Image
Product
Price
- Subaru WRX Silicone Ancillary Hose Kit, Black, 2015-2021
- Silicone Ancillary Hose Kit, fits Subaru WRX 2015-2021
- Product Attributes:
- SellingPoint04: Improves Longevity And Reliability
- SellingPoint05: Includes Silicone Replacement Hoses For Pcv And Coolant Lines
- SellingPoint06: Includes A Total Of 12 Hoses And Is Available In Black, Blue, Or Red
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Direct Fit For The 2015-2021 Subaru Wrx
- TechSpec Maximum Temperature Rating: 330
- SellingPoint02: Constructed From Four Layers Of Silicone With Heat-resistant Embedded Fibers
- SellingPoint03: Improves Tolerance To Heat, Pressure, And Oil Degradation Compared To Stock Rubber Components
- TechSpec Length (Inches): N/a
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outer Diameter (in): N/a
- SellingPoint10: N/a
- OptionLabel: Black
- TechSpec Note: N/a
- SellingPoint15: N/a
- TechSpec Inner Diameter (in): N/a
- Install Difficulty: 4
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Purchase Includes: (12) Silicone Hoses--(2) Worm-gear Clamps--(2) Zip Tie Tree Clips--mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Material: Silicone
- TechSpec Applications: N/a
- TechSpec Coupler Style: N/a
- TechSpec Interior Material: N/a
-
Features:
- Direct fit for the 2015-2021 Subaru WRX
- Constructed from four layers of silicone with heat-resistant embedded fibers
- Improves tolerance to heat, pressure, and oil degradation compared to stock rubber components
- Improves longevity and reliability
- Includes silicone replacement hoses for PCV and coolant lines
- Includes a total of 12 hoses and is available in black, blue, or red
- Mishimoto Lifetime Warranty
- The Mishimoto silicone Ancillary Hose Kit for the 2015+ Subaru WRX is designed to improve the reliability of your vehicle and eliminate weak points found with the factory rubber hoses. We have carefully selected 13 hoses, both PCV and coolant lines, which we found can easily be replaced and benefit from the use of silicone. Mishimoto silicone hoses are crafted from four layers of silicone with heat-resistant embedded fibers to provide improved pressure and heat tolerance. PCV lines are commonly exposed to fine particles of oil which, over time, degrade the rubber and lead to eventual failure. Mishimoto silicone hoses have substantially greater resilience to these particles, providing a hose that will endure the test of time. Each hose included in this kit is designed with factory specifications in mind, resulting in a direct-fit replacement that is easy to install. This kit is available in black, blue, and red and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2020 - Subaru WRX | Sport |
- X-Line Performance Aluminum Radiator, fits 08-14 Subaru WRX / 08-21 STI
- X-Line Performance Aluminum Radiator, fits Subaru WRX 2008-2014/Subaru STI 2008-2021
- Product Attributes:
- SellingPoint04: Greater Density Of Rows For Higher Cooling Capacity.
- SellingPoint05: More Contact Points For Additional Heat Transfer.
- SellingPoint06: 3-row Design Creates More Air Turbulence, Maximizing Cooling Efficiency
- SellingPoint07: Includes Magnetic Drain Plug
- SellingPoint01: Direct Fit For The 2008-2014 Subaru Wrx/sti
- SellingPoint02: Premium Radiator Has 3-row (2-in Thick) Core For Improved Strength And Reliability.
- TechSpec Overall Length (in): 21.8
- SellingPoint03: 16-percent Thinner-than-stock Tubes Allow For More Surface Contact, Increasing Cooling Efficiency.
- TechSpec Chassis Codes: Ge--gh
- SellingPoint08: Includes A High-pressure 1.3 Bar
- SellingPoint09: Mishimoto Radiator Cap
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 27.09
- TechSpec Core Thickness (in): 2
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: This Item Is For Manual Transmission Vehicles. For Automatic Applications, Please Purchase Optional Mishimoto Universal Transmission Cooler Kit.----caution:--the Provided Mishimoto Radiator Cap Should Replace The Stock Cap Located On The Expansion Tank. T
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Ej255--ej257
- TechSpec Overall Width (ins): 2.5
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 13.39
- TechSpec Overall Height (in): 28
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Material: N/a
- TechSpec Applications: 2008-2014 Subaru Wrx--2008-2019 Subaru Sti--2009-2013 Subaru Forester Xt--2005-2009 Subaru Outback Xt--2005-2009 Subaru Legacy Gt
- TechSpec Includes: Mishimoto Radiator--mishimoto Radiator Cap--overflow Nipples - 2--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 3
- TechSpec DPI: 13091/13093
- TechSpec Fluid Capacity (gal): N/a
- TechSpec Inlet (in): 1.54
- TechSpec Outlet (in): 1.54
-
Features:
- Direct fit for the 2008-2014 Subaru WRX/2008-2021 Subaru STI
- Premium radiator has 3-row (2" thick) core for improved strength and reliability.
- 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.
- Greater density of rows for higher cooling capacity.
- More contact points for additional heat transfer.
- 3-row design creates more air turbulence, maximizing cooling efficiency
- Includes magnetic drain plug
- Includes a high-pressure 1.3 bar
- Mishimoto radiator cap
- Mishimoto Lifetime Warranty
- The Mishimoto X Line performance aluminum radiator for the 2008-2014 Subaru WRX/STI is designed with a larger 3 row core to maximize cooling efficiency, boost engine functions, and most importantly protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator whether you drive your vehicle daily or take it for track runs. The Mishimoto aluminum 2008-2014 Subaru WRX/STI radiator features a lightweight triple core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct OEM fit making installation effortless with no cutting or modification required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty including accident protection.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Subaru WRX STI | H | 2458 | GAS | 4 Cyl 2.5L | - |
- X-Line Performance Aluminum Radiator, fits 08-14 Subaru WRX / 08-21 STI
- X-Line Performance Aluminum Radiator, fits Subaru WRX 2008-2014/Subaru STI 2008-2021
- Product Attributes:
- SellingPoint04: Greater Density Of Rows For Higher Cooling Capacity.
- SellingPoint05: More Contact Points For Additional Heat Transfer.
- SellingPoint06: 3-row Design Creates More Air Turbulence, Maximizing Cooling Efficiency
- SellingPoint07: Includes Magnetic Drain Plug
- SellingPoint01: Direct Fit For The 2008-2014 Subaru Wrx/sti
- SellingPoint02: Premium Radiator Has 3-row (2-in Thick) Core For Improved Strength And Reliability.
- TechSpec Overall Length (in): 21.8
- SellingPoint03: 16-percent Thinner-than-stock Tubes Allow For More Surface Contact, Increasing Cooling Efficiency.
- TechSpec Chassis Codes: Ge--gh
- SellingPoint08: Includes A High-pressure 1.3 Bar
- SellingPoint09: Mishimoto Radiator Cap
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 27.09
- TechSpec Core Thickness (in): 2
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: This Item Is For Manual Transmission Vehicles. For Automatic Applications, Please Purchase Optional Mishimoto Universal Transmission Cooler Kit.----caution:--the Provided Mishimoto Radiator Cap Should Replace The Stock Cap Located On The Expansion Tank. T
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Ej255--ej257
- TechSpec Overall Width (ins): 2.5
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 13.39
- TechSpec Overall Height (in): 28
- TechSpec Material: N/a
- TechSpec Applications: 2008-2014 Subaru Wrx--2008-2019 Subaru Sti--2009-2013 Subaru Forester Xt--2005-2009 Subaru Outback Xt--2005-2009 Subaru Legacy Gt
- TechSpec Includes: Mishimoto Radiator--mishimoto Radiator Cap--overflow Nipples - 2--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 3
- TechSpec DPI: 13091/13093
- TechSpec Fluid Capacity (gal): N/a
- TechSpec Inlet (in): 1.54
- TechSpec Outlet (in): 1.54
-
Features:
- Direct fit for the 2008-2014 Subaru WRX/2008-2021 Subaru STI
- Premium radiator has 3-row (2" thick) core for improved strength and reliability.
- 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.
- Greater density of rows for higher cooling capacity.
- More contact points for additional heat transfer.
- 3-row design creates more air turbulence, maximizing cooling efficiency
- Includes magnetic drain plug
- Includes a high-pressure 1.3 bar
- Mishimoto radiator cap
- Mishimoto Lifetime Warranty
- The Mishimoto X Line performance aluminum radiator for the 2008-2014 Subaru WRX/STI is designed with a larger 3 row core to maximize cooling efficiency, boost engine functions, and most importantly protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator whether you drive your vehicle daily or take it for track runs. The Mishimoto aluminum 2008-2014 Subaru WRX/STI radiator features a lightweight triple core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct OEM fit making installation effortless with no cutting or modification required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty including accident protection.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2020 - Subaru WRX STI | STI |
- Performance Aluminum Radiator, fits 2008-2014 Subaru WRX / 2008-2021 STI
- Performance Aluminum Radiator, fits Subaru WRX 2008-2014/Subaru STI 2008-2021
- Product Attributes:
- SellingPoint04: Increased Fluid Capacity And Optimal Heat Dissipation
- SellingPoint05: Provides Efficient Temperature Reduction For Use On The Street, Track, Rallycross, Or Autocross Course
- SellingPoint06: Includes 1.3 Bar High-pressure Radiator Cap Which Effectively Raises The Boiling Point Of Engine Coolant, Providing A Safer And More Efficient System
- SellingPoint07: Includes Magnetic Drain Plug To Capture Any Metallic Debris/fragments In Your Cooling System
- SellingPoint01: Direct Fit For The 2008-2019 Subaru Wrx/sti
- SellingPoint02: Full Aluminum Construction Including Durable, Tig-welded End Tanks
- TechSpec Overall Length (in): 28
- SellingPoint03: Features A Two-row, 1.65-in Thick, Efficient Brazed Aluminum Core
- TechSpec Chassis Codes: Ge--gh
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 13.39
- TechSpec Core Thickness (in): 1.65
- Installation Difficulty: 3
- SellingPoint10: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Ej255--ej257
- TechSpec Overall Width (ins): 2.15
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 27.08
- TechSpec Overall Height (in): 21.8
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Material: N/a
- TechSpec Applications: 2008-2014 Subaru Wrx--2008-2019 Subaru Sti--2009-2013 Subaru Forester Xt--2005-2009 Subaru Outback Xt--2005-2009 Subaru Legacy Gt
- TechSpec Includes: Mishimoto Radiator--mishimoto Radiator Cap--overflow Nipples - 2--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 2
- TechSpec DPI: 13091/13093
- TechSpec Fluid Capacity (gal): 2.21
- TechSpec Inlet (in): 1.54
- TechSpec Outlet (in): 1.54
-
Features:
- Direct fit for the 2008-2014 Subaru WRX/STI
- Premium radiator has 3-row (2" thick) core for improved strength and reliability.
- 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.
- Greater density of rows for higher cooling capacity.
- More contact points for additional heat transfer.
- 3-row design creates more air turbulence, maximizing cooling efficiency
- Includes magnetic drain plug
- Includes a high-pressure 1.3 bar
- Mishimoto radiator cap
- Mishimoto Lifetime Warranty
- The Mishimoto performance aluminum radiator for the 2008-2014 Subaru WRX/STI is designed and engineered to maximize cooling efficiency by up to 30-percent, boost engine functions, and most importantly protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator whether you drive your vehicle daily or take it for track runs. The Mishimoto 2008-2014 Subaru WRX/STI radiator features a lightweight dual core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct OEM fit making installation effortless with no cutting or modification required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty including accident protection.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Subaru WRX STI | H | 2458 | GAS | 4 Cyl 2.5L | - |
- Subaru WRX Silicone Ancillary Hose Kit, Black, 2015-2021
- Silicone Ancillary Hose Kit, fits Subaru WRX 2015-2021
- Product Attributes:
- SellingPoint04: Improves Longevity And Reliability
- SellingPoint05: Includes Silicone Replacement Hoses For Pcv And Coolant Lines
- SellingPoint06: Includes A Total Of 12 Hoses And Is Available In Black, Blue, Or Red
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Direct Fit For The 2015-2021 Subaru Wrx
- TechSpec Maximum Temperature Rating: 330
- SellingPoint02: Constructed From Four Layers Of Silicone With Heat-resistant Embedded Fibers
- SellingPoint03: Improves Tolerance To Heat, Pressure, And Oil Degradation Compared To Stock Rubber Components
- TechSpec Length (Inches): N/a
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- Installation Difficulty: 4
- TechSpec Outer Diameter (in): N/a
- SellingPoint10: N/a
- OptionLabel: Black
- TechSpec Note: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- TechSpec Inner Diameter (in): N/a
- Install Difficulty: 4
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Purchase Includes: (12) Silicone Hoses--(2) Worm-gear Clamps--(2) Zip Tie Tree Clips--mishimoto Lifetime Warranty
- SellingPoint14: N/a
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Material: Silicone
- TechSpec Applications: N/a
- TechSpec Coupler Style: N/a
- TechSpec Interior Material: N/a
-
Features:
- Direct fit for the 2015-2021 Subaru WRX
- Constructed from four layers of silicone with heat-resistant embedded fibers
- Improves tolerance to heat, pressure, and oil degradation compared to stock rubber components
- Improves longevity and reliability
- Includes silicone replacement hoses for PCV and coolant lines
- Includes a total of 12 hoses and is available in black, blue, or red
- Mishimoto Lifetime Warranty
- The Mishimoto silicone Ancillary Hose Kit for the 2015+ Subaru WRX is designed to improve the reliability of your vehicle and eliminate weak points found with the factory rubber hoses. We have carefully selected 13 hoses, both PCV and coolant lines, which we found can easily be replaced and benefit from the use of silicone. Mishimoto silicone hoses are crafted from four layers of silicone with heat-resistant embedded fibers to provide improved pressure and heat tolerance. PCV lines are commonly exposed to fine particles of oil which, over time, degrade the rubber and lead to eventual failure. Mishimoto silicone hoses have substantially greater resilience to these particles, providing a hose that will endure the test of time. Each hose included in this kit is designed with factory specifications in mind, resulting in a direct-fit replacement that is easy to install. This kit is available in black, blue, and red and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Subaru WRX | H | 1998 | GAS | 4 Cyl 2.0L | 122 |
- Performance Aluminum Radiator, fits 2008-2014 Subaru WRX / 2008-2021 STI
- Performance Aluminum Radiator, fits Subaru WRX 2008-2014/Subaru STI 2008-2021
- Product Attributes:
- SellingPoint04: Increased Fluid Capacity And Optimal Heat Dissipation
- SellingPoint05: Provides Efficient Temperature Reduction For Use On The Street, Track, Rallycross, Or Autocross Course
- SellingPoint06: Includes 1.3 Bar High-pressure Radiator Cap Which Effectively Raises The Boiling Point Of Engine Coolant, Providing A Safer And More Efficient System
- SellingPoint07: Includes Magnetic Drain Plug To Capture Any Metallic Debris/fragments In Your Cooling System
- SellingPoint01: Direct Fit For The 2008-2019 Subaru Wrx/sti
- SellingPoint02: Full Aluminum Construction Including Durable, Tig-welded End Tanks
- TechSpec Overall Length (in): 28
- SellingPoint03: Features A Two-row, 1.65-in Thick, Efficient Brazed Aluminum Core
- TechSpec Chassis Codes: Ge--gh
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 13.39
- TechSpec Core Thickness (in): 1.65
- SellingPoint10: N/a
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Ej255--ej257
- TechSpec Overall Width (ins): 2.15
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 27.08
- TechSpec Overall Height (in): 21.8
- TechSpec Material: N/a
- TechSpec Applications: 2008-2014 Subaru Wrx--2008-2019 Subaru Sti--2009-2013 Subaru Forester Xt--2005-2009 Subaru Outback Xt--2005-2009 Subaru Legacy Gt
- TechSpec Includes: Mishimoto Radiator--mishimoto Radiator Cap--overflow Nipples - 2--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 2
- TechSpec DPI: 13091/13093
- TechSpec Fluid Capacity (gal): 2.21
- TechSpec Inlet (in): 1.54
- TechSpec Outlet (in): 1.54
-
Features:
- Direct fit for the 2008-2014 Subaru WRX/STI
- Premium radiator has 3-row (2" thick) core for improved strength and reliability.
- 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.
- Greater density of rows for higher cooling capacity.
- More contact points for additional heat transfer.
- 3-row design creates more air turbulence, maximizing cooling efficiency
- Includes magnetic drain plug
- Includes a high-pressure 1.3 bar
- Mishimoto radiator cap
- Mishimoto Lifetime Warranty
- The Mishimoto performance aluminum radiator for the 2008-2014 Subaru WRX/STI is designed and engineered to maximize cooling efficiency by up to 30-percent, boost engine functions, and most importantly protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator whether you drive your vehicle daily or take it for track runs. The Mishimoto 2008-2014 Subaru WRX/STI radiator features a lightweight dual core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct OEM fit making installation effortless with no cutting or modification required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty including accident protection.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2020 - Subaru WRX STI | Sport-tech |
- Performance Charge Pipe Kit, fits Subaru WRX 2022+, Black
- Performance Charge Pipe Kit, fits Subaru WRX 2022+, Black
- Product Attributes:
- SellingPoint04: Integrated Turbo Quick Disconnect Eliminates Leak Points For Improved Reliability
- TechSpec Pipe Shape: N/a
- SellingPoint05: All-aluminum Tig-welded Construction For Maximum Durability And Flow
- SellingPoint06: Available In Micro-wrinkle Black Or Wrinkle Red To Fit Any Color Scheme
- SellingPoint07: Includes Black Silicone Coupler And High-quality Worm Gear Clamps For A Secure Connection
- SellingPoint01: Direct Fit For 2022+ Subaru Wrx
- SellingPoint02: Reduces Restriction By 20 Percent Over Stock For Improved Power Potential
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 21.55
- SellingPoint03: Cnc-machined Quick Disconnect With Included O-ring Ensures Leak-free Running
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: Vb
- TechSpec Pipe Length: 21.74
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Core Type: N/a
- TechSpec Core Height (in): N/a
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: 2.75
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Fa24f
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): 9.22
- TechSpec Applications: Subaru Wrx I4 2.4l Turbo 2022+
- TechSpec Includes: (1) Hot-side Intercooler Pipe—(1) Silicone Coupler-- (2) Stainless Steel Worm Gear Clamps-- (1) Assembly Guide Notecard—mishimoto Lifetime Warranty
- TechSpec Weight (lbs): 4
- TechSpec Inlet (in): 2.5
- TechSpec Overall Width (in): 4.26
- TechSpec Outlet (in): 2.75
- Prepare to unleash the beast that is your 2022+ Subaru WRX. Its raw power and unrivaled performance are the stuff of automotive legends. However, lurking beneath the surface lies an unfortunate reality: the restrictive stock charge pipe. It's time to set your WRX free and unlock its full might with the Mishimoto 2022+ Subaru WRX performance charge pipe kit.----This pipe kit is meticulously engineered from high-quality aluminum with a sleek, unobstructed interior for a 21 percent reduction in airflow restriction. Unlike the stock plastic pipe, this Mishimoto charge pipe is built to withstand high boost pressures over-and-over without failure. Our robust silicone coupler and integrated CNC-machined quick disconnect with included O-ring ensure leak-free running, even with more boost than stock.----Available in micro-wrinkle black and wrinkle red powder coat, this aluminum charge pipe not only optimizes airflow but also adds a captivating visual touch under the hood. The Mishimoto 2022+ Subaru WRX intercooler pipe kit includes everything you need for a hassle-free installation, so you can get back to conquering the road in no time. With the Mishimoto Lifetime Warranty, rest easy knowing that Mishimoto has your back for the long haul.
This Part Fits the Following OEM/Substitute Numbers:
14459AA781, 14459AA800, 14460AA380
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2020 - Subaru Ascent | H | 2387 | 4 Cyl 2.4L | Premium | Turbocharged | 146 |
Showing 1 - 7 of 7 products
Loading...