Image
Product
Price
- SPINDLES
- 2" LOWERING SPINDLES REQUIRES 17" RIMS OR LARGER RIMS SMALLER THAN 20" WILL REQUIRE BALL JOINT TRIMMING FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 101320 IS A PAIR OF 2" LOWERING SPINDLES MADE FROM DUCTILE STEEL & E-COATED BLACK
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - GMC Sierra |
- SHOCKS
- FRONT SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, LARGE DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN FEATURES A VULCANIZED RUBBER LOWER BUSHING 15.0" EXTENDED, 9.5" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1450SL IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Ram 1500 | RWD |
- COIL SPACER
- 1.5" REAR COIL SPACERS MAY REQUIRE LONGER REAR SHOCKS DOES NOT FIT MODELS W/ AUTORIDE, MAGNERIDE OR AIR RIDE THESE SPACERS GO UNDER THE REAR COIL SPRINGS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1628 IS A PAIR OF 1.5" REAR COIL SPACERS MADE FROM BILLET ALUMINUM & ANODIZED GREY
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Cadillac Escalade |
- CONTROL ARMS
- ADDS 3 DEGREES OF CAMBER USES VULCANIZED RUBBER BUSHINGS & A FACTORY LIKE BALL JOINT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- CAMBER CORRECTION UPPER CONTROL ARMS
- MAXTRAC SUSPENSION'S PART # 352700 IS A PAIR OF FRONT UPPER CONTROL ARMS FORGED FROM ALUMINUM
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ram 1500 |
- SHOCKS
- 0"-3" FRONT ADJUSTABLE LOWERING STRUT DOES NOT FIT MODELS W/ AUTORIDE OR MAGNERIDE SETTING STRUTS AT 3" OF DROP MAY CAUSE VEHICLE TO RIDE STIFF AND NOT ALIGN PROPERLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 0"-3" ADJUSTABLE LOWERING STRUTS
- MAXTRAC SUSPENSION'S PART# 371303 IS A PAIR OF 0"-3" FRONT ADJUSTABLE LOWERING STRUTS (PAIR) BLACK W/ COIL SEAT, RETAINER CLIP & RETAINER COLLAR
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Chevrolet Suburban 2500 |
- SPINDLES
- 5" LIFT SPINDLES REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ STAMPED STEEL OR ALUMINUM CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 5" LIFT SPINDLES W/ BRAKE LINES
- MAXTRAC SUSPENSION'S PART# 701550 IS A PAIR OF 5" LIFT SPINDLES W/ EXTENDED BRAKE LINES MADE FROM DUCTILE STEEEL & E-COATED BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Chevrolet Silverado 1500 | RWD |
- SPINDLES
- 4.5 in. Lift; w/Extended Brake Lines; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware
- 4.5" LIFT SPINDLES W/ BRAKE LINES
- Axle Spindle
-
Features:
- Ductile Iron Construction
- 100 Percent Bolt On Installation
- Maintains Factory Ride Quality
- MAXTRAC SUSPENSION'S PART# 703440 IS A PAIR OF 4" LIFT SPINDLES W/ EXTENDED BRAKE LINES MADE FROM DUCTILE STEEL & E-COATED BLACK
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2011 - Ford F-150 | XLT | RWD |
- SPINDLES
- 4.5 in. Lift; w/Extended Brake Lines; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware
- 4.5" LIFT SPINDLES W/ BRAKE LINES
- Axle Spindle
-
Features:
- Ductile Iron Construction
- 100 Percent Bolt On Installation
- Maintains Factory Ride Quality
- MAXTRAC SUSPENSION'S PART# 703440 IS A PAIR OF 4" LIFT SPINDLES W/ EXTENDED BRAKE LINES MADE FROM DUCTILE STEEL & E-COATED BLACK
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2011 - Ford F-150 | Platinum | RWD |
- SHOCKS
- 0"-3" FRONT ADJUSTABLE LOWERING STRUT DOES NOT FIT REBEL MODELS OR MODELS WITH AIR RIDE SUSPENSION SETTING STRUTS AT 3" OF DROP MAY CAUSE VEHICLE TO RIDE STIFF AND NOT ALIGN PROPERLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 0"-3" ADJUSTABLE LOWERING STRUTS
- MAXTRAC SUSPENSION'S PART# 372403 IS A PAIR OF 0"-3" FRONT ADJUSTABLE LOWERING STRUTS (PAIR) BLACK W/ COIL SEAT, RETAINER CLIP & RETAINER COLLAR
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - Ram 1500 | 4WD |
- SPINDLES
- 3" LIFT SPINDLES REQUIRES 17" RIM OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING STOCK 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 32" x 11.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 3" LIFT SPINDLES W/ BRAKE LINES
- MAXTRAC SUSPENSION'S PART# 701330BL IS A PAIR OF 3" LIFT SPINDLES W/ EXTENDED BRAKE LINES CAST FROM DUCTILE STEEL AND E-COATED BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2011 - GMC Yukon | RWD |
Showing 1 - 10 of 111 products
Loading...