Image
Product
Price
- These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
- TOYOTA REAR 8.0" U-BOLT KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Nuts Included: Yes
- Grade Type: Performance
- Length: 8
- Title: Toyota Rear 8.0" U-bolt Kit
-
Features:
- Measures 8 inches in length
- Includes installation hardware
- For one axle
- These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1996 - Toyota Tacoma | Rear | DLX | 4WD |
- 93-97 LAND CRUISER BRAKE LINE KIT +3
- 2008-UP LAND CRUISER 200 SERIES 1.75" LIFT DUAL RATE REAR SPRING KIT
- 93-97 LAND CRUISER BRAKE LINE KIT 3"
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Outer Sheathing Material: Yes
- Title: 93-97 Land Cruiser Brake Line Kit +3"
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota Land Cruiser | Front and Rear |
- Rear Raise Height 1.5 (in) Raises Front 0 (in) - 3 (in)
- 1995.5-2004 TACOMA 0-3" LIFT STAGE 2 SUSPENSION SYSTEM
- 95.5-04 TACOMA 0-3" STAGE 2 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 95.5-04 Tacoma 0-3" Stage 2 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" hardened chrome shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear Emulsion shock with 5/8" polished chrome plated steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 2 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 96-04 Toyota Tacoma 4WD/PreRunner Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1996 - Toyota Tacoma | Front and Rear | 4WD |
- Rear Raise Height 1.5 (in) Raises Front 0 (in) - 3 (in)
- 1995.5-2004 TACOMA 0-3" LIFT STAGE 5 SUSPENSION SYSTEM WITH TUBULAR UCA
- 95.5-04 TACOMA 0-3" STAGE 5 SUSPENSION SYSTEM W TUBULAR UCA
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 95.5-04 Tacoma 0-3" Stage 5 Suspension System W Tubular Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable extended travel remote reservoir coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear remote reservoir shock with 5/8" polished nitro steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1996 - Toyota Tacoma | Front and Rear | 4WD |
- Use Up To 33 (in) x 11.50 (in) Tires Front Raise Height 3 (in) Rear Raise Height 3 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.63” Backspace Lift heights based around a typical 80 Series build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle.
- 1991-1997 TOYOTA LAND CRUISER 80 SERIES 3" LIFT STAGE 1 SUSPENSION SYSTEM
- 91-97 LAND CRUISER 80 SERIES 3" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels: 17x8.5" W/ 4.63” Backspace
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 91-97 Land Cruiser 80 Series 3" Stage 1 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 3” lift height
- Approximately 40% increased front wheel travel over stock
- Approximately 35% increased rear wheel travel over stock
- ICON-engineered dual rate coil springs provide exceptional on-road ride quality and outstanding off-road performance
- Vehicle specific tuned 2.0 Aluminum Series front and rear shocks offer superior shock damping and control
- 2.0 aluminum body IFP shocks with 5/8" shaft
- Corrosion resistant anodized aluminum shock body
- 6061 aircraft grade aluminum CNC machined components
- 100% bolt-on design means no drilling, cutting or welding necessary for install
- After an in-depth R&D process, ICON engineers have developed a 3” suspension system for the 80 Series that is aimed to improve on-road handling characteristics while also maximizing the Land Cruiser’s off-road potential. This Stage 1 system includes ICON-designed dual rate coil springs, caster correction bushings, sway bar relocation components, all bracketry and hardware required for install, and ICON Vehicle Dynamics 2.0 Aluminum Series shocks that feature a vehicle specific valving for optimized ride quality and balanced damping front to rear. This ICON Stage 1 System is the perfect entry level suspension system for drivers seeking a quality on-road ride with exceptional off-road characteristics as well.
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 1996 - Toyota Land Cruiser | Front and Rear | GAS |
- 0" - 3" Lift
- 1996-2002 TOYOTA 4RUNNER 0-3" LIFT STAGE 1 SUSPENSION SYSTEM
- 96-02 4RUNNER 0-3" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 96-02 4runner 0-3" Stage 1 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- Decreased body roll
- Vehicle-specific tuned front and rear shocks provide superior damping and control
- Coilovers are adjustable from 0-3" of lift height
- Shocks are fully rebuildable and revalveable
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- FK Rod End bearings for extended longevity and minimal deflection
- CNC machined 6061 aircraft-grade aluminum components
- Bolt-on design makes for straightforward install
- The 1996-2002 Toyota 4Runner was an excellent vehicle off the showroom floor over a decade ago, and Toyota’s reputation for reliability and performance continues to draw the attention of both hardcore off-road enthusiasts and newcomers to the “3rd Gen” platform to this day. ICON engineers have assessed the 3rd Gen 4Runner front to back and developed components that work together to extract maximum performance out of the vehicle. With the ICON Stage 1 suspension system on and off-road performance is significantly improved with 2.5 VS Series coilovers and 2.0 Aluminum Series rear shocks. These components feature ICON engineered coil springs, vehicle-specific shock valving, FK Rod End bearings, and high-quality CNC-machined components for superior damping and control. Fully serviceable shock absorbers mean that these components can be rebuilt or re-valved as necessary, providing a long service life and the ability to customize the ride quality for unique vehicle setups. The 2.5 VS Series coilovers are height adjustable from 0-3” of lift, allowing the use of larger, more aggressive wheel and tire combinations. ICON Vehicle Dynamics' 1996-2002 4Runner Stage 1 suspension system is an excellent choice for those drivers looking to enhance the handling characteristics of their 3rd Gen on the road while increasing overall performance in the dirt.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota 4Runner | Front and Rear |
- Use Up To 33 (in) x 11.50 (in) Tires Front Raise Height 3 (in) Rear Raise Height 3 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.63” Backspace Lift heights based around a typical 80 Series build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle.
- 1991-1997 TOYOTA LAND CRUISER 80 SERIES 3" LIFT STAGE 2 SUSPENSION SYSTEM
- 91-97 LAND CRUISER 80 SERIES 3" STAGE 2 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels: 17x8.5" W/ 4.63” Backspace
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 91-97 Land Cruiser 80 Series 3" Stage 2 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 3” lift height
- Approximately 40% increased front wheel travel over stock
- Approximately 35% increased rear wheel travel over stock
- ICON-engineered dual rate coil springs provide exceptional on-road ride quality and outstanding off-road performance
- Vehicle specific tuned 2.5 Series front and rear shocks offer superior shock damping and control
- 2.5 body remote reservoir shocks with 7/8" shafts
- 2.5 Aluminum Series front and rear shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
- 6061 aircraft grade aluminum CNC machined components
- 100% bolt-on design means no drilling, cutting or welding necessary for install
- After an in-depth R&D process, ICON engineers have developed a 3” suspension system for the 80 Series that is aimed to improve on-road handling characteristics while also maximizing the Land Cruiser’s off-road potential. This Stage 2 system includes ICON-designed dual rate coil springs, caster correction bushings, sway bar relocation components, all bracketry and hardware required for install, and ICON Vehicle Dynamics 2.5 Aluminum Series remote reservoir shocks that feature a vehicle specific valving for optimized ride quality and balanced damping front to rear. The 2.5" remote reservoir shocks front and rear ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during extended off-road use. This ICON Stage 2 System is the perfect suspension system for drivers seeking a quality on-road ride with outstanding off-road performance under extreme use.
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 1996 - Toyota Land Cruiser | Front and Rear | GAS |
- Use Up To 33 (in) x 11.50 (in) Tires Front Raise Height 3 (in) Rear Raise Height 3 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.63” Backspace Lift heights based around a typical 80 Series build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle.
- 1991-1997 TOYOTA LAND CRUISER 80 SERIES 3" LIFT STAGE 3 SUSPENSION SYSTEM
- 91-97 LAND CRUISER 80 SERIES 3" STAGE 3 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels: 17x8.5" W/ 4.63” Backspace
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: Yes
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 91-97 Land Cruiser 80 Series 3" Stage 3 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 3” lift height
- Approximately 40% increased front wheel travel over stock
- Approximately 35% increased rear wheel travel over stock
- ICON-engineered dual rate coil springs provide exceptional on-road ride quality and outstanding off-road performance
- Vehicle specific tuned 2.5 Series front and rear shocks offer superior shock damping and control
- 2.5 body remote reservoir shocks with 7/8" shafts
- 2.5 Aluminum Series shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
- 6061 aircraft grade aluminum CNC machined components
- ICON CDC Valve allows quick and easy end-user compression adjustability
- 100% bolt-on design means no drilling, cutting or welding necessary for install
- After an in-depth R&D process, ICON engineers have developed a 3” suspension system for the 80 Series that is aimed to improve on-road handling characteristics while also maximizing the Land Cruiser’s off-road potential. This Stage 3 system includes ICON-designed dual rate coil springs, caster correction bushings, sway bar relocation components, all bracketry and hardware required for install, and ICON Vehicle Dynamics 2.5 Aluminum Series remote reservoir shocks that feature a vehicle specific valving for optimized ride quality and balanced damping front to rear. The 2.5" remote reservoir shocks front and rear ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during extended off-road use. The Stage 3 system outfits the 80 Series Land Cruiser with ICON 2.5 Aluminum Series shocks that feature CDCV, or Compression Damping Control Valve. This technology allows end-users to quickly adjust the ride quality of their shocks with the simple turn of a knob – no tools required! With ten high-resolution settings to choose from, the ICON CDC Valve will allow for the perfect ride quality across any terrain. This ICON Stage 3 System is the perfect suspension system for drivers seeking a quality on-road ride with outstanding off-road performance under extreme use, and the ability to fine tune the vehicle's performance for any conditions encountered.
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 1996 - Toyota Land Cruiser | Front and Rear | GAS |
- 0" - 3" Lift
- 1996-2002 TOYOTA 4RUNNER 0-3" LIFT STAGE 2 SUSPENSION SYSTEM
- 96-02 4RUNNER 0-3" STAGE 2 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 96-02 4runner 0-3" Stage 2 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- CNC machined 6061 aircraft-grade aluminum components
- Tubular steel upper control arms feature ICON Delta Joints
- Bolt-on design makes for straightforward install
- Decreased body roll
- Vehicle-specific tuned front and rear shocks provide superior damping and control
- Coilovers are adjustable from 0-3" of lift height
- ICON engineered rear coils provide 1" of lift and improved performance
- Shocks are fully rebuildable and revalveable
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- FK Rod End bearings for extended longevity and minimal deflection
- This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Toyota 4Runner | Front and Rear |
- Rear Raise Height 1.5 (in) Raises Front 0 (in) - 3 (in)
- 1995.5-20004 TACOMA 0-3" LIFT STAGE 4 SUSPENSION SYSTEM WITH TUBULAR UCA
- 95.5-04 TACOMA 0-3" STAGE 4 SUSPENSION SYSTEM W TUBULAR UCA
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 95.5-04 Tacoma 0-3" Stage 4 Suspension System W Tubular Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable extended travel remote reservoir coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear remote reservoir shock with 5/8" polished nitro steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1996 - Toyota Tacoma | Front and Rear | 4WD |
Showing 1 - 10 of 51 products
Loading...