1995 ICON Vehicle Dynamics Parts
Image
Product
Price
- with 0" - 3" Lift Kit
- 1991-1997 LAND CRUISER 80 0-3" LIFT FRONT 2.0 VS INTERNAL RESERVOIR SHOCK
- 91-97 LAND CRUISER 80 0-3" FRONT 2.0 VS IR
- Product Attributes:
- AAP_UDA_12: Ea
- Dust Shield: No
- AAP_UDA_22: 1
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Finish: Anodized
- AAP_UDA_4: 55
- Boot Included: No
- Lower Mount Type: Stem
- Shock Absorber Rod End Measuring Point: Shoulder Of Stem
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Toyota Land Cruiser | Front |
- These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
- TOYOTA REAR 8.0" U-BOLT KIT
- Product Attributes:
- AAP_UDA_12: Ea
- Bolt Grade: 5
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Nuts Included: Yes
- Grade Type: Performance
- Material: Steel
- California Prop 65 Warning: Yes
- Finish: E-coat
-
Features:
- Measures 8 inches in length
- E-Coated for corrosion resistance
- Includes installation hardware
- For one axle
- These ICON U-bolts are a square design made from high-strength steel and E-Coated for corrosion resistance. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1995 - Toyota Tacoma | Rear | Base | 4WD |
- Used with 0" to 1.5" Lift Except 5 Lug Models
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 96-04 TACOMA 4WD 0-1.5" REAR 2.0 VS NR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: No
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 1.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Toyota Tacoma | Rear |
- Use Up To 33 (in) x 11.50 (in) Tires Requires Removal of OE Leaf Spring Overload Leaves Raises Rear 1.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- The ICON Add-A-Leaf kit is a great way to lift the rear of your 96-23 Tacoma or 00-06 Tundra while also improving rear end ride quality. Simply remove the factory overload spring, bolt up the kit, and say goodbye to that rough factory ride.
- 96-23 TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Helper Spring: No
- Leaf Width: 2.5
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Quantity: 3
- U Bolts Included: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 1.5
- Axle Modification Needed: No
- Suspension Grade Type: Performance
- Axle Orientation: Rear
- Material: Steel
-
Features:
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- The ICON Vehicle Dynamics Progressive Add-A-Leaf kit is a great way to lift the rear of your 1996-2023 Toyota Tacoma or 2000-2006 Toyota Tundra while also improving rear end ride quality. Installing in place of the factory overload leaves, this kit effectively lowers the rear spring rate by approximately 10% for a more compliant ride. This three-leaf progressive rate Add-A-Leaf Kit comes complete with U-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1995 - Toyota Tacoma | Rear | SR5 | 4WD |
- Used with 0 (in) to 1.5 (in) Lift
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved performance. These shocks feature remote reservoirs, are vehicle specific, 100% rebuildable/revalveable.
- 96-04 TACOMA 4WD 0-1.5" REAR 2.0 VS RR
- Product Attributes:
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Dust Boot Included: No
- External Reservoir: Yes
- Remote Reservoir: Yes
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 1.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1995 - Toyota Tacoma | Rear | 4WD |
- Except 5 Lug Models
- These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
- TOYOTA REAR 8.0" U-BOLT KIT
- Product Attributes:
- AAP_UDA_12: Ea
- Bolt Grade: 5
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Nuts Included: Yes
- Grade Type: Performance
- Material: Steel
- California Prop 65 Warning: Yes
- Finish: E-coat
-
Features:
- Measures 8 inches in length
- E-Coated for corrosion resistance
- Includes installation hardware
- For one axle
- These ICON U-bolts are a square design made from high-strength steel and E-Coated for corrosion resistance. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Toyota Tacoma | Rear |
- Used with 0 (in) to 1.5 (in) Lift
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 96-04 TACOMA 4WD 0-1.5" REAR 2.0 VS NR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: No
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 1.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1995 - Toyota Tacoma | Rear | 4WD |
- 0 (in) - 3 (in) Lift
- 1996-2004 TACOMA/1996-2002 4RUNNER 2.5 VS IR COILOVER KIT
- 96-04 TACOMA/96-02 4RUNNER 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable ride height from 0" - 3
- Race shock piston with flutter stack compression valving
- Cad-plated threaded body
- Billet aluminum upper mount
- 5/8" PTFE-lined spherical bearings
- Completely re-buildable
- 2.5" shock diameter to prevent overheating
- Chrome-silicon spring
- 250 PSI nitrogen-charged internal reservoir
- These adjustable coil-over shocks have proven their strength and longevity for years on end and they keep going. These shocks offer the best ride quality and handling. They increase suspension travel and dramatically increase the capabilities of your Tacoma or 4Runner's front suspension. These are a Race-Proven shock designed for the daily driver and the avid off-roader all in one!
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1995 - Toyota Tacoma | Front | 4WD |
- Used with 0" to 1.5" Lift Except 5 Lug Models
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved performance. These shocks feature remote reservoirs, are vehicle specific, 100% rebuildable/revalveable.
- 96-04 TACOMA 4WD 0-1.5" REAR 2.0 VS RR
- Product Attributes:
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Dust Boot Included: No
- External Reservoir: Yes
- Remote Reservoir: Yes
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 1.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Toyota Tacoma | Rear |
- 91-97 LAND CRUISER 80/100 4-6" REAR 2.0 VS IR
- with 4" - 6" Lift Kit
- 1991-2007 LAND CRUISER 80/100 4-6" REAR 2.0 VS INTERNAL RESERVOIR SHOCK
- 91-07 LAND CRUISER 80/100 4-6" REAR 2.0 VS IR
- Product Attributes:
- AAP_UDA_12: Ea
- Dust Shield: No
- AAP_UDA_22: 1
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Finish: Anodized
- AAP_UDA_4: 55
- Boot Included: Yes
- Lower Mount Type: Eyelet
- Attributed Description: Icon Vehicle Dynamics; Shock Absorber; Adjustable: No; Boot Included: Yes; Coil Over Springs Included: No; Dust Shield: No; Gas Charged: Yes; Lower Mount Type: Eyelet; Shock Absorber Body End Measuring Point: Shoulder Of Stem; Shock Absorber Rod End Measu
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Toyota Land Cruiser | Rear |
Showing 1 - 10 of 24 products
Loading...