2009 Toyota ICON Vehicle Dynamics Parts
Choose a Model for your 2009 Toyota
Image
Product
Price
- Raises Rear 2 (in)
- These ICON linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires.
- 07-14 FJ/03-24 4RNR/03-23 GX REAR 2" SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Rear Spring Rate Type: Linear
- Rear Spring Seat Included: No
- Grade Type: Performance
- Maximum Lift Height: 2
- Spring Material: Steel
- California Prop 65 Warning: Yes
- Finish: Powdercoated
-
Features:
- Easy install makes for a simple and cost effective upgrade
- Linear-rate coil allows for exceptional ride quality and performance
- Dual stage powder coat for long-lasting corrosion resistance
- ICON engineered coil spring guaranteed for life against sagging and breaking
- These Linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires. When used in conjunction with ICON's rear 2.0 Aluminum Series or 2.5 Series shocks, the ride quality and performance is unbeatable.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Toyota FJ Cruiser | Rear |
- 07-14 FJ/03-24 4RNR/03-23 GX TUBULAR UPPER TRAILING ARM KIT
- ICON’s tubular front upper trailing arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. PTFE-lined FK rod ends for increased suspension articulation and reduced deflection.
- 07-UP FJ/03-UP 4RNR/03-UP GX TUBULAR UPPER TRAILING ARM KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- California Prop 65 Warning: Yes
- Control Arm Material: Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Construction: Tubular
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM12T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel rear upper link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability and also utilize a multi durometer bushing that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance.The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Toyota FJ Cruiser | Rear Upper |
- 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Requires ICON Skid Plate Part # 56101 to Complete System
- The S2 Modular Performance shock system utilizes the factory lower control arm and maintains OE track width while providing the ability to bolt on a secondary from shock aborber for addition shock damping.
- 07-UP FJ/03-UP 4RUNNER/05-UP TACOMA S2 SHOCK HOOP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Dom Steel
- California Prop 65 Warning: Yes
-
Features:
- Does not require welding to the frame
- Retains robust factory bumpstops
- Does not require aftermarket lower control arms
- Can be purchased in stages
- Simple installation
- Lifetime Warranty on fabricated and machined parts
- The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options provides even further tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Toyota Tacoma | Front |
- Used with 0 (in) to 3.5 (in) Lift Also Requires Part Number 56101 and Number 59706P, 59706CP, or 59906P Use Up To 33 (in) x 11.50 (in) Tires 0 (mm) Offset Wheels Recommended
- The S2 Modular Performance shock system utilizes the factory lower control arm and maintains OE track width while providing the ability to bolt on a secondary from shock aborber for addition shock damping.
- 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Dom Steel
- California Prop 65 Warning: Yes
-
Features:
- Does not require welding to the frame
- Retains robust factory bumpstops
- Does not require aftermarket lower control arms
- Can be purchased in stages
- Simple installation
- Lifetime Warranty on fabricated and machined parts
- The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options provides even further tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Toyota FJ Cruiser | Front |
- 07-14 FJ/03-24 4RNR/03-23 GX 1-3" REAR 2.0 VS IR
- with 1 (in) - 3 (in) Suspension Lift
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 07-14 FJ/03-23 4RNR/03-23 GX 1-3" REAR 2.0 VS IR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: Yes
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration:
- One Piece
- Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: Yes
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 3
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective suspension upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2009 - Toyota 4Runner | Rear | Sport |
- Used with 0" to 2" Lift
- 2008-UP LAND CRUSIER 200 SERIES 0-2" LIFT REAR 2.5 VS NON RESERVOR SHOCK PAIR
- 08-UP LC 200 0-2" REAR 2.5 VS NR PAIR
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Upper Mount Type: Stem
- Tube Outside Diameter: 2.5
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Boot Included: No
- Damping Type: Oil
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- External Reservoir: No
- Bore Diameter: 2.25
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611007 - 9/16 Medium Duty Stem Bushing Kit
- Shaft Diameter: 0.875
-
Features:
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- Increase in strength and heat dissipation when compared to ICON V.S. 2.0 Series shocks
- Nitrogen charged monotube design with internal reservoir
- Polyurethane bushings and forged steel mounting stems for OE factory type fitment
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 7/8” diameter induction hardened, chrome plated shock shafts
- 100% Rebuildable
- 100% Revalveable
- ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. The larger diameter and oil volume of ICON 2.5 IR Series shocks provide better ride quality and heat dissipation properties than the standard 2.0 Aluminum Series IR Shocks. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDC Valve) or the Omega Series bypass shocks.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Toyota Land Cruiser | Rear |
- These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
- TOYOTA REAR 8.0" U-BOLT KIT
- Product Attributes:
- AAP_UDA_12: Ea
- Bolt Grade: 5
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Nuts Included: Yes
- Grade Type: Performance
- Material: Steel
- California Prop 65 Warning: Yes
- Finish: E-coat
-
Features:
- Measures 8 inches in length
- E-Coated for corrosion resistance
- Includes installation hardware
- For one axle
- These ICON U-bolts are a square design made from high-strength steel and E-Coated for corrosion resistance. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2009 - Toyota Tacoma | Rear | Pre Runner |
- 07-14 FJ/03-24 4RNR/03-23 GX REAR ADJ TRACK BAR KIT
- Optimize your rig’s handling and rear axle alignment to avoid premature tire wear and unwanted handling characteristics, especially on lifted vehicles. Bar installs easily and can be adjusted on the vehicle to properly center the rear axle.
- 07-UP FJ/03-UP 4RNR/03-UP GX REAR ADJ TRACK BAR KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Bushing
- Greaseable: Yes
- California Prop 65 Warning: Yes
- Finish: Powdercoated
- AAP_UDA_4: 55
- Grease Fitting Included: Yes
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Material: Dom Steel
- Service Parts: 614511 - 54200 Bushing And Sleeve Kit
-
Features:
- Helps to free up bind during rear suspension travel and articulation
- Heavy Duty PTFE-lined FK Rod End for maximum articulation
- On-vehicle adjustable for precise track alignment using ICON’s double adjuster
- Greasable dual stage polyurethane bushing for maximum angularity and noise isolation
- CNC machined and bent 1-1/4" X .250 wall 1026 DOM tubing
- Multi-stage black powder coat finish
- While highly recommended for all FJ, 4Runner and GX builds, Kinetic Dynamic Suspension System (KDSS) equipped vehicles require this adjustable rear track bar to increase clearance from the KDSS components as the suspension approaches full extension.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Toyota FJ Cruiser | Rear |
- Used with 0 (in) to 3.5 (in) Lift Also Requires Part Number 56101 Also Requires Part Number 59706P, 59706CP, or 59906P Use Up To 33 (in) x 11.50 (in) Tires 0 (mm) Offset Wheels Recommended
- The S2 Modular Performance shock system utilizes the factory lower control arm and maintains OE track width while providing the ability to bolt on a secondary from shock aborber for addition shock damping.
- 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Dom Steel
- California Prop 65 Warning: Yes
-
Features:
- Does not require welding to the frame
- Retains robust factory bumpstops
- Does not require aftermarket lower control arms
- Can be purchased in stages
- Simple installation
- Lifetime Warranty on fabricated and machined parts
- The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options provides even further tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2009 - Toyota Tacoma | Front | SR5 Prerunner |
- 07-14 FJ/03-24 4RNR/03-23 GX 1-3" REAR 2.5 VS RR CDCV PAIR
- Used with 1" to 3" Lift
- ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable/revalveable.
- 07-UP FJ/03-UP 4RNR/03-UP GX 1-3" REAR 2.5 VS RR CDCV PAIR
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color:
- Gray
- Silver
- Grade Type: Performance
- Mounting Hardware Included: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Adjustable: Yes
- Bore Diameter: 2.25
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611007 - 9/16 Medium Duty Stem Bushing Kit
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Upper Mount Type: Stem
- Tube Outside Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Manual
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Cylinder Diameter: 2.5
- External Reservoir: Yes
-
Features:
- ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with piggyback reservoir
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 100% Rebuildable
- 100% Revalveable
- ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. If you are looking for a more user defined tune, consider looking into the Omega Series bypass shocks.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Toyota FJ Cruiser | Rear |
Showing 1 - 10 of 154 products
Loading...