Image
Product
Price
- 09-23 RAM 1500 REAR 1.5" DUAL RATE SPRING KIT
- Rear Raise Height 1.5 (in)
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 09-UP RAM 1500 REAR 1.5" DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Rear Spring Rate Type:
- Progressive Dual Rate
- Variable
- Grade Type: Performance
- California Prop 65 Warning: Yes
- Finish: Powdercoated
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 1.5
- Bump Stops Included: No
- Spring Material: Steel
- Material: Steel
-
Features:
- 1.5" rear lift height over stock
- Dual rate rear coil springs with ICON-engineered spring rates
- Increase in rear wheel travel when paired with ICON shocks
- Dual stage powder coating for corrosion resistance
- Lifetime guarantee against sagging/breakage
- ICON 1K tested under rigorous off-road conditions to validate performance, strength, and durability
- The ICON Dodge Ram 1500 rear coil springs provide 1.5" of lift height and feature a dual rate design with ICON-engineered ride and overload rates. This dual rate design allows for a soft rate at ride height for superb on-road comfort and a firmer secondary rate that increases during compression for excellent payload support, bottoming resistance, and off-road performance. Like all ICON coil springs they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2009-2023 Dodge Ram 1500.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model |
|---|---|---|---|
| 2012 - Ram 1500 | Coil | Rear | Sport |
- Use Up To 33 (in) x 11.50 (in) Tires Raises Rear 1.5 (in) 0 (mm) Offset Aftermarket Wheels Recommended
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 09-23 RAM 1500 REAR 1.5" DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Rear Spring Rate Type: Progressive Dual Rate
- Grade Type: Performance
- California Prop 65 Warning: Yes
- Finish: Powdercoated
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 1.5
- Bump Stops Included: No
- Spring Material: Steel
- Material: Steel
-
Features:
- 1.5" rear lift height over stock
- Dual rate rear coil springs with ICON-engineered spring rates
- Increase in rear wheel travel when paired with ICON shocks
- Dual stage powder coating for corrosion resistance
- Lifetime guarantee against sagging/breakage
- ICON 1K tested under rigorous off-road conditions to validate performance, strength, and durability
- The ICON Dodge Ram 1500 rear coil springs provide 1.5" of lift height and feature a dual rate design with ICON-engineered ride and overload rates. This dual rate design allows for a soft rate at ride height for superb on-road comfort and a firmer secondary rate that increases during compression for excellent payload support, bottoming resistance, and off-road performance. Like all ICON coil springs they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2009-2023 Dodge Ram 1500.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model |
|---|---|---|---|
| 2012 - Ram 1500 | Coil | Rear | Sport |
- These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
- TOYOTA REAR 8.0" U-BOLT KIT
- Product Attributes:
- AAP_UDA_12: Ea
- Bolt Grade: 5
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Nuts Included: Yes
- Grade Type: Performance
- Material: Steel
- California Prop 65 Warning: Yes
- Finish: E-coat
-
Features:
- Measures 8 inches in length
- E-Coated for corrosion resistance
- Includes installation hardware
- For one axle
- These ICON U-bolts are a square design made from high-strength steel and E-Coated for corrosion resistance. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Toyota Tacoma | Rear | Pre Runner |
- 07-14 FJ/03-24 4RNR/03-23 GX REAR 2" SPRING KIT
- Requires ICON Rear Coil Conversion Kit Part # 56110 if Equipped with Air Suspension
- These ICON linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires.
- 07-UP FJ/03-UP 4RNR/03-UP GX REAR 2" SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Rear Spring Rate Type:
- Constant
- Linear
- Rear Spring Seat Included: No
- Grade Type: Performance
- Maximum Lift Height: 2
- Spring Material: Steel
- California Prop 65 Warning: Yes
- Finish: Powdercoated
-
Features:
- Easy install makes for a simple and cost effective upgrade
- Linear-rate coil allows for exceptional ride quality and performance
- Dual stage powder coat for long-lasting corrosion resistance
- ICON engineered coil spring guaranteed for life against sagging and breaking
- These Linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires. When used in conjunction with ICON's rear 2.0 Aluminum Series or 2.5 Series shocks, the ride quality and performance is unbeatable.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Lexus GX460 | Rear |
- 07-14 FJ/03-24 4RNR/03-23 GX TUBULAR UPPER TRAILING ARM KIT
- ICON’s tubular front upper trailing arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. PTFE-lined FK rod ends for increased suspension articulation and reduced deflection.
- 07-UP FJ/03-UP 4RNR/03-UP GX TUBULAR UPPER TRAILING ARM KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- California Prop 65 Warning: Yes
- Control Arm Material: Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Construction: Tubular
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM12T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel rear upper link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability and also utilize a multi durometer bushing that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance.The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Toyota FJ Cruiser | Rear Upper |
- Used with 0 (in) to 3.5 (in) Lift without KDSS Also Requires Part Number 56106 and Number 59706P, 59706CP, or 59906P Use Up To 33 (in) x 11.50 (in) Tires 0 (mm) Offset Wheels Recommended
- The S2 Modular Performance shock system utilizes the factory lower control arm and maintains OE track width while providing the ability to bolt on a secondary from shock aborber for addition shock damping.
- 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Dom Steel
- California Prop 65 Warning: Yes
-
Features:
- Does not require welding to the frame
- Retains robust factory bumpstops
- Does not require aftermarket lower control arms
- Can be purchased in stages
- Simple installation
- Lifetime Warranty on fabricated and machined parts
- The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options provides even further tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Toyota 4Runner | Front |
- Used with 0 (in) to 3.5 (in) Lift Also Requires Part Number 56101 Also Requires Part Number 59706P, 59706CP, or 59906P Use Up To 33 (in) x 11.50 (in) Tires 0 (mm) Offset Wheels Recommended
- The S2 Modular Performance shock system utilizes the factory lower control arm and maintains OE track width while providing the ability to bolt on a secondary from shock aborber for addition shock damping.
- 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Dom Steel
- California Prop 65 Warning: Yes
-
Features:
- Does not require welding to the frame
- Retains robust factory bumpstops
- Does not require aftermarket lower control arms
- Can be purchased in stages
- Simple installation
- Lifetime Warranty on fabricated and machined parts
- The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options provides even further tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Toyota Tacoma | Front | TRD Sport |
- Use Up To 33 (in) x 11.50 (in) Tires Raises Front .75 (in) - 2.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 19-UP RAM 1500 2/4WD 09-18 RAM 1500 4WD 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- (2009-up Models) Icon Alloys - 17x8.5" W/ 4.75" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys - 18x9" W/ 5" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys - 20x9" W/ 5" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys | 17x8.5" W/ 4.75" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys | 18x9" W/ 5" Backspace / 0mm Offset
- (2009-up Models) Icon Alloys | 20x9" W/ 5" Backspace / 0mm Offset
- (2019-up Models) Icon Alloys - 18x9" W/ 5" Backspace / 0mm Offset
- (2019-up Models) Icon Alloys - 20x9" W/ 5" Backspace / 0mm Offset
- (2019-up Models) Icon Alloys | 18x9" W/ 5" Backspace / 0mm Offset
- (2019-up Models) Icon Alloys | 20x9" W/ 5" Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Clevis
- Shock Absorber Rod End Measuring Point: Center Of Clevis Holes
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Adjustable coilovers yield .75-2.5” of front lift height on '09-'18 models or 0-1.5" of lift on '19-Up models
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" shaft
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- ICON's Vehicle Specific (V.S.) 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model | Drive Type |
|---|---|---|---|---|
| 2012 - Ram 1500 | Front | Coil | SLT | 4WD |
- 09-23 RAM 1500 TUBULAR UCalifornia DJ KIT
- These upper control arms feature ICON's patented Delta Joint, a heavy-duty high-angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball.
- 09-UP RAM 1500 TUBULAR UCalifornia DJ KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- End 1 Type: Bushing
- Finish: Powdercoated
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Ball Joint
- Adjustable: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Adjustable Control Arm: No
- Suspension Type: Spring
- Material: Dom Steel
- Service Parts:
- 614502 - 218550 Replacement Bushing And Sleeve Kit
- 614519 - Delta Joint Install Press Adapter Tube
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: Yes
- Attachments Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- ICON Delta Joint
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Front Spring |
|---|---|---|
| 2012 - Ram 1500 | Front Upper | Coil |
- 09-23 RAM 1500 TUBULAR UCalifornia DJ KIT
- Use Up To 33 (in) x 11.50 (in) Tires; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- These upper control arms feature ICON's patented Delta Joint, a heavy-duty high-angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball.
- 09-UP RAM 1500 TUBULAR UCalifornia DJ KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- End 1 Type: Bushing
- Finish: Powdercoated
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Ball Joint
- Adjustable: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Adjustable Control Arm: No
- Suspension Type: Spring
- Material: Dom Steel
- Service Parts:
- 614502 - 218550 Replacement Bushing And Sleeve Kit
- 614519 - Delta Joint Install Press Adapter Tube
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: Yes
- Attachments Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- ICON Delta Joint
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model |
|---|---|---|---|
| 2012 - Ram 1500 | Front Upper | Coil | ST |
Showing 1 - 10 of 259 products
Loading...