2018 Ford ICON Vehicle Dynamics Parts
Choose a Model for your 2018 Ford
Image
Product
Price
- 17-24 FSD 3-6" REAR 2.5 VS PB CDEV PAIR
- Used with 3 (in) to 6 (in) Lift Also Requires Part Number 93500 and Number 61721E, 67710EP or 67720EP
- ICON Vehicle Specific 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured for each application in both length and damping tune.
- 17-UP FSD 0-3" REAR 2.5 VS PB CDEV PAIR
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color:
- Gray
- Grey
- Grade Type: Performance
- Mounting Hardware Included: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Adjustable:
- Electronically
- Yes
- Bore Diameter: 2.25
- Service Parts:
- 191015 - 10" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257344 - 7/8 Shaft 18.85 Oal, 14.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Cylinder Diameter: 2.5
- External Reservoir: Yes
-
Features:
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2018 - Ford F-350 Super Duty | Rear | XLT | 4WD |
- 17-24 FSD 3-6" REAR 2.5 VS PB CDEV PAIR
- Also Requires Part Number 93500 and Number 61721E, 67810EP, or 67820EP Requires iOS operated device to run ICON Intelligent Control App with 3 (in) - 6 (in) Suspension Lift
- ICON Vehicle Specific 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured for each application in both length and damping tune.
- 17-24 FSD 0-3" REAR 2.5 VS PB CDEV PAIR
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Gray
- Grade Type: Performance
- Mounting Hardware Included: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Adjustable: Yes
- Bore Diameter: 2.25
- Service Parts:
- 191015 - 10" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257344 - 7/8 Shaft 18.85 Oal, 14.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Cylinder Diameter: 2.5
- External Reservoir: Yes
-
Features:
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|
| 2018 - Ford F-350 Super Duty | Rear | XL | Extended Cab Pickup | 4WD |
- with 1.75 (in) - 3 (in) Suspension Lift Use Up To 33 (in) x 11.50 (in) Tires with OE Spindles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset
- ICON tubular upper control arms feature 1026 DOM tube construction, PTFE-lined rod ends, and ICON’s Delta Joint, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
- 04-20 F150 TUBULAR UCalifornia DJ KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Ball Joint Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.625" Backspace / 16mm Offset
- Icon Alloys | 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Greaseable: Yes
- California Prop 65 Warning: Yes
- Finish: Powdercoat
- AAP_UDA_4: 55
- Ball Joint Stud Type: Threaded
- Grease Fitting Included: Yes
- Adjustable: No
- Grease Fittings Included: Yes
- Pre-Greased: No
- Construction: Tubular
- Ball Joint Mounting Type: Press In
- Material: Dom Steel
- Service Parts:
- 614503 -98500 / 98501 / 98550 Replacement Bushing And Sleeve Kit
- 614519 - Delta Joint Install Press Adapter Tube
- 614554 - 04-up F150/09-up Ram 1500 Delta Joint Kit
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- Take the performance of your 2004-2020 Ford F150 to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our 2.5 series coilovers, this translates into superior performance and ride quality for your 2004-2020 Ford F150. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Ford F-150 | Front Upper | Platinum |
- Raises Front 2 (in) - 2.63 (in) Use Up To 33 (in) x 11.50 (in) Tires ; Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset Lift heights above 2” over stock may require aftermarket front upper control arms to maintain proper alignment
- 2015-2020 F150 4WD 2-2.63" LIFT 2.5 VS REMOTE RTESERVOIR COILOVER KIT
- 15-20 F150 4WD 2-2.63" 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.625" Backspace / 16mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel over stock
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock both on and off-road
- Height-adjustable coilovers offer 1.75-2.63” of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- High strength alloy CNC machined lower bar pin
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- ICON Vehicle Dynamics V.S. Series 2.5” remote reservoir coilover shocks are an incredible upgrade for the front end of the 2015-2020 Ford F150 4WD. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while offering 2-2.63” of lift height adjustability for use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. When paired with ICON rear 2.0 Aluminum Series or 2.5" Series shocks, vehicle control will be balanced front to rear resulting in the best overall driving experience for your F150.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Drive Type |
|---|---|---|---|---|
| 2018 - Ford F-150 | Front | FLEX | Lariat | 4WD |
- with 1.75 (in) - 3 (in) Suspension Lift without Continuously Controlled Damping (CCD) System Use Up To 33 (in) x 11.50 (in) Tires with OE Spindles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset
- ICON tubular upper control arms feature 1026 DOM tube construction, PTFE-lined rod ends, and ICON’s Delta Joint, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
- 04-20 F150 TUBULAR UCalifornia DJ KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Ball Joint Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.625" Backspace / 16mm Offset
- Icon Alloys | 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Greaseable: Yes
- California Prop 65 Warning: Yes
- Finish: Powdercoat
- AAP_UDA_4: 55
- Ball Joint Stud Type: Threaded
- Grease Fitting Included: Yes
- Adjustable: No
- Grease Fittings Included: Yes
- Pre-Greased: No
- Construction: Tubular
- Ball Joint Mounting Type: Press In
- Material: Dom Steel
- Service Parts:
- 614503 -98500 / 98501 / 98550 Replacement Bushing And Sleeve Kit
- 614519 - Delta Joint Install Press Adapter Tube
- 614554 - 04-up F150/09-up Ram 1500 Delta Joint Kit
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- Take the performance of your 2004-2020 Ford F150 to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our 2.5 series coilovers, this translates into superior performance and ride quality for your 2004-2020 Ford F150. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Ford Expedition | Front Upper | Max Limited |
- 0 (in) - 2.63 (in) Lift
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 15-20 F150 4WD 0-2.63" 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.625" Backspace / 16mm Offset
- Icon Alloys | 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- 100% Bolt-on - no drilling,cutting or welding necessary for installation
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned for superior shock damping and control
- Adjustable 0-2.63" lift height
- ICON engineered Eibach Springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front end of 2015-2020 Ford F-150 4WD trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 0-2.63” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your F-150 truck.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2018 - Ford F-150 | Front | King Ranch | 4WD |
- Raises Front 0 (in) - 2.13 (in) Use Up To 33 (in) x 11.50 (in) Tires ; Lift heights above 2” over stock may require aftermarket front upper control arms to maintain proper alignment Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 15-20 F150 4WD 0-2.63" 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.625" Backspace / 16mm Offset
- Icon Alloys | 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- 100% Bolt-on - no drilling,cutting or welding necessary for installation
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned for superior shock damping and control
- Adjustable 0-2.63" lift height
- ICON engineered Eibach Springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front end of 2015-2020 Ford F-150 4WD trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 0-2.63” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your F-150 truck.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Drive Type |
|---|---|---|---|---|
| 2018 - Ford F-150 | Front | DIESEL | King Ranch | 4WD |
- Raises Front 0 (in) - 2.63 (in) Use Up To 33 (in) x 11.50 (in) Tires 6 (mm) Offset Aftermarket Wheels Recommended ; Lift heights above 2” over stock may require aftermarket front upper control arms to maintain proper alignment
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 15-20 F150 4WD 0-2.63" 2.5 VS IR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.625" Backspace / 16mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock
- 100% Bolt-on - no drilling,cutting or welding necessary for installation
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned for superior shock damping and control
- Adjustable 0-2.63" lift height
- ICON engineered Eibach Springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front end of 2015-2020 Ford F-150 4WD trucks. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 0-2.63” of lift height adjustability allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your F-150 truck.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Drive Type |
|---|---|---|---|---|
| 2018 - Ford F-150 | Front | GAS | King Ranch | 4WD |
- 17-24 FSD 0-3" REAR 2.5 VS PB CDEV PAIR
- with 3 (in) Maximum Lift Rear Also Requires Part Number 93500 and Number 61720E or 67800EP
- These ICON VS 2.5 Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable/revalveable.
- 17-UP FSD 0-3" REAR 2.5 VS PB CDEV PAIR
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color:
- Gray
- Grey
- Grade Type: Performance
- Mounting Hardware Included: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Adjustable: Electronically
- Bore Diameter: 2.25
- Service Parts:
- 191015 - 10" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257342 - 7/8 Shaft 16.85 Oal, 12.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Cylinder Diameter: 2.5
- External Reservoir: Yes
-
Features:
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2018 - Ford F-350 Super Duty | Rear | XL | 4WD |
- with 1 (in) Maximum Lift Rear
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 09-23 F150 2/4WD 04-08 F150 4WD REAR VS 2.0 IR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: No
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 1
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model |
|---|---|---|---|
| 2018 - Ford F-150 | Leaf | Rear | SSV |
Showing 1 - 10 of 105 products
Loading...