 6.7L Cummins Open Grid X-Intake Dodge/RAM 2007.5-2018 2500/3500
- X-Intake Air Grid
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041563
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Eliminates restrictive stock cold weather intake air heater grid
- 35% larger opening cools EGT's and improves turbo response
- For cold weather operation, optional Intake Heater available for use with BD 6.7L X-Flow Intake horns
- Bolt the X-Flow Intake Elbow to our 6.7L Intake Open Grid for additional flow and performance! By removing the grid heating element, the Open Grid Plate increases the opening by 35%, eliminating the restrictive bottle neck found in the factory intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/80 0.91AR Dodge 2007.5-2018
- S363SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1064264
- Wheel Size: S363sxe/80 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S369SXE/80 1.00AR Dodge 2007.5-2018
- S369SXE/80 1.00AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S369SXE/80 1.00AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1064264
- Wheel Size: S369sxe/80 1.00 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 69.00mm 2.72in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 1.00
- Flow: 98 Lb./min
- Approximate rated 700hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins T4 Exhaust Manifold Dodge 2007.5-2018 2500/3500 Pick-up
- For T4 mount turbo;
- BD 6.7L Cummins T4 Exhaust Manifold Dodge/RAM 2007.5-2018 2500/3500 Pick-up
- Exhaust Manifold
- Product Attributes:
- Turbo Mount Flange: T4
- Pick-up or Cab&Chassis: Pick-up
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Larger porting design than others maximizes T4 turbocharger's potential power
- Fully divided pulse manifold design
- 6.7L performance replacement manifold for use T4 mount turbochargers (S300,S400,etc.)
- Fully divided pulse manifold design, allows for quicker turbo response
- Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
- Thick walled casting and integral slip joint prevents cracking and exhaust leaks
- Experience quick spool times and low drive pressures with an overall increase in performance
- Fully EGR compatible
- Gaskets set with EGR port, exhaust port and turbo mount gaskets available separately - P/N 1045992-T4
- Replacement manifolds with larger T4 and T6 flanges for changing out the stock turbo. The turbo stays in same stock location. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Great for performance trucks wanting to increase airflow. Designed using modern technology utilizes pulse flow for quicker turbo spool and increased power. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Gasket Set, Exhaust Manifold T4 Mount - Dodge 1998.5-2018 5.9L/6.7L
- T4 Turbo Mount Flange;
- Gasket Set, Exhaust Manifold T4 Mount - Dodge/RAM 1998.5-2018 5.9L/6.7L
- Manifold Gasket Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Exhaust Manifold Gasket Kit for T4 mount 1045995-T4 / 1045996-T4 manifolds
- Exhaust Manifold Gasket Kit includes six cylinder and T4 turbo mount gaskets.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins Turbo Stock Replacement Dodge 2007.5-2012 Pick-up HE351
- The Speed Sensor typically is not needed to be replaced during remove and reinstall, and, is not included with this turbo;
- BD 6.7L Cummins Turbo Stock Replacement Dodge/RAM 2007.5-2012 Pick-up HE351
- Reman HE351 Turbo
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 07.5-12
- Suggested Product: 1045965
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- VSR high speed balanced
- Comes with actuator and gaskets
- Each actuator is calibrated and tested prior to shipping
- Specializing in remanufacturing turbos, BD offers units for Dodge, Ford, Chevy, Caterpillar, Detroit, Cummins, Komatsu, Toyota, automotive, light duty pick-up, agriculture, marine, commercial, industrial, gas and diesel applications. Quality exchange OEM turbochargers remanufactured in our shop, staffed with experienced industry-leading personnel. Fully equipped with manual and CNC lathes, high speed VSR precision balancer, precision grinders, measuring instruments, pressure blasters and wheelabrators.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge 1998.5-2018
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge/RAM 1998.5-2018
- Exhaust Manifold Bolt Kit
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Grade 10.9 Hardware meets a balance of high strength and high toughness
- Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield
- Black Oxide coating matches BD manifolds
- Non-Zinc-plated fasteners prevent zinc embrittlement
- Qty 12 Flange Head exhaust bolts (M10x1.5 - 60mm 10.9)
- Qty 12 Black Oxide exhaust spacers
- Qty 2 Stainless Steel Socket Bolts (M10x1.5 - 35mm)
- Qty 2 Stainless Steel M10 Washer
- Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD's class 10.9 bolts and black oxide spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Injector Line Set Dodge Dodge/RAM 6.7L Cummins 2007.5-2018
- BD Injector Line Set Dodge Dodge/RAM 6.7L Cummins 2007.5-2018 2500/3500/4500/5500
- Injector Line Set
- Product Attributes:
- Category: Lift Pumps & Fuel Supply
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050551
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- OEM quality
- Corrosion resistant
- Exact fit (no adjustment needed by end user)
- Preformed to the correct factory specifications
- Stock replacement fuel injector feed lines for Cummins 6.7L Common Rail engines. Replaces OE Part #: 68005438AA(x2), 68005435AA, 68005437AA, 68005336AA(x2). Replaces Cummins Part #: 4935974 (x2), 4935976, 4935981, 4935982 (x2).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 128 products
Loading...