Image
Product
Price
- with 3 (in) Maximum Lift Rear
- ICON 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
- 99-24 FSD 0-3" REAR 2.5 VS IR PAIR
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Cylinder Color: Gray
- Grade Type: Performance
- Mounting Hardware Included: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Bore Diameter: 2.25
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257340 - 7/8 Shaft 14.25 Oal, 10.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Cylinder Diameter: 2.5
- External Reservoir: No
-
Features:
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- Nitrogen charged monotube design with internal reservoir
- Increase in strength and heat dissipation when compared to ICON V.S. 2.0 Series shocks
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 6061 aircraft grade aluminum CNC machined components
- PTFE lined spherical bearings and application specific mounting hardware
- 7/8” diameter induction hardened, chrome plated shock shaft
- 100% Rebuildable
- 100% Revalveable
- ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. The larger diameter and oil volume of ICON 2.5 IR Series shocks provide better ride quality and heat dissipation properties than the standard 2.0 Aluminum Series IR Shocks. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDC Valve) shocks.
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1999 - Ford F-350 Super Duty | Rear | Extended Cab Pickup |
- Raises Front 0 (in) - 3 (in)
- 1995.5-2004 TACOMA 0-3" LIFT STAGE 1 SUSPENSION SYSTEM
- 95.5-04 TACOMA 0-3" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys - 20x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- California Prop 65 Warning: Yes
- Maximum Lift: 3
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" hardened chrome shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear Emulsion shock with 5/8" polished chrome plated steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 1 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics '96-'04 Toyota Tacoma 4WD/PreRunner Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1999 - Toyota Tacoma | Front and Rear | 4WD |
- Rear Raise Height 1.5 (in) Raises Front 0 (in) - 3 (in)
- 1995.5-2004 TACOMA 0-3" LIFT STAGE 2 SUSPENSION SYSTEM
- 95.5-04 TACOMA 0-3" STAGE 2 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys - 20x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- California Prop 65 Warning: Yes
- Maximum Lift: 3
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" hardened chrome shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear Emulsion shock with 5/8" polished chrome plated steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 2 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 96-04 Toyota Tacoma 4WD/PreRunner Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1999 - Toyota Tacoma | Front and Rear | 4WD |
- Rear Raise Height 1.5 (in) Raises Front 0 (in) - 3 (in)
- 1995.5-2004 TACOMA 0-3" LIFT STAGE 3 SUSPENSION SYSTEM
- 95.5-04 TACOMA 0-3" STAGE 3 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys - 20x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- California Prop 65 Warning: Yes
- Maximum Lift: 3
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable remote reservoir coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" hardened chrome shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear remote reservoir shock with 5/8" polished chrome plated steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 3 system includes vehicle-specific tuned 2.5” coilover shocks featuring a remote reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 96-04 Toyota Tacoma 4WD/PreRunner Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1999 - Toyota Tacoma | Front and Rear | 4WD |
- 0" - 3" Lift
- 1996-2002 TOYOTA 4RUNNER 0-3" LIFT STAGE 2 SUSPENSION SYSTEM
- 96-02 4RUNNER 0-3" STAGE 2 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- California Prop 65 Warning: Yes
- Maximum Lift: 3
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- CNC machined 6061 aircraft-grade aluminum components
- Tubular steel upper control arms feature ICON Delta Joints
- Bolt-on design makes for straightforward install
- Decreased body roll
- Vehicle-specific tuned front and rear shocks provide superior damping and control
- Coilovers are adjustable from 0-3" of lift height
- ICON engineered rear coils provide 1" of lift and improved performance
- Shocks are fully rebuildable and revalveable
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- FK Rod End bearings for extended longevity and minimal deflection
- This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1999 - Toyota 4Runner | Front and Rear |
- 0" - 3" Lift
- 1996-2002 TOYOTA 4RUNNER 0-3" LIFT STAGE 4 SUSPENSION SYSTEM
- 96-02 4RUNNER 0-3" STAGE 4 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- California Prop 65 Warning: Yes
- Maximum Lift: 3
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- Bolt-on design makes for straightforward install
- Decreased body roll
- Vehicle-specific tuned front and rear shocks provide superior damping and control
- Coilovers are adjustable from 0-3" of lift height
- Shocks are fully rebuildable and revalveable
- Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
- 2.5 Aluminum Series rear shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
- FK Rod End bearings for extended longevity and minimal deflection
- CNC machined 6061 aircraft-grade aluminum components
- ICON engineered rear coils provide 1" of lift and improved performance
- Tubular steel upper control arms feature ICON Delta Joints
- This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1999 - Toyota 4Runner | Front and Rear |
- Rear Raise Height 1.5 (in) Raises Front 0 (in) - 3 (in)
- 1995.5-20004 TACOMA 0-3" LIFT STAGE 4 SUSPENSION SYSTEM WITH TUBULAR UCA
- 95.5-04 TACOMA 0-3" STAGE 4 SUSPENSION SYSTEM W TUBULAR UCA
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys - 20x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- California Prop 65 Warning: Yes
- Maximum Lift: 3
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable extended travel remote reservoir coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear remote reservoir shock with 5/8" polished nitro steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1999 - Toyota Tacoma | Front and Rear | 4WD |
- 95.5-04 TACOMA 0-3" STAGE 4 SUSPENSION SYSTEM W TUBULAR UCA
- Rear Raise Height 1.5 (in) Raises Front 0 (in) - 3 (in)
- 1995.5-20004 TACOMA 0-3" LIFT STAGE 4 SUSPENSION SYSTEM WITH TUBULAR UCA
- 95.5-04 TACOMA 0-3" STAGE 4 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys - 20x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- California Prop 65 Warning: Yes
- Maximum Lift: 3
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable extended travel remote reservoir coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear remote reservoir shock with 5/8" polished nitro steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1999 - Toyota Tacoma | Front and Rear | Pre Runner | RWD |
- 0" - 3" Lift
- 1996-2002 TOYOTA 4RUNNER 0-3" LIFT STAGE 1 SUSPENSION SYSTEM
- 96-02 4RUNNER 0-3" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- California Prop 65 Warning: Yes
- Maximum Lift: 3
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- Decreased body roll
- Vehicle-specific tuned front and rear shocks provide superior damping and control
- Coilovers are adjustable from 0-3" of lift height
- Shocks are fully rebuildable and revalveable
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- FK Rod End bearings for extended longevity and minimal deflection
- CNC machined 6061 aircraft-grade aluminum components
- Bolt-on design makes for straightforward install
- The 1996-2002 Toyota 4Runner was an excellent vehicle off the showroom floor over a decade ago, and Toyota’s reputation for reliability and performance continues to draw the attention of both hardcore off-road enthusiasts and newcomers to the “3rd Gen” platform to this day. ICON engineers have assessed the 3rd Gen 4Runner front to back and developed components that work together to extract maximum performance out of the vehicle. With the ICON Stage 1 suspension system on and off-road performance is significantly improved with 2.5 VS Series coilovers and 2.0 Aluminum Series rear shocks. These components feature ICON engineered coil springs, vehicle-specific shock valving, FK Rod End bearings, and high-quality CNC-machined components for superior damping and control. Fully serviceable shock absorbers mean that these components can be rebuilt or re-valved as necessary, providing a long service life and the ability to customize the ride quality for unique vehicle setups. The 2.5 VS Series coilovers are height adjustable from 0-3” of lift, allowing the use of larger, more aggressive wheel and tire combinations. ICON Vehicle Dynamics' 1996-2002 4Runner Stage 1 suspension system is an excellent choice for those drivers looking to enhance the handling characteristics of their 3rd Gen on the road while increasing overall performance in the dirt.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1999 - Toyota 4Runner | Front and Rear |
- Rear Raise Height 1.5 (in) Raises Front 0 (in) - 3 (in)
- 1995.5-2004 TACOMA 0-3" LIFT STAGE 5 SUSPENSION SYSTEM WITH TUBULAR UCA
- 95.5-04 TACOMA 0-3" STAGE 5 SUSPENSION SYSTEM W TUBULAR UCA
- Product Attributes:
- AAP_UDA_12: Ea
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys - 20x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
- Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- California Prop 65 Warning: Yes
- Maximum Lift: 3
- AAP_UDA_4: 55
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable extended travel remote reservoir coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear remote reservoir shock with 5/8" polished nitro steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1999 - Toyota Tacoma | Front and Rear | 4WD |
Showing 1 - 10 of 54 products
Loading...