Image
Product
Price
- Performance Front-Mount Intercooler Kit, Fits Subaru WRX 2022+
- Performance Front-Mount Intercooler Kit, Fits Subaru WRX 2022+, Black Intercooler, Black Pipes
- Product Attributes:
- SellingPoint04: 4-inch Thick Core Protects Against Heat Soak And Detonation
- TechSpec Pipe Shape: N/a
- SellingPoint05: Includes Bumper Support Bar With Tow Hook Location To Keep Your Wrx Track-ready
- AttributeSet: Intercooler Kits
- SellingPoint06: Comprehensive Kit Includes Everything Needed For Installation
- SellingPoint07: Safe For Use With Stock Tuning
- SellingPoint01: Fits 2022+ Subaru Wrx
- SellingPoint02: Max Power Gains Of 12 Hp And 11.8 Lb-ft. Of Torque On Stock Tune
- TechSpec Maximum Recommended Horsepower: 1000
- TechSpec Overall Length (in): 40.22 (intercooler)
- SellingPoint03: Lowers Outlet Temperatures To Within 10-degrees Of Ambient Air Temp
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: Vb
- TechSpec Pipe Length: N/a
- SellingPoint08: Id-matched Pipes And Intercooler Ensure Unrestricted Airflow And Low Pressure Drop
- SellingPoint09: Built-in Crash Bar Hooks Make Installation A One-person Job
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 12.14
- TechSpec Maximum Recommended Boost Pressure (PSI): 60
- TechSpec Core Thickness (in): 3.93
- TechSpec Pipe Diameter: 2.5
- SellingPoint10: Cast End Tanks Withstand Massive Boost Pressures
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- SellingPoint15: Patent Pending
- SellingPoint16: Mishimoto Lifetime Warranty
- Install Difficulty: 3
- SellingPoint11: Includes Washer Fill Neck Relocation For Easy Maintenance
- SellingPoint12: No Bending Of A/c Lines Required
- TechSpec Engine Codes: Fa24f
- SellingPoint13: Fits With Most Popular Strut Bars
- SellingPoint14: Fits With Mishimoto Radiator And Oil Cooler
- TechSpec Core Length (in): 26.57
- TechSpec Overall Height (in): 12.89 (intercooler)
- TechSpec Applications: Subaru Wrx 2.4l H4 2022+
- TechSpec Includes: (1) Front Mount Intercooler--(1) Pipe And Boot Kit With Adaptors--(1) Bumper Support Bar--(1) Washer Fluid Fill Neck Relocation-- Mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 2.4
- TechSpec Overall Width (in): 6 (intercooler)
- TechSpec Outlet (in): 2.4
- For 2022+ WRX owners looking to take the next step in performance, look no further than Mishimoto’s Performance Front-Mount Intercooler Kit. Whether you’re building your WRX for the track, dragstrip, or the road, upgrading your WRX’s intercooler is an absolute must. Designed with a massive core, CFD-optimized cast end tanks, and high-flow pipes, this intercooler offers gains of 12 hp and 11.8 lb-ft torque.----The front mounting location of this kit places the intercooler in the lower bumper grille for maximum airflow through the core, making this system ideal for high-performance builds. In dyno testing, our intercooler was able to bring outlet temperatures to within 10-degrees of ambient air temp, ensuring safe power run after run, even on the stock tune. CFD-optimized end tanks, ID-matched pipes, and a high-flow, 4 inch-thick core result in a 1.5 PSI pressure drop, so less of the boost your turbo makes is wasted.----Performance is great, but if you have to destroy your car for it, it’s useless. Our kit contains everything needed for installation with no cutting of the bumper or body required. Our intercooler kit also retains the factory side impact bars and includes a bumper support bar with factory tow hook mounting for safety on the track and the street. The included washer fill neck relocation kit keeps maintenance easy, while allowing for a clean install.----So, If you’re ready to ditch your stock, heat-soak-prone intercooler, it’s time to upgrade to the Mishimoto Performance Front Mount Intercooler Kit. Designed for dependable performance and backed by Mishimoto’s Lifetime Warranty, our 2022+ WRX front mount intercooler kit is the perfect choice for bringing your WRX to the next level.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2024 - Subaru WRX | H | 2387 | 4 Cyl 2.4L | Base | Turbocharged | 146 |
- License Plate Relocation Kit, Fits Subaru WRX 2022+/Crosstrek 2018+
- License Plate Relocation Kit, Fits Subaru WRX 2022+/Crosstrek 2018+
- Product Attributes:
- SellingPoint04: Mounts To Oem Front Tow Hook With No Permanent Modifications Required
- SellingPoint05: Includes All Necessary Hardware For Installation Including Stainless-steel License Plate Screws
- TechSpec Overall Height (Inches): 5.49
- SellingPoint06: Fabricated From High-strength 6061 Aluminum
- SellingPoint07: Angled To Follow Contours Of The Bumper And Reduce Wind Resistance
- SellingPoint01:
- Direct Fit For 2022+ Subaru Wrx
- Direct Fit For 2022+ Subaru Wrx/2018+ Crosstrek
- SellingPoint02: Installs In Under 15 Minutes
- SellingPoint03: Avoids The Need To Drill Holes In Your Front Bumper
- TechSpec Length (Inches): 7.87
- TechSpec Minimum Yield Strength: N/a
- SellingPoint08:
- Anodized Black Shaft And Powder Coated Black Plate Bracket For A Durable, Corrosion-resistant Finish
- Anodized Black Shaft And Powdercoated Black Plate Bracket For A Durable, Corrosion-resistant Finish
- SellingPoint09: Allows Full Airflow To Radiator And Fmic
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: N/a
- TechSpec Installation Notes: 19.91 Lb-ft
- TechSpec Thread Size: M16 X 1.5
- SellingPoint15: N/a
- Install Difficulty: 1
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Fa24
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: 6061 Aluminum
- TechSpec Diameter (Inches): 0.75
- TechSpec Applications:
- 2022+ Subaru Wrx
- Subaru Wrx 2022+--subaru Crosstrek 2018+
- TechSpec Includes: (1) License Plate Mounting Bracket--(1) Front Tow Hook Mounting Shaft--all Required Hardware For Installation & Mounting License Plate--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): 0.68
-
Features:
- Direct fit for 2022+ Subaru WRX/2018+ Crosstrek
- Installs in under 15 minutes
- Avoids the need to drill holes in your front bumper
- Mounts to OEM front tow hook with no permanent modifications required
- Includes all necessary hardware for installation including stainless-steel license plate screws
- Fabricated from high-strength 6061 aluminum
- Angled to follow contours of the bumper and reduce wind resistance
- Anodized black shaft and powder coated black plate bracket for a durable, corrosion-resistant finish
- Allows full airflow to radiator and FMIC
- Mishimoto Lifetime Warranty
- Front license plates are a drag, literally. In the case of the 2022+ Subaru WRX/2018+ Crosstrek, the front license plate installs directly in the center of the front bumper, partially blocking the lower grill. It creates wind resistance, blocks critical airflow to your radiator, forces you to drill holes in your front bumper, and just doesn’t look nice. With the Mishimoto License Plate Relocation Kit, we solve all these problems. Designed specifically for the 2022+ Subaru WRX/2018+ Crosstrek, our License Plate Relocation Kit is fabricated from high-strength, anodized and powder coated 6061 aluminum. Mounting to the OEM tow hook location allows for a direct fit while hugging the contours of your bumper for a clean, seamless installation. Additionally, moving the plate to the side and angling to follow the body lines helps reduce wind resistance and free up space in the center to allow critical airflow to reach your radiator. And let’s be honest, it just looks better! The days of ugly holes in your bumper are over. Our License Plate Relocation Kit includes all necessary hardware for an easy installation, and as with all our products, this kit includes our signature Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2024 - Subaru WRX | H | 2387 | 4 Cyl 2.4L | Sport-tech | 146 |
Showing 1 - 2 of 2 products
Loading...