Image
Product
Price
- 07-21 TUNDRA REAR EXPANSION PACK KIT
- This kit replaces the factory secondary leaves, retaining the main and overload units to soften the spring rate and improve ride comfort while also increasing ride height, maintaining load and towing capacities, and increasing wheel travel.
- 07-UP TUNDRA REAR EXPANSION PACK KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Maximum Lift: 1.5
- Axle Modification Needed: No
- Leaf Quantity: 3
- Suspension Grade Type: Performance
- Axle Orientation: Rear
- U Bolts Included: Yes
- Material: Steel
- California Prop 65 Warning: Yes
-
Features:
- Improved Ride Quality
- 1.5" Rear lift Height
- Maintains Factory Load & Towing Capacities
- Increased Wheel Travel
- Easy Installation
- Unlike traditional add-a-leafs that obtain lift height at the cost of stiffening the spring rate and sacrificing ride quality, the 2007-2021 Toyota Tundra Rear Leaf Spring Expansion Pack replaces all the factory secondary leaves while only retaining the factory main and overload springs. This allows us to soften the spring rate to increase ride comfort while also increasing ride height, maintaining load and towing capacities, and increasing wheel travel when paired with ICON shock absorbers. A new U-bolt kit is also included to make the insalltion a breeze. Features like these make the 2007-2021 Toyota Tundra Rear Leaf Spring Expansion Pack is an excellent option for most users, but for those looking to maximuze the performance of the Tundra's rear springs, consider the ICON Multi-Rate Leaf Spring, part # 158509.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Toyota Tundra | Rear |
- These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
- TOYOTA REAR 8.0" U-BOLT KIT
- Product Attributes:
- AAP_UDA_12: Ea
- Bolt Grade: 5
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Nuts Included: Yes
- Grade Type: Performance
- Material: Steel
- California Prop 65 Warning: Yes
- Finish: E-coat
-
Features:
- Measures 8 inches in length
- E-Coated for corrosion resistance
- Includes installation hardware
- For one axle
- These ICON U-bolts are a square design made from high-strength steel and E-Coated for corrosion resistance. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Toyota Tacoma | Rear |
- with Additional Weight Added to Rear of Vehicle Raises Rear 3 (in)
- Developed for the expedition-style off-roader that loads down their vehicle with bumpers, winches, rooftop tents, etc., these ICON coil springs will provide 3" of lift in an unloaded vehicle, and 2" of lift with typical overland equipment.
- 07-14 FJ/03-24 4RUNNER REAR 3" DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Rear Spring Rate Type: Progressive Dual Rate
- Rear Spring Seat Included: No
- Grade Type: Performance
- Maximum Lift Height: 3
- Spring Material: Steel
- California Prop 65 Warning: Yes
- Finish: Powdercoated
-
Features:
- Up to 3" of rear lift
- Easy install makes for a simple and cost effective upgrade
- Multi-rate coil allows for exceptional ride quality whether loaded down or empty
- Great option for aggressive drivers as second rate will help reduce bottom-out
- ICON engineered coil springs guaranteed for life against sagging and breaking
- The ICON Vehicle Dynamics Overland Series Rear Coil Spring Kit was developed for the expedition-style offroader who is loading down their vehicle with bumpers, winches, rooftop tents, and more. ICON engineers developed this multi-rate coil spring to provide compliant handling and the exceptional on and off-road ride quality you would expect from an ICON product. This coil spring kit will deliver 3" of lift in an unloaded vehicle, and 2" of lift when loaded down with a typical list of overland equipment. Like all ICOn coil springs, these springs are guaranteed for life not to sag or break.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Toyota 4Runner | Rear |
- 07-14 FJ/03-24 4RNR/03-23 GX TUBULAR UPPER TRAILING ARM KIT
- ICON’s tubular front upper trailing arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. PTFE-lined FK rod ends for increased suspension articulation and reduced deflection.
- 07-UP FJ/03-UP 4RNR/03-UP GX TUBULAR UPPER TRAILING ARM KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- California Prop 65 Warning: Yes
- Control Arm Material: Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Construction: Tubular
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM12T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel rear upper link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability and also utilize a multi durometer bushing that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance.The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Toyota 4Runner | Rear Upper |
- Used with 0 (in) to 2.75 (in) Lift Also Requires Part Number 56107 Also Requires Part Number 59706P, 59706CP, or 59906P Use Up To 33 (in) x 11.50 (in) Tires 0 (mm) Offset Wheels Recommended
- The S2 Modular Performance shock system utilizes the factory lower control arm and maintains OE track width while providing the ability to bolt on a secondary from shock aborber for addition shock damping.
- 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Dom Steel
- California Prop 65 Warning: Yes
-
Features:
- Does not require welding to the frame
- Retains robust factory bumpstops
- Does not require aftermarket lower control arms
- Can be purchased in stages
- Simple installation
- Lifetime Warranty on fabricated and machined parts
- The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options provides even further tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Toyota Tacoma | Front | Sport |
- Used with 0 (in) to 1.25 (in) Lift Use Up To 33 (in) x 11.50 (in) Tires Requires Welding ; Recommended Aftermarket Wheel Size: 17x8.5 with 4.75” Backspace / 0mm Offset
- 2016-UP TACOMA LCalifornia SKID PLATE KIT
- 16-23 TACOMA SKID PLATE KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Mounting Hardware Included: Yes
- Configuration: One Piece
- Mount Hole Quantity: 3
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Attachment Type: Bolt On
- Surface Material: Powdercoated
- Logo Location: Left And Right
- Drilling Required: Yes
- Material: Steel
-
Features:
- Bolt-on design
- Made from 3/16" laser cut steel
- Durable black powdercoat finish
- Serves as the lower shock mount for our S2 Modular Secondary Shock System
- Adds protection from rocks and trail debris during on or off-road use
- The ICON bolt on skid plate system also serves as a locator for the lower shock mount for our S2 Modular Performance Shock System. This modular approach allows you to install these skid plates without waste if you decide to upgrade and add the full S2 system down the road. You are able to purchase knowing it is 1 of the 3 components you will need to run the S2 Secondary Shock System, giving you the opportunity to build in stages if you choose.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Toyota Tacoma | Suspension Control Arm (Front) | TRD Pro |
- with 2 (in) Maximum Lift Rear
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved performance. These shocks feature remote reservoirs, are vehicle specific, 100% rebuildable/revalveable.
- 05-23 TACOMA 4WD 0-1.5" REAR 2.0 VS RR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: Yes
- External Reservoir: Yes
- Remote Reservoir: Yes
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Adjustable: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Internal Construction Type: Single Tube
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 2
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Toyota Tacoma | Rear | TRD Off-Road |
- 07-14 FJ/03-24 4RNR/03-23 GX 1-3" REAR 2.0 VS IR
- with 1 (in) - 3 (in) Suspension Lift
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 07-14 FJ/03-23 4RNR/03-23 GX 1-3" REAR 2.0 VS IR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: Yes
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration:
- One Piece
- Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: Yes
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 3
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective suspension upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Toyota 4Runner | Rear | Base |
- Used with 0" to 2" Lift
- 2008-UP LAND CRUSIER 200 SERIES 0-2" LIFT REAR 2.5 VS NON RESERVOR SHOCK PAIR
- 08-UP LC 200 0-2" REAR 2.5 VS NR PAIR
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Upper Mount Type: Stem
- Tube Outside Diameter: 2.5
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Boot Included: No
- Damping Type: Oil
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- External Reservoir: No
- Bore Diameter: 2.25
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611007 - 9/16 Medium Duty Stem Bushing Kit
- Shaft Diameter: 0.875
-
Features:
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- Increase in strength and heat dissipation when compared to ICON V.S. 2.0 Series shocks
- Nitrogen charged monotube design with internal reservoir
- Polyurethane bushings and forged steel mounting stems for OE factory type fitment
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 7/8” diameter induction hardened, chrome plated shock shafts
- 100% Rebuildable
- 100% Revalveable
- ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. The larger diameter and oil volume of ICON 2.5 IR Series shocks provide better ride quality and heat dissipation properties than the standard 2.0 Aluminum Series IR Shocks. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDC Valve) or the Omega Series bypass shocks.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Toyota Land Cruiser | Rear |
- These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
- TOYOTA REAR 8.0" U-BOLT KIT
- Product Attributes:
- AAP_UDA_12: Ea
- Bolt Grade: 5
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Nuts Included: Yes
- Grade Type: Performance
- Material: Steel
- California Prop 65 Warning: Yes
- Finish: E-coat
-
Features:
- Measures 8 inches in length
- E-Coated for corrosion resistance
- Includes installation hardware
- For one axle
- These ICON U-bolts are a square design made from high-strength steel and E-Coated for corrosion resistance. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Toyota Tacoma | Rear | SR |
Showing 1 - 10 of 204 products
Loading...