Image
Product
Price
- High Performance Oil Pump Screen
- Use with 8in Deep Oil Pan Bolt On Screen, May Require M-55085 Mounting Kit Screen Has 3/16 Inch To 1/4 Inch Up Or Down Adjustment
- High Performance Oil Pump Screen
- Performance
- Product Attributes:
- Tube Material: Galvanized Steel
- Gasket Or Seal Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: No
- Flanged End: Yes
- Tube Length:
- 121.00
- 4.750
- Flange Mount Hole Quantity: 2
- Tube Inside Diameter:
- 0.750
- 19.00
- Pickup Screen Maximum Adjustment:
- 0.250
- 6.00
- Tube Shape: Straight
- Screen Material: Galvanized Steel
-
Features:
- Manufactured from high quality durable materials for long wear
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
- Precision engineering protects the engine from dirt and contaminants
- Made in USA. A new Melling high performance pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed high performance oil pump pick-up tube/screen be a part of every oil pump installation when a higher quality oil pump screen is required. Melling high performance oil pump pick-up tubes/screens are manufactured with stronger welds and in some cases designed with additional reinforced mountings, include mounting bolts and are supplied with protective coatings.
This Part Fits the Following OEM/Substitute Numbers:
12559
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Chevrolet K1500 |
- High Performance Oil Pump
- 25% Higher Volume High Performance Oil Pump 10 PSI Higher Pressure Relief Spring Installed Exclusive Billet Steel Shark Tooth Helical Pump Gears Drive & Idler Shafts Extended Into Cover Includes 12550 Chrome Moly Steel Intermediate Shaft With Steel Guide Threaded Pressure Relief Nut Includes Optional Pressure Springs (-10 PSI And +10 PSI) Uses 3/4 Inch Diameter Press-Fit Or Bolt-On Pickup Tube Assembly (Not Included) Includes Oil Pump Pickup Tube Gasket, Assembly Bolts, And Wrench
- 10555ST High Performance, High Volume, High Pressure, Billet Steel Oil Pump With Gasket
- Performance
- Product Attributes:
- Oil Pump Pressure Type: High Pressure
- Additional Volume Over Stock Percentage: 25%
- Adjustable Bypass Pressure: Yes
- Alternate Pressure Springs Included: Yes
- Grade Type: Performance
- Mounting Hole Diameter:
- 0.240
- 6.00
- Anti-Cavitation: No
- Manufactured For: Gm Sbc
- Screen Information: 3/4" Bolt On/press In
- Mounting Hole Quantity: 2
- Upgrade for Pump Number: N/a
- Additional Cover Shaft Support: Yes
- Gear Material: Billet Steel
- Oil Pump Volume Type: High Volume
- Manufactured Pressure: (pink) 70 Psi
- Optional Spring Pressure 1: (yellow) 58 Psi
- Gasket Or Seal Included: Yes
- Gear Type: Shark Tooth Helical Gear
- Optional Spring Pressure 2: (green) 80 Psi
- Drive Shaft Included: Yes
- Drive Type: Drive Shaft
- Pickup Tube Diameter:
- 0.750
- 19.00
- Oil Pump Type: Gear
-
Features:
- Extended drive and idler shaft for additional support in the cover eliminating dynamic shfaft deflection at increased RPM levels.
- Features billet steel "Shark Tooth" helical gears.
- Relief hole in cover uses screw in plug instead of pressed cup plug.
- Housing and Cover are CNC machined and phosphate coated.
- Includes +10PSI higher pressure relief spring and optional -10PSI relief spring.
- Screw in plug retains relief valve spring instead of pin.
- Cover is doweled to the pump housing to assure alignment of the shaft bores.
- Includes 12550 chrome moly intermediate shaft with steel guide.
- Made in USA. Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling high performance cast iron oil pump series features a doweled housing and cover, extended drive and idler shafts for additional support at increased RPM’s, a screw in relief spring plug, CNC machined cover and housing that is manganese phosphate coated, standard volume and high volume patented billet Shark Tooth gears, and a chrome moly drive shaft with steel guide. Includes lower pressure spring and self locking socket head bolts with wrench for use with bolt on screen pumps. Every Melling high performance oil pump is individually tested for pressure and flow under actual engine operating conditions. Melling high performance Shark Tooth oil pumps are recommended for all applications where a high performance oil pump is needed.
This Part Fits the Following OEM/Substitute Numbers:
10555ST
Additional Fitment Information:
| Vehicle | Fuel Type |
|---|---|
| 1996 - Cadillac Commercial Chassis | GAS |
- Stock Replacement Rocker Arm
- Stock Replacement Rocker Arm
- Stock
- Product Attributes:
- Rocker Arm Finish: Anti-rust
- Grade Type: Standard Replacement
- Self Aligning: Yes
- Shims Included: No
- Rocker Arm Material: Cast Steel
- Mounting Type: Shaft
- Material: Cast Steel
- Rocker Arm Type: Roller
-
Features:
- Designed for long-life and maintenance free performance
- Manufactured from high quality durable materials for long wear
- Meets or exceeds original equipment specifications
- Precision engineered for optimum fit and function
- Made In USA. Melling lists rocker arms for both domestic and import applications. Depending on OEM design specifications, Melling rocker arms are provided in either stamped or cast materials. Each rocker arm is built from only the best materials and manufacturing processes available. Melling recommends installing new rocker arms and components with every engine rebuild to assure long engine life and the most efficient performance.
-
Suggested Purchase Quantity: 24
- Most jobs typically require 24 of this item.
This Part Fits the Following OEM/Substitute Numbers:
180-1333, 3F1Z-6564-AA, AJ03-12-130A, F5RZ-6564-A, GY01-12-130, MR-950, R-1141, R-9113
Additional Fitment Information:
| Vehicle | Cylinder Head Type | Engine VIN |
|---|---|---|
| 1996 - Mercury Sable | DOHC | S |
- Stock Replacement Push Rod
- Stock Replacement Push Rod
- Stock
- Product Attributes:
- Grade Type: Standard Replacement
- Drilled: Yes
- Top Tip Diameter:
- 0.312
- 8.0
- Top Tip Type: Rounded End
- Bottom Tip Diameter:
- 0.312
- 8.0
- Bottom Tip Type: Rounded End
- Material: Welded Steel
-
Features:
- Meets or exceeds original equipment specifications
- Manufactured from high quality materials for consistent durable wear
- Designed for long-life and worry-free performance
- Precision engineered for optimum fit and function
- Made In USA. Melling offers a broad selection of push rods for both standard and performance engine applications. Melling push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes. Melling recommends always installing new push rods to assure proper valve train geometry and performance. In addition to OEM push rod applications, Melling select offers chrome molly push rods for high performance applications.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This Part Fits the Following OEM/Substitute Numbers:
190-1525, 48221, 53006722, 74-6458, 74-6462, MPR-462, PR-1508, PR-462, RP-3317, RP-3333
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Dodge Ram 1500 Van |
- Stock Replacement Push Rod
- Stock Replacement Push Rod
- Stock
- Product Attributes:
- Grade Type: Standard Replacement
- Drilled: Yes
- Top Tip Diameter:
- 0.312
- 8.0
- Top Tip Type: Rounded End
- Bottom Tip Diameter:
- 0.312
- 8.0
- Bottom Tip Type: Rounded End
- Material: Welded Steel
-
Features:
- Meets or exceeds original equipment specifications
- Manufactured from high quality materials for consistent durable wear
- Designed for long-life and worry-free performance
- Precision engineered for optimum fit and function
- Made In USA. Melling offers a broad selection of push rods for both standard and performance engine applications. Melling push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes. Melling recommends always installing new push rods to assure proper valve train geometry and performance. In addition to OEM push rod applications, Melling select offers chrome molly push rods for high performance applications.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Dodge Ram 1500 |
Showing 1 - 5 of 5 products
Loading...