Image
Product
Price
- BD E-PAS Positive Air Shut-Off 6.7L Cummins Dodge 2019-2024 Pick-up/Cab-Chassis
- Plug-In Install;
- BD E-PAS Positive Air Shut-Off 6.7L Cummins - Dodge 2019-2024 Pick-up / Cab-Chassis
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Easily removed for truck lease returns
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Does not set ECM Trouble codes
- Automatically resets after shut down
- Only the switch needs a tool to install
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- EXHAUST MANIFOLD KIT FORD ECOBOOST 2017-2020 3.5L
- EXHAUST MANIFOLD KIT FORD F-150 3.5L ECOBOOST 2017-2020
- Exhaust Manifold Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: Gasoline
- Suggested Product: 1061718
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Uniform wall thickness casting
- Extended studs and spacers (15mm Longer)
- Two (2) additional mounting holes per manifold
- 16% increase in flow capability
- Gaskets and hardware included
- Receive performance and durability with our enhanced Ford 3.5L EcoBoost exhaust manifolds, specifically designed for the 2017-2020 model years. Our BD upgraded manifolds address common exhaust manifold bolt failures by incorporating two additional bolt holes and by utilizing extended fasteners and spacers to better withstand thermal expansion. In addition, we've engineered them to flow 16% better than the OEM to increase efficiency. Crafted with precision, our BD Manifolds boast a robust, thicker design. They are constructed from high-silicon ductile iron to combat warping, ensuring your vehicle remains at peak performance for the long haul.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Lincoln Navigator | V | 3496 | 6 Cyl 3.5L | 213 |
- Screamer Turbo Chevy/GM 6.6L L5P Duramax 2017-2024
- Screamer Turbo Chevy/GM 6.6L L5P Duramax 2017-2024 Silverado/Sierra 2500/3500
- Screamer L5P Turbo
- Product Attributes:
- Category: Single Turbo Performance
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1061825
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Increased airflow - up to 80lb/min
- Larger 66.2mm billet compressor wheel
- Larger 67mm turbine wheel
- Reduced EGTs at increased power output
- Stock appearing drop in turbo, will work with stock emissions equipment
- Up to 680hp with supporting modifications
- Includes intake horn
- BD's Screamer line of turbos offer drop-in, stock-appearing units that add an additional punch in power without major modifications to intake or exhaust systems. The L5P Screamer for 2017-up Duramax engines feature custom compressor and turbine wheels that have been designed to give you increased airflow without compromising on low end performance. Manufactured using OEM housings, the L5P Screamer turbo is machined to accept the new larger 66.2mm compressor and 67mm turbine wheels which will allow for better airflow (up to 80 lb./min) and lower exhaust gas temperatures. This turbo works best on trucks with supporting modifications such as custom tuning to maximize efficiency. With supporting modifications, the L5P Screamer can achieve up to 680hp.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Chevrolet Silverado 3500 HD | V | 6571 | 8 Cyl 6.6L | 401 |
- Turbo Mounting Kit HE300 RAM 6.7L Cummins 2019-up
- Turbo Mounting Kit HE300 RAM 6.7L Cummins 2019-2022
- Turbo Install Hardware
- Product Attributes:
- Category: Components
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1045999
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- OE quality components
- Complete kit, no additional parts required
- This kit has all the necessary hardware for your stock or performance HE300 turbo install to help prevent leaks and to replace older studs that are prone to future breakage. Kits includes gaskets, studs and required hardware.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Screamer 6.7L Cummins Turbo RAM 2019-2022 Pick-up HE300VG
- CARB EO D-553-14
- BD Screamer 6.7L Cummins Turbo RAM 2019-2022 2500/3500 Pick-up HE300VG
- Screamer Turbo
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 50-STATE LEGAL!
- Enables quicker turbo response
- Replaces OEM Parts: 5456364, 5456365, 68444771AA, 68444771AB, 5498271RX, 5554227
- Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
- The QST Turbine wheel has a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
- QST turbine Blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
- Each actuator is calibrated and tested prior to shipping
- VSR high speed balanced
- CARB EO No. D-553-14
- Allows for higher turbine gas flow & increased efficiency
- Can support modifications up to 690 HP
- Drops into the stock location
- Includes BD's HE300 Turbo Mounting Kit (PN: 1045999) with all the necessary hardware for your turbo install
- A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with performance modifications. No extra parts to install, just drop-in and enjoy the extra power potential.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- DURAMAX L5P REMAN TURBO CHEVROLET/GMC 2500/3500 2020-2023
- DURAMAX L5P Reman Turbo Chevy/GMC 2500/3500 2020-2023
- Exchange Turbo L5P
- Product Attributes:
- Category: Stock Replacement
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1050458
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Actuator is pre-calibrated and ready to install
- Upgraded oversized journal bearings for increased longevity
- VSR High Speed Balanced
- This remanufactured turbo is fully cleaned and inspected before having all the seals, piston rings, journal bearings, and mounting hardware replaced. It is high-speed balanced and the actuator is fully tested and calibrated before shipping.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- Water In Fuel Sensor Kit Dodge/RAM 6.7L Cummins 2007-2022
- Water In Fuel Sensor Kit Dodge/RAM 6.7L Cummins 2007-2022 2500/3500
- Water In Fuel Sensor/Filter Kit
- Product Attributes:
- Category: Lift Pumps & Fuel Supply
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1050071
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Dodge Factory WIF Warning light option
- Prevents fuel system damage
- Factory sealed plug connections
- Shielded wire harness included
- The water-in-fuel (WIF) sensor kit allows installation of a new WIF sensor into the bottom of the new water separator filter and includes a wiring harness to connect it to the vehicles original WIF sensor wiring. Once installed, the WIF warning in the instrument cluster will be functional using the new sensor.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Track Bar Bracket Ford F-250/F-350 SuperDuty 4wd 2008-2022
- 4wd; Lowers track bar mounting point by 2-inches;
- BD Track Bar Bracket Ford F-250/F-350 Superduty 4wd 2008-2022 (Gas & Diesel)
- Track Bar Bracket
- Product Attributes:
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1032110
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Ideal for 2-inch or 2.5-inch levelling kits
- Lowers track bar mounting point by 2-inches
- Corrects steering geometry on lifted vehicles
- Improves bump steer in levelled trucks
- High strength cast iron with ADI heat treat process for maximum strength
- Can be combined with BD 1032110/1032111 Track Bars for adjustability or larger lift height
- Common leveling and lift kits pull the trackbar out of position, affecting ride and steering quality, as well as axle position with respect to the body and frame. BD's track bar bracket relocates the pivot point 2-inch down lower down, offsetting the effect of the lift kit by bringing the trackbar assembly down into the factory position and fixing common steering and tracking issues. The BD track bar bracket is designed with high strength, ADI heat-treated cast iron for maximum strength and provides a strong reliable upgrade.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Ford F-350 Super Duty | V | 7292 | 8 Cyl 7.3L | 445 |
- BD Protect68 Gasket Plate Kit Dodge 6.7L 2019-2024 68RFE Transmission
- BD Protect68 Gasket and Separator Plate Kit Dodge 6.7L 2019-2022 68RFE Transmission
- Protect68 Gasket Plate Kit
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1071220x
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Ideal for use with EFI Live, HP Tuners or other transmission pressure tuning
- Recommended full throttle max line pressure 225-250psi
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Exclusive BD separator plate gaskets eliminate cross leaks and eliminate P0871 codes
- Heavy duty accumulator plate to prevent accumulator blowout
- Kit includes pan gasket, 3 doughnut seals and check ball
- This kit requires custom transmission tuning or an additional module to command higher line pressure
- Industry leading custom bonded gasket valve body separator plate substantially reduces cross leaks compared to stock and other aftermarket kits, even with much higher line pressures - up to 250psi. Kit includes a heavy duty accumulator plate to prevent accumulator blow-out. Ideal for use with EFI Live, HP Tuners, and other transmission pressure tuning.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD E-PAS Positive Air Shut-Off - Chevy/GM 6.6L Duramax L5P 2017-2024
- L5P engine;
- BD E-PAS Positive Air Shut-Off - Chevy/GM 6.6L Duramax L5P 2017-2024 2500HD / 3500HD & 2019-2023 4500HD / 5500HD / 6500HD
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1057937
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Automatically resets after shut down
- Only the switch needs a tool to install
- Easily removed for truck lease returns
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Chevrolet Silverado 3500 HD | V | 6571 | 8 Cyl 6.6L | 401 |
Showing 1 - 10 of 87 products
Loading...