Image
Product
Price
- 2015+ Ford F-150 EcoBoost Intercooler
- Intercooler, fits Ford F-150 EcoBoost 2015+
- Product Attributes:
- SellingPoint04: 163-percent Increase In External Fin Surface Area
- TechSpec Pipe Shape: N/a
- SellingPoint05: Cnc-machined Inlets And Outlets Are Ridged For Greater Holding Power
- SellingPoint06: All-aluminum, Tig-welded Construction
- SellingPoint07: Internal Fin Design For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint01: Direct Fit For The 2015+ Ford F-150 Ecoboost
- SellingPoint02: 10f (5.5c) Reduction In Intake Air Temp
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 29
- SellingPoint03: 77-percent Increase In Internal Core Volume
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Fits With Stock And Mishimoto 2.7l And 3.5l Intercooler Pipe Kits
- SellingPoint09: Fits With Stock Intercooler Fans Without Modification
- CARB EO Number: D-759-6
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 9.4
- TechSpec Maximum Recommended Boost Pressure (PSI): 50
- TechSpec Core Thickness (in): 4.72
- TechSpec Pipe Diameter: N/a
- OptionLabel: Sleek Silver
- SellingPoint10: Available In Sleek Silver Or Stealth Black
- TechSpec Note: N/a
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: 2.7l V6 Ecoboost--3.5l V6 Ecoboost
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 19.6
- TechSpec Overall Height (in): 9.5
- TechSpec Applications: 2015+ Ford F-150 Ecoboost--2017+ Ford Raptor 3.5l V6 Ecoboost--2018+ Ford Expedition 3.5l V6 Ecoboost--2018+ Lincoln Navigator 3.5l V6 Ecoboost
- TechSpec Includes: (1) Mishimoto Intercooler W/ Assembled Rubber Trim--(1) Bypass Valve Bracket--mounting Hardware--bypass Valve Hardware--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 2.5
- TechSpec Overall Width (in): 7
- TechSpec Outlet (in): 3
-
Features:
- 77-percent increase in internal core volume
- 163-percent increase in external fin surface area
- Mishimoto Lifetime Warranty
- Direct fit for the 2015+ Ford F-150 EcoBoost
- 10 F (5.5 C) reduction in intake air temp
- Keep those air intake temps down! With Mishimoto's Performance Intercooler for the 2015+ Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77-percent over stock and external fin surface area by 163-percent. We put our core through some grueling tests to see how our design can alleviate the effects of heat soak. With temperature drops averaging 10 degrees under the stock numbers, your F-150 will take in cooler air, providing better performance and increased tuning potential.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Lincoln Navigator | V | 3496 | 6 Cyl 3.5L | Base | 213 |
- Mishimoto Skid Plate, Fits BMW G8X M2/M3/M4 2021+
- Mishimoto Skid Plate, Fits BMW G8X M2/M3/M4 2021+
- Product Attributes:
- SellingPoint04: Retains Air Dam For Optimized Pressure Differential And Airflow Through Oil Cooler Core
- SellingPoint05: Protective Crosscuts Allow Ample Airflow While Blocking Debris
- TechSpec Overall Height (Inches): 24
- SellingPoint06: Installs In Under An Hour With No Drilling Or Cutting Required
- SellingPoint07: Includes Everything Needed For Installation
- SellingPoint01: Direct Fit For 2021+ Bmw G8x M2/m3/m4
- SellingPoint02: Protects Engine And Oil Cooler From Damage
- SellingPoint03: Constructed From High-strength Aluminum And Powdercoated For A Durable, Corrosion-resistant Finish
- TechSpec Length (Inches): 35.8
- TechSpec Minimum Yield Strength: N/a
- TechSpec Chassis Codes: G80--g82--g83--g87
- SellingPoint08: Fits Both Stock And Mishimoto Oil Coolers
- SellingPoint09: Recessed Mounting Hardware Provides Smooth Surface To Avoid Snagging On Obstacles Or Shearing Mounting Bolts
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Fitment With Competition Sport (cs) Models May Require Enlarging Holes In The Front Splitter
- TechSpec Installation Notes: N/a
- TechSpec Thread Size: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: 5052-aluminum
- TechSpec Diameter (Inches): N/a
- TechSpec Applications: Bmw M3 I6 3.0l Twin-turbo 2021+--bmw M3 Competition I6 3.0l Twin-turbo 2021+--bmw M3 Competition Sport I6 3.0l Twin-turbo 2023+--bmw M4 I6 3.0l Twin-turbo 2021+--bmw M4 Competition I6 3.0l Twin-turbo 2021+--bmw M2 I6 3.0l Twin-turbo 2023+
- TechSpec Includes: (1) Mishimoto Aluminum Skidplate--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): N/a
-
Features:
- Direct fit for 2021+ BMW G8X M2/M3/M4
- Protects engine and oil cooler from damage
- Constructed from high-strength aluminum and powder coated for a durable, corrosion-resistant finish
- Retains air dam for optimized pressure differential and airflow through oil cooler core
- Protective crosscuts allow ample airflow while blocking debris
- Installs in under an hour with no drilling or cutting required
- Includes everything needed for installation
- Fits both stock and Mishimoto oil coolers
- Recessed mounting hardware provides smooth surface to avoid snagging on obstacles or shearing mounting bolts
- Mishimoto Lifetime Warranty
- The engineers at BMW did an excellent job striking a balance between exceptional power and cooling in the latest generation of BMW G8X M2, M3, and M4 models. Unfortunately, this meant positioning components, namely the oil cooler, in precarious positions. Placed on the undercarriage and parallel to the road’s surface, the G8X oil cooler is vulnerable to bumps, scrapes, debris, and other road hazards.--The engineers at Mishimoto recognized this shortcoming while developing the Mishimoto 2021+ BMW G8X M2, M3, and M4 performance oil cooler, and in true Mishimoto fashion, pushed the limits to construct the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate. This skid plate is constructed from high-strength aluminum and features a cross-cut design to protect your stock or Mishimoto performance oil cooler while still allowing ample airflow. It includes a corrosion-resistant black powder-coated finish and everything required for a smooth and simple installation – no cutting or modifications necessary!--As with all our products, the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate comes with our signature Mishimoto Lifetime Warranty for a lifetime of protection.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - BMW M4 | L | 2993 | 6 Cyl 3.0L | Competition xDrive | - |
- Direct-Fit Catch Can, PCV Side, Fits Ford F150 2.7L/3.5L EcoBoost/5.0L 2011+
- Direct-Fit Catch Can, PCV Side, Fits Ford F150 2.7L/3.5L EcoBoost/5.0L 2011+
- Product Attributes:
- SellingPoint04: Helps Reduce Carbon Buildup On Intake Valves
- SellingPoint05: Protects Intake System And Essential Engine Components By Capturing Oil Blow-by In The Pcv System
- SellingPoint06: Application-specific Pre-molded Hoses Fit With Stock Engine Cover
- SellingPoint07: Includes Factory-style Quick-disconnect Fittings For Easy And Secure Installation
- SellingPoint01: Direct Fit For 2011+ Ford F-150 2.7l/3.5l Ecoboost And 5.0l
- SellingPoint02: Anodized Billet 6061 Aluminum Construction
- SellingPoint03: Robust 3mm-thick Steel Bracket Ensures A Sturdy Mounting Point In A Serviceable Location
- TechSpec Chassis Codes: N/a
- SellingPoint08: Helps Maintain Proper Octane Levels To Reduce Potential Detonation
- SellingPoint09: Internal Air Diverter Increases Air Turbulence To Improve Oil Separation
- TechSpec Drain Plug Thread Size: N/a
- TechSpec Outlet: N/a
- TechSpec Catch Can Diameter (in): N/a
- SellingPoint10: Simple And Quick Installation With Basic Hand Tools
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: Filter And Can Are Fully Serviceable
- SellingPoint12: Mishimoto Lifetime Warranty
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- TechSpec Material: N/a
- TechSpec Applications: N/a
- TechSpec Includes: N/a
- TechSpec Inlet: N/a
-
Features:
- Direct fit for 2011+ Ford F-150 2.7L/3.5L EcoBoost & 5.0L
- Anodized billet 6061 aluminum construction
- Robust 3mm-thick steel bracket ensures a sturdy mounting point in a serviceable location
- Helps reduce carbon buildup on intake valves
- Protects intake system and essential engine components by capturing oil blow-by in the PCV system
- Application-specific pre-molded hoses fit with stock engine cover
- Includes factory-style quick-disconnect fittings for easy and secure installation
- Helps maintain proper octane levels to reduce potential detonation
- Internal air diverter increases air turbulence to improve oil separation
- Simple and quick installation with basic hand tools
- Filter and can are fully serviceable
- Mishimoto Lifetime Warranty
- Carbon buildup is an enemy of any motor, and the Mishimoto Direct-Fit Oil Catch Can system for your 2011+ Ford F-150 is the defense. Modern vehicles use a PCV, or “Positive Crankcase Ventilation", system to capture the vapors that escape past the piston rings into the crankcase of your engine and recirculate them back into the intake system to be burned again. While this is much better for the environment, it’s not as great for your engine. In doing so, these vapors carry remnants of oil and unburned fuel, which make their way into your intake system, causing multiple problems. The first and largest problem is that the oil particles being carried in these vapors coat your intake system, including the intake manifold and intake valves. Over time, this will gum up and turn into carbon buildup. Direct-injection engines, like the EcoBoost, are especially prone to severe carbon buildup on the intake valves. The second issue is that those oily vapors being introduced back into the cylinder during combustion can reduce the overall octane rating of the fresh fuel being provided, causing pre-detonation and knocking. This is where the Mishimoto Direct-Fit Oil Catch Can system comes into play. By installing our catch can in line with your PCV system, the 50-micron bronze filter captures those oily particles and allows them to condense until they become heavy enough to drip into the canister to be collected instead of flowing back into your engine. This leaves the air flowing back into your intake system clean and ready to be burned again. The catch can mounts with a sturdy 3-mm thick steel bracket in a convenient and serviceable location, allowing you to easily empty the waste oil. The pre-molded hoses with factory style quick-disconnects make installation a breeze, and even fit with the factory engine cover. As with all our products, this catch can is backed by our signature Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ford F-150 | V | 4951 | 8 Cyl 5.0L | 302 |
- License Plate Relocation Kit, Ford F-150 2015+
- License Plate Relocation Kit, fits Ford F-150 2015+
- Product Attributes:
- SellingPoint04: Powder Coated Finish Provides Resistance Against Corrosion
- SellingPoint05: Includes High Quality Hardware For An Easy Installation
- TechSpec Overall Height (Inches): N/a
- SellingPoint06: Mishimoto Lifetime Warranty
- SellingPoint07: N/a
- SellingPoint01: Direct Fit For 2015+ Ford F-150
- SellingPoint02: Relocates License Plate, Ensuring Proper Airflow To Intercooler Air Duct
- SellingPoint03: Constructed From 4mm-thick Powder Coated Steel For Optimal Strength And Rigidity
- TechSpec Length (Inches): N/a
- TechSpec Minimum Yield Strength: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- TechSpec Thread Size: N/a
- SellingPoint15: N/a
- Install Difficulty: 1
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: Steel
- TechSpec Diameter (Inches): N/a
- TechSpec Applications: Ford F-150 V6 (2.7) 2015-2022--ford F-150 V6 (3.0) 2018-2022--ford F-150 V6 (3.3) 2018-2022--ford F-150 V6 (3.5) 2015-2022--ford F-150 V8 (5.0) 2018-2020--ford Raptor V6 (3.5) 2017-2022
- TechSpec Includes: (1) License Plate Bracket--(1) Mounting Plate--hardware Kit--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): N/a
-
Features:
- Direct fit for 2015+ Ford F-150
- Relocates license plate, ensuring proper airflow to intercooler air duct
- Constructed from 4mm-thick powder coated steel for optimal strength and rigidity
- Powder coated finish provides resistance against corrosion
- Includes high quality hardware for an easy installation
- Mishimoto Lifetime Warranty
- Auto manufacturers have a way for placing license plates in the most unusual locations, often ruining vehicle aesthetics and in some instances, impacting vehicle performance. For the EcoBoost F-150, the stock location for the license plate blocks vital airflow passing through the intercooler. Moving the license plate utilizing our License Plate Relocation Kit allows fresh airflow to pass through the intercooler, ensuring optimal performance from your twin-turbo powerplant. Our bracket is constructed from 4mm-thick steel, ensuring high strength and rigidity. To provide resistance against corrosion, our bracket is powder coated in a durable semi-gloss black finish. Our License Plate Relocation Kit includes all necessary hardware for an easy installation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Ford F-150 Lightning |
- License Plate Relocation Kit, Fits Subaru WRX 2022+
- License Plate Relocation Kit, Fits Subaru WRX 2022+
- Product Attributes:
- SellingPoint04: Mounts To Oem Front Tow Hook With No Permanent Modifications Required
- SellingPoint05: Includes All Necessary Hardware For Installation Including Stainless-steel License Plate Screws
- TechSpec Overall Height (Inches): 5.49
- SellingPoint06: Fabricated From High-strength 6061 Aluminum
- SellingPoint07: Angled To Follow Contours Of The Bumper And Reduce Wind Resistance
- SellingPoint01: Direct Fit For 2022+ Subaru Wrx
- SellingPoint02: Installs In Under 15 Minutes
- SellingPoint03: Avoids The Need To Drill Holes In Your Front Bumper
- TechSpec Length (Inches): 7.87
- TechSpec Minimum Yield Strength: N/a
- SellingPoint08: Anodized Black Shaft And Powdercoated Black Plate Bracket For A Durable, Corrosion-resistant Finish
- SellingPoint09: Allows Full Airflow To Radiator And Fmic
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: N/a
- TechSpec Installation Notes: 19.91 Lb-ft
- TechSpec Thread Size: M16 X 1.5
- SellingPoint15: N/a
- Install Difficulty: 1
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Fa24
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: 6061 Aluminum
- TechSpec Diameter (Inches): 0.75
- TechSpec Applications: 2022+ Subaru Wrx
- TechSpec Includes: (1) License Plate Mounting Bracket--(1) Front Tow Hook Mounting Shaft--all Required Hardware For Installation & Mounting License Plate--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): 0.68
-
Features:
- Mounts to OEM front tow hook with no permanent modifications required
- Includes all necessary hardware for installation including stainless-steel license plate screws
- Fabricated from high-strength 6061 aluminum
- Angled to follow contours of the bumper and reduce wind resistance
- Anodized black shaft and powdercoated black plate bracket for a durable, corrosion-resistant finish
- Allows full airflow to radiator and FMIC
- Mishimoto Lifetime Warranty
- Direct fit for 2022+ Subaru WRX
- Installs in under 15 minutes
- Avoids the need to drill holes in your front bumper
- Front license plates are a drag, literally. In the case of the 2022+ Subaru WRX, the front license plate installs directly in the center of the front bumper, partially blocking the lower grill. It creates wind resistance, blocks critical airflow to your radiator, forces you to drill holes in your front bumper, and just doesn’t look nice. With the Mishimoto License Plate Relocation Kit, we solve all these problems. Designed specifically for the 2022+ Subaru WRX, our License Plate Relocation Kit is fabricated from high-strength, anodized and powdercoated 6061 aluminum. Mounting to the OEM tow hook location allows for a direct fit while hugging the contours of your bumper for a clean, seamless installation. Additionally, moving the plate to the side and angling to follow the body lines helps reduce wind resistance and free up space in the center to allow critical airflow to reach your radiator. And let’s be honest, it just looks better! The days of ugly holes in your bumper are over. Our License Plate Relocation Kit includes all necessary hardware for an easy installation, and as with all our products, this kit includes our signature Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2023 - Subaru WRX | H | 2387 | 4 Cyl 2.4L | Premium | Sedan | 146 |
- Aluminum Expansion Tank, Fits 2019+ Ford Ranger, Natural
- Aluminum Expansion Tank, Fits 2019+ Ford Ranger 2.3L EcoBoost, Natural
- Product Attributes:
- SellingPoint04: Internal Baffles Keep Coolant Near Overflow Port During Aggressive Driving, Preventing Air Entry Into Coolant System
- SellingPoint05: Fill Neck Accepts Stock Cap For Easy Maintenance
- SellingPoint06: Available In Polished Or Micro-wrinkle Black Powder Coated Finish To Suit Any Style
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Direct Fit For 2019+ Ford Ranger 2.3l Ecoboost
- SellingPoint02: Full-aluminum Construction With Durable Precision Tig-welds
- SellingPoint03: High-visibility Sight Glass And Stamped Cold-fill Line Allow For Quick Reading Of Coolant Level
- TechSpec Chassis Codes: T6
- SellingPoint08: N/a
- SellingPoint09: N/a
- OptionLabel: Polished
- SellingPoint10: N/a
- TechSpec Note: After A Few Heating And Cooling Cycles, Mishimoto Recommends Checking The Sight Tube On The Side Of The Expansion Tank To Confirm Proper Coolant Level.
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: 2.3l Ecoboost
- SellingPoint13: N/a
- TechSpec Height (in): 9.72
- SellingPoint14: N/a
- TechSpec Material: Aluminum
- TechSpec Applications: Ford Ranger I4 2.3l 2019+
- TechSpec Includes: (1)aluminum Coolant Tank W/ Sight Glass--(1) Drain Hose--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Width (in): 9.35
- TechSpec Fluid Capacity (gal): 1.03
- It's only been four years since the first Ford Ranger 2.3L EcoBoost rolled off the assembly line, but those four years have been rough on some of the plastic parts under your Ranger's hood. Your coolant expansion tank is probably beginning to show its age thanks to thousands of heating and cooling cycles bathed in orange or pink coolant. It's likely developed that classic dingy yellow tone, and it may be hard to see the coolant level through the side of the tank that gets more opaque by the day. Soon enough, that plastic expansion tank will become brittle, and one misplaced elbow or especially deep pothole has the potential to start a cascade of coolant. Luckily, Mishimoto's 2019+ Ford Ranger all-aluminum expansion tank is built to last a lifetime.----Our Ford Ranger EcoBoost expansion tank is constructed from aircraft-grade aluminum and precision TIG-welded to create a durable expansion tank that can withstand thousands of heat cycles and high pressures without cracks or leaks. On the outside, we've included a high-visibility sight glass and stamped cold-fill line to make checking your coolant level easy, while the available micro-wrinkle black powder coated or polished finishes suit any style. Our fill neck also accepts the stock expansion tank cap to keep maintenance easy. Inside, baffles keep coolant cycling into the engine, no matter how steep the road or trail gets.----Like all of our products, this aluminum expansion tank for your 2019+ Ford Ranger 2.3L EcoBoost is backed by our Mishimoto Lifetime Warranty for a lifetime of durability and worry-free running.
This Part Fits the Following OEM/Substitute Numbers:
EB3Z8A080D
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2023 - Ford Ranger | L | 2300 | 4 Cyl 2.3L | Turbocharged | 140 |
- Inlet/Outlet for Mishimoto Ford Bronco 21+ Intercooler and Intercooler Pipe Kit
- CNC Inlet/Outlet for Mishimoto Ford Bronco 2021+ Intercooler and Intercooler Pipe Kit
- Product Attributes:
- SellingPoint04: Constructed From Durable Cnc-machined 6061 Anodized Aluminum
- SellingPoint05: Precision-machined Dovetail Groove Keeps O-ring In Place For Easy Installation
- TechSpec Overall Height (Inches): N/a
- SellingPoint06: Pre-installed Viton O-ring Provides Optimal Resistance To Fuel And Oil
- SellingPoint07: Serrated Surface For Secure Coupler Connection
- SellingPoint01: Provides Maximum Airflow Between Mishimoto Intercooler Pipe Kit And Mishimoto Stock Location Intercooler
- SellingPoint02: Designed For Customers Who Purchased The Mishimoto Intercooler Pipe Kit And Stock Location Intercooler Separately
- SellingPoint03: 10-percent Inner Diameter Increase From Stock For Superior Airflow
- TechSpec Length (Inches): N/a
- TechSpec Minimum Yield Strength: N/a
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: N/a
- TechSpec Note: Recommended For Users Who Purchased Our Intercooler Pipe Kit First (2.3 Or 2.7) And Would Now Like To Adapt The Pipes To The Mishimoto Stock Location Intercooler
- TechSpec Installation Notes: N/a
- TechSpec Thread Size: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: 2.3l Ecoboost--2.7l Ecoboost
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: N/a
- TechSpec Diameter (Inches): N/a
- TechSpec Applications: Ford Bronco I4 2.3l 2021+--ford Bronco V6 2.7l 2021+
- TechSpec Includes: (2) Cnc-machined Intercooler Outlets--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): N/a
-
Features:
- Provides maximum airflow between Mishimoto Intercooler Pipe Kit and Mishimoto Stock Location Intercooler
- Designed for customers who purchased the Mishimoto intercooler pipe kit and stock location intercooler separately
- 10-percent inner diameter increase from stock for superior airflow
- Constructed from durable CNC-machined 6061 anodized aluminum
- Precision-machined dovetail groove keeps O-ring in place for easy installation
- Pre-installed Viton O-ring provides optimal resistance to fuel and oil
- Serrated surface for secure coupler connection
- Mishimoto Lifetime Warranty
- Mishimoto always strives to provide our customers with everything required for optimal vehicle performance. This CNC-machined inlet/outlet kit for the Mishimoto 2021+ Ford Bronco stock location performance intercooler is designed specifically to mate with our extremely efficient intercooler pipes. These adapters boast a 10-percent inner diameter increase over the stock pipe adapters and, when used in conjunction with either our 2.3L Intercooler Pipe Kit or 2.7L intercooler pipe kit, customers can expect maximum uninterrupted airflow through the entire charge air system. This pair of adapters is CNC-machined from billet 6061 aluminum and features a dovetail O-ring groove for easy installation and leak-free operation. The Viton O-ring provides optimal resistance against oil and fuel, ensuring decades of reliable service. Additionally, the serrated adapters keep the intercooler pipe boots secure under high boost. As with all our products, this Mishimoto 2021+ Ford Bronco stock location intercooler pipe adapter kit includes or signature Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ford Bronco | V | - | 6 Cyl 2.7L | 164 |
- Baffled Oil Catch Can Kit, Fits Chevrolet/GMC 1500 5.3L/6.2L 2019+
- Baffled Oil Catch Can Kit, Fits Chevrolet/GMC 1500 5.3L/6.2L 2019+
- Product Attributes:
- SellingPoint04: Prevents Blow-by From Contaminating Intake Mixture And Causing Knock
- SellingPoint05: Internal Air Diverter, Baffle, And 50 Micron Bronze Filter Maximize Oil Separation
- SellingPoint06: Catch Can Captures Blow-by, Preventing It From Fouling The Engine Oil
- SellingPoint07: Direct-fit Bracket Mounts The Catch Can Away From Engine Vibration
- SellingPoint01: Direct Fit For 2019+ Chevrolet/gmc 1500 With 5.3l/6.2l V8
- SellingPoint02: Installs In Under An Hour
- SellingPoint03: Protects Intake Valves From Power-robbing Carbon Buildup
- TechSpec Chassis Codes: T1
- SellingPoint08: Sturdy 3mm-thick Steel Brackets Withstand Rough Roads And Off-road Abuse
- SellingPoint09: Pre-installed Quick-disconnect Fittings For Clean Installation
- TechSpec Drain Plug Thread Size: 3/8-npt
- TechSpec Outlet: M16x1.5
- TechSpec Catch Can Diameter (in): N/a
- SellingPoint10: Filter And Can Are Fully Serviceable
- TechSpec Note: After Installation, Mishimoto Recommends Checking The Contents Of The Baffled Catch Cans Every 1,000 Miles Until A Baseline Is Established. Oil Blow-by Accumulation Will Vary With Ambient Temperatures And Driving Conditions. It Is Important That The Conte
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: 5.3l L83--6.2l L87
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- TechSpec Material: N/a
- TechSpec Applications: 2019+ Chevy Silverado 1500 5.3l/6.2l
- TechSpec Includes: (1) Direct-fit Mounting Bracket--(1) 3 Fl. Oz. Black, Anodized 6061-aluminum Catch Can--(2) Cnc-machined Aluminum Barbed Fittings--(2) Hoses W/ Pre-installed Quick-disconnect Fittings--(2) Worm Gear Clamps--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Inlet: M16x1.5
-
Features:
- Direct fit for 2019+ Chevrolet/GMC 1500 with 5.3L/6.2L V8
- Installs in under an hour
- Protects intake valves from power-robbing carbon buildup
- Prevents blow-by from contaminating intake mixture and causing knock
- Internal air diverter, baffle, and 50 micron bronze filter maximize oil separation
- Catch can captures blow-by, preventing it from fouling the engine oil
- Direct-fit bracket mounts the catch can away from engine vibration
- Sturdy 3mm-thick steel brackets withstand rough roads and off-road abuse
- Pre-installed quick-disconnect fittings for clean installation
- Filter and can are fully serviceable
- Mishimoto Lifetime Warranty
- The T1 Chevrolet Silverado is offered with both 5.3L and 6.2L LS engines. These engines feature direct injection, which is great for creating an efficient burn and saving fuel but allows for carbon buildup on the intake valves. As blow-by flows over the intake valves, oil and carbon deposits can build up, impeding airflow and eventually preventing the valves from closing. The best way to treat carbon buildup is to prevent it, and that's where this Mishimoto Chevrolet/GMC T1 direct-fit catch can kit comes in. This Mishimoto catch can kit diverts blow-by away from the intake and traps it in our catch can. Inside the can, a set of air turbulators and baffles separate fuel, oil, and water vapors from the crankcase gasses and collects them to be drained next time you change your oil. By not returning the blow-by to your oil pan, our kit prevents fouling of the oil that could reduce its effectiveness, leading to accelerated engine wear. Finally, a sintered bronze filter removes any remaining carbon from the crankcase gases so that only clean air returns to your intake. The Mishimoto Chevrolet/GMC T1 catch can kit is a complete bolt-on blow-by solution and includes all necessary components for a hassle-free installation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - GMC Sierra 1500 | V | 6162 | 8 Cyl 6.2L | 376 |
- Performance Air Intake, fits 2022+ Subaru WRX
- Performance Air Intake, fits 2022+ Subaru WRX
- Product Attributes:
- SellingPoint04: Highly-aggressive Intake Tone Under Acceleration
- SellingPoint05: Powder-coated Airbox Keeps Unwanted Hot Air From Entering The Air Intake
- SellingPoint06: Precision Cnc-machined Aluminum Maf Housing For Improved Flow And Accurate Maf Readings
- SellingPoint07: Mandrel-bent Aluminum Pipe Eliminates Restrictions And Increases Airflow
- SellingPoint01: Direct Fit For 2022+ Subaru Wrx
- SellingPoint02: Power Gains Of Up To 13.3 Hp And 16.6 Lb-ft On Stock Tune
- SellingPoint03: Dyno-tested For Safe Air/fuel Ratios Without Tuning
- TechSpec Air Filter Part Number: Mmaf-3007
- TechSpec Chassis Codes: N/a
- SellingPoint08: Mishimoto High-flow Oiled Air Filter Receives Maximum Airflow From The Front Of The Vehicle
- SellingPoint09: Us Patent Pending
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Filter Re-oil Is Not Included In Lifetime Warranty.
- SellingPoint15: N/a
- TechSpec Filter Diameter: 5.875
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Fa24
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Caution: N/a
- TechSpec Applications: 2022+ Subaru Wrx
- TechSpec Includes: (1) Aluminum Intake Pipe--(1) Cnc-machined Aluminum Maf Sensor Housing--(1) High-flow, Oiled Filter--(1) Powder Coated Airbox--(1) Silicone Coupler--(3) Worm Gear Clamps--mounting Hardware--mishimoto Lifetime Warranty
-
Features:
- Direct fit for 2022+ Subaru WRX
- Power gains of up to 13.3 HP and 16.6 lb-ft on stock tune
- Dyno-tested for safe air/fuel ratios without tuning
- Highly-aggressive intake tone under acceleration
- Powder-coated airbox keeps unwanted hot air from entering the air intake
- Precision CNC-machined aluminum MAF housing for improved flow and accurate MAF readings
- Mandrel-bent aluminum pipe eliminates restrictions and increases airflow
- Mishimoto high-flow oiled air filter receives maximum airflow from the front of the vehicle
- Mishimoto Lifetime Warranty
- Air intakes are some of the most fundamental bolt-on upgrades to a vehicle, often making them a first for many enthusiasts. The 2022+ Subaru WRX is no different. While the stock set up is adequate for daily commuting, your 2022+ WRX needs to be able to breathe easy to keep up with the demands of an enthusiast's spirited driving. The engineers at Mishimoto set out to unlock your WRX’s full potential with the 2022+ Subaru WRX Performance Air Intake.----Our engineers started by replacing the restrictive stock air filter with our performance oiled cone filter to substantially increase air volume, then paired it with a durable powder-coated steel airbox for superior heat protection. Our CNC-machined, precision-designed MAF housing allows for increased intake air flow while maintaining safe air-fuel ratios, eliminating the need for a tune after installation. This mates with our mandrel-bent aluminum inlet pipe to provide superior airflow over stock and gives your WRX a more aggressive tone under acceleration. This intake boasts a 75.4-percent reduction in air restriction with dyno-proven gains of up to 13.3 HP and 16.6 lb-ft of torque on stock tune.----The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally, this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on performance. As with all Mishimoto products, this 2022+ Subaru WRX Performance Air Intake is backed by the Mishimoto Lifetime Warranty.
This Part Fits the Following OEM/Substitute Numbers:
200-60-INT-003
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- High-mount Intercooler Kit, fits 2021+ Ford Bronco 2.7L, Black Intercooler
- High-mount Intercooler Kit, fits 2021+ Ford Bronco 2.7L, Black Intercooler, Black Pipes
- Product Attributes:
- SellingPoint04: Includes Adaptive Cruise Control Relocation Mount And Does Not Interfere With 360-degree Cameras
- TechSpec Pipe Shape: N/a
- SellingPoint05: 21-degree Reduction In Outlet Temperature Over Stock Intercooler
- SellingPoint06: Pipes Are Up To 34.2-percent Less Restrictive Than Stock
- SellingPoint07: Allows For Improved Clearance, Entry And Exit Angle, And Keeps Your Intercooler Protected From Obstacles On The Trail
- SellingPoint01: Direct Fit For 2021+ Ford Bronco 2.7l Ecoboost
- SellingPoint02: Relocates Intercooler For Better Airflow With Winches, Lights, And Other Off-road Accessories
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): N/a
- SellingPoint03: Dyno-proven Max Gains Of 11.6 Hp And 13.7 Lb-ft Torque
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: U725
- TechSpec Pipe Length: N/a
- SellingPoint08: 49-percent Greater Core Volume For High-efficiency Cooling
- SellingPoint09: Durable Bar-and-plate Core For Superior Durability And Performance
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 8.8
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): 3.15
- TechSpec Pipe Diameter: N/a
- OptionLabel: Black Intercooler, Black Pipes
- SellingPoint10: Replaces Weak Plastic Stock Pipes With Cast And Mandrel-bent Aluminum For Improved Durability
- TechSpec Note: Adaptive Cruise Control May Function To A Lesser Degree Compared To Stock Interooler Setup.
- TechSpec Installation Notes: N/a
- SellingPoint15: Mishimoto Lifetime Warranty
- Install Difficulty: 4
- SellingPoint11: Cast-aluminum End Tanks For Increased Pressure Tolerance And Reliability
- SellingPoint12: 1/8-npt Port On Cold-side Pipe For Methanol Injection Or Additional Sensors
- TechSpec Engine Codes: 2.7l Ecoboost
- SellingPoint13: Includes Mishimoto Silicone Boots With Duracore Technology For Superior Resistance To Heat, Pressure, Fuel, And Oil
- SellingPoint14: Available With A Stealth Black Or Sleek Silver Intercooler And Micro-wrinkle Black Powder Coated Pipes To Match Any Style
- TechSpec Core Length (in): 21.26
- TechSpec Overall Height (in): N/a
- TechSpec Applications: 2021+ Ford Bronco V6 2.7l Turbo
- TechSpec Includes: (1) High-mount Intercooler--(3) Intercooler Mounting Brackets--(3) Intercooler Ducts--(1) Acc Sensor Relocation Bracket Set--(2) Grille Shutter Delete Plugs--(4) Hot Side Intercooler Pipes--(2) Cold-side Intercooler Pipes--(9) Intercooler Pipe Boots--(18)
- TechSpec Weight (lbs): 65.1
- TechSpec Inlet (in): 3.15
- TechSpec Overall Width (in): N/a
- TechSpec Outlet (in): 3.15
- Unleash your 2021+ 2.7L EcoBoost Ford Bronco’s full potential with the Mishimoto High-Mount Intercooler Kit! Designed to allow your Bronco to breathe the coldest, densest air possible, this high-mount intercooler kit is comprised of our high-mount intercooler and performance intercooler pipe kit.----We’ve relocated the intercooler to the upper grille to allow better airflow at all times, even with winches, light bars, or larger bumpers installed. This location also helps protect the intercooler from obstacles on the trail. Our intercooler utilizes a 3.1 inch-thick bar-and-plate core that’s precision TIG welded to cast aluminum end tanks for superior durability and heat soak resistance. The weak plastic stock piping is replaced with high-flowing, durable cast and mandrel-bent aluminum piping and silicone boots with DuraCore technology. The larger volume of our pipes allows your 2.7L EcoBoost to breathe freely and make the most of its turbos, while the all-aluminum construction and DuraCore boots provide unmatched durability.----Durability is always a good thing, but it’s even better when it’s paired with performance. The high-mount intercooler boasts a 49-percent greater core volume and 93-percent greater external fin surface area than stock, which results in 21-degree cooler outlet temps over the stock intercooler. When combined with the intercooler pipes' 34-percent reduction in restriction, this kit produces power gains of 11.6 HP and 13.7 lb-ft. of torque on the stock tune.----This intercooler kit is available with a stealth black or sleek silver intercooler and micro-wrinkle black powder coated pipes. Functionality of adaptive cruise control is retained utilizing a relocation bracket and 360-degrees cameras are unaffected. As with all our products, the Mishimoto 2021+ Ford Bronco 2.7L High-Mount Intercooler kit is backed by our signature Mishimoto Lifetime Warranty and comes with all necessary hardware for easy installation.
This Part Fits the Following OEM/Substitute Numbers:
46-20584-B, 77-1006KC, MB3Z-6C839-A
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ford Bronco | V | - | 6 Cyl 2.7L | 164 |
Showing 1 - 10 of 28 products
Loading...