Image
Product
Price
- 2007-2018 JEEP JK REAR LOWER ADJUSTABLE LINK KIT
- 07-18 JK REAR LOWER ADJ LINK KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Grade Type: Performance
- Mounting Hardware Included: Yes
- California Prop 65 Warning: Yes
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Grease Fitting Included: Yes
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Control Arm Color: Black
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Huge FK PTFE-lined rod ends
- Adjustable in length for rear pinion angle adjustment
- Offers controlled deflection with maximum articulation and responsiveness
- No grease required for life of bushings
- Easy install into OEM mounts with application specific hardware
- High quality semi-gloss black powder coat finish
- “ICON 1K” tested under rigorous off-road conditions to validate, performance, strength, and durability
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel rear lower link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends and multi durometer, maintenance free bushings for reduced deflection, link arm length adjustment and increased articulation, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Jeep Wrangler | Rear Lower |
- with 4.5" Suspension Lift
- 2003-2012 RAM HD 4.5" LIFT BOX KIT
- 03-12 RAM HD 4.5" BOX KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Colors: Black
- Bump Stops Included: Yes
- Material:
- Aluminum
- Steel
- California Prop 65 Warning: Yes
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2007 - Dodge Ram 3500 | 4WD |
- These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
- TOYOTA REAR 8.0" U-BOLT KIT
- Product Attributes:
- AAP_UDA_12: Ea
- Bolt Grade: 5
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Nuts Included: Yes
- Grade Type: Performance
- Material: Steel
- California Prop 65 Warning: Yes
- Finish: E-coat
-
Features:
- Measures 8 inches in length
- E-Coated for corrosion resistance
- Includes installation hardware
- For one axle
- These ICON U-bolts are a square design made from high-strength steel and E-Coated for corrosion resistance. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Toyota Tacoma | Rear | TRD Sport Prerunner |
- 07-14 FJ/03-24 4RNR/03-23 GX REAR 2" SPRING KIT
- These ICON linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires.
- 07-UP FJ/03-UP 4RNR/03-UP GX REAR 2" SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Rear Spring Rate Type:
- Constant
- Linear
- Rear Spring Seat Included: No
- Grade Type: Performance
- Maximum Lift Height: 2
- Spring Material: Steel
- California Prop 65 Warning: Yes
- Finish: Powdercoated
-
Features:
- Easy install makes for a simple and cost effective upgrade
- Linear-rate coil allows for exceptional ride quality and performance
- Dual stage powder coat for long-lasting corrosion resistance
- ICON engineered coil spring guaranteed for life against sagging and breaking
- These Linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires. When used in conjunction with ICON's rear 2.0 Aluminum Series or 2.5 Series shocks, the ride quality and performance is unbeatable.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Toyota FJ Cruiser | Rear |
- Raises Rear 2 (in)
- These ICON linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires.
- 07-14 FJ/03-24 4RNR/03-23 GX REAR 2" SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Rear Spring Rate Type: Linear
- Rear Spring Seat Included: No
- Grade Type: Performance
- Maximum Lift Height: 2
- Spring Material: Steel
- California Prop 65 Warning: Yes
- Finish: Powdercoated
-
Features:
- Easy install makes for a simple and cost effective upgrade
- Linear-rate coil allows for exceptional ride quality and performance
- Dual stage powder coat for long-lasting corrosion resistance
- ICON engineered coil spring guaranteed for life against sagging and breaking
- These Linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires. When used in conjunction with ICON's rear 2.0 Aluminum Series or 2.5 Series shocks, the ride quality and performance is unbeatable.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Toyota FJ Cruiser | Rear |
- 07-14 FJ/03-24 4RNR/03-23 GX TUBULAR UPPER TRAILING ARM KIT
- ICON’s tubular front upper trailing arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. PTFE-lined FK rod ends for increased suspension articulation and reduced deflection.
- 07-UP FJ/03-UP 4RNR/03-UP GX TUBULAR UPPER TRAILING ARM KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- California Prop 65 Warning: Yes
- Control Arm Material: Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Construction: Tubular
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM12T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel rear upper link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability and also utilize a multi durometer bushing that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance.The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Toyota FJ Cruiser | Rear Upper |
- ICON’s tubular front upper trailing arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. PTFE-lined FK rod ends for increased suspension articulation and reduced deflection.
- 07-14 FJ/03-24 4RNR/03-23 GX TUBULAR UPPER TRAILING ARM KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- California Prop 65 Warning: Yes
- Control Arm Material: Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Construction: Tubular
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM12T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel rear upper link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability and also utilize a multi durometer bushing that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance.The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Toyota 4Runner | Rear Upper |
- Also Requires Part Number 54302 Up to 33x11.50 (in) Tire with Minor Fender Trimming with Aftermarket Front Coilovers 0 (mm) Offset Aftermarket Wheels Recommended
- The ICON 05-23 Toyota Tacoma Lower Control Arm Kit is designed to be the ultimate stock width replacement control arm upgrade. Featuring a fabricated, boxed, steel plate construction, a clearance design, and secondary shock compatibility.
- 05-23 TACOMA LOWER CONTROL ARMS
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: No
- Quantity: Pair
- Bushing Color: Black
- End 1 Type: Bushing
- Control Arm Material: Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Control Arm Construction: Boxed
- Ball Joint Stud Type: Threaded
- End 2 Type: Ball Joint
- Adjustable: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Suspension Type: Spring
- Material: Steel
- AAP_UDA_12: Ea
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20" X 9" With 5" Backspace / 0mm Offset
- California Prop 65 Warning: Yes
- Grease Fitting Included: Yes
- Pre-Greased: Yes
- Construction: Boxed
- Reinforced: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- High clearance, stock width design
- Fully welded boxed steel construction with internal ribs for maximum strength
- CNC laser cut and brake formed steel plate
- ICON secondary shock compatibility with ICON S2 Shock Hoops (sold separately)
- Recessed coilover mounting points
- Pocketed lower plates allow drainage and easy access to coilover mounting hardware
- Angled front plates and relocated steering stops help arms slide over obstacles and prevent trail hang ups
- CNC machined forged ball joint housings ensure strength and CV boot clearance
- Metal on metal, greaseable lower ball joints for longevity and noise free operation
- Maintenance free bonded polyurethane bushings
- Semi-gloss black powder coat finish for corrosion resistance
- Fabricated components covered by ICON’s Limited Lifetime Warranty
- The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Lower Control Arm Kit is designed to be the ultimate stock width replacement control arm upgrade. Their fully welded, boxed, CNC laser cut and brake formed steel plate construction is internally braced with multiple ribs to offer significantly improved strength over the stock Tacoma LCAs. Featuring a high ground clearance design, specially angled plates also allow the arms to easily slide over larger obstacles out on the trail. CNC machined forged steel ball joint housings maintain the highest possible ground clearance while also ensuring strength and appropriate CV boot clearance on 4WD Tacoma models. Rather than using traditional top mounted coilover mounting tabs, these LCAs utilize recessed coilover mounts, further increasing strength and provide race inspired styling. Their incorporated secondary shock mounting tabs tie seamlessly into the ICON S2 Secondary Shock System for a fully bolt-on installation of multiple secondary shock options to effectively double the shock damping ability of the front suspension and improve off-road performance. To make these arms as much at home on the street as they are on the trail, the lower ball joints are of a metal on metal and greaseable design to avoid the short service life and noises typically associated with uniballs while also being able to withstand the abuses of aggressive off-road use. The inner pivot bushings are bonded polyurethane to the outer sleeve and unbonded inner sleeve to minimize deflection and improve handling characteristics while allowing unhindered suspension movement though the entire travel range. Additionally, these specialty bushings do not require any greasing or other maintenance throughout their service life. With features like these, the ICON 2005-2023 Toyota Tacoma Lower Control Arm Kit would make an incredible addition to round out your Tacoma’s suspension system.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Toyota Tacoma | Front Lower | SR5 Prerunner |
- 07-14 FJ/03-24 4RNR/03-23 GX REAR ADJ TRACK BAR KIT
- Optimize your rig’s handling and rear axle alignment to avoid premature tire wear and unwanted handling characteristics, especially on lifted vehicles. Bar installs easily and can be adjusted on the vehicle to properly center the rear axle.
- 07-UP FJ/03-UP 4RNR/03-UP GX REAR ADJ TRACK BAR KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Bushing
- Greaseable: Yes
- California Prop 65 Warning: Yes
- Finish: Powdercoated
- AAP_UDA_4: 55
- Grease Fitting Included: Yes
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Material: Dom Steel
- Service Parts: 614511 - 54200 Bushing And Sleeve Kit
-
Features:
- Helps to free up bind during rear suspension travel and articulation
- Heavy Duty PTFE-lined FK Rod End for maximum articulation
- On-vehicle adjustable for precise track alignment using ICON’s double adjuster
- Greasable dual stage polyurethane bushing for maximum angularity and noise isolation
- CNC machined and bent 1-1/4" X .250 wall 1026 DOM tubing
- Multi-stage black powder coat finish
- While highly recommended for all FJ, 4Runner and GX builds, Kinetic Dynamic Suspension System (KDSS) equipped vehicles require this adjustable rear track bar to increase clearance from the KDSS components as the suspension approaches full extension.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Toyota 4Runner | Rear |
- Optimize your rig’s handling and rear axle alignment to avoid premature tire wear and unwanted handling characteristics, especially on lifted vehicles. Bar installs easily and can be adjusted on the vehicle to properly center the rear axle.
- 07-14 FJ/03-24 4RNR/03-23 GX REAR ADJ TRACK BAR KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Bushing
- Greaseable: Yes
- California Prop 65 Warning: Yes
- Finish: Powdercoated
- AAP_UDA_4: 55
- Grease Fitting Included: Yes
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Material: Dom Steel
- Service Parts: 614511 - 54200 Bushing And Sleeve Kit
-
Features:
- Helps to free up bind during rear suspension travel and articulation
- Heavy Duty PTFE-lined FK Rod End for maximum articulation
- On-vehicle adjustable for precise track alignment using ICON’s double adjuster
- Greasable dual stage polyurethane bushing for maximum angularity and noise isolation
- CNC machined and bent 1-1/4" X .250 wall 1026 DOM tubing
- Multi-stage black powder coat finish
- While highly recommended for all FJ, 4Runner and GX builds, Kinetic Dynamic Suspension System (KDSS) equipped vehicles require this adjustable rear track bar to increase clearance from the KDSS components as the suspension approaches full extension.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Toyota 4Runner | Rear |
Showing 1 - 10 of 229 products
Loading...