Image
Product
Price
- Supports Up To 1200Hp; OEM Fuel Pressure Regulator Provisions
- Composite Fuel Rail; Supports Up To 1200Hp; OEM Fuel Pressure Regulator Provisions;
- Composite Fuel Rail
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Supports Up To 1200 HP
- Integrated -8 AN Inlet/Outlet For Easily Customized Fuel Lines
- Features Additional 1/8-in. NPT Fuel Pressure Ports
- Features OEM Fuel Pressure Regulator Provisions
- Skunk2's cutting-edge Composite Fuel Rail for Honda's B-series engines is here. Skunk2's Composite Fuel Rails are made using a proprietary carbon-impregnated, aerospace thermo-polymer composite—a material that's 33-percent lighter, 60-percent stronger, and operates up to 100-degrees F cooler when compared to aluminum and insulates fuel from both radiant and conductive heat transfer underneath the hood, resulting in increased horsepower and torque. Composite Fuel Rails also feature large 0.625- in. internal bores for superior fuel injector pulsation dampening, are machined with a smooth interior finish, and feature radius-cut fuel injector outlets for improved flow characteristics. The special design that eliminates the sharp internal angles where the main bore meets the fuel injector bores inherent with conventional extruded- and drilled-aluminum designs can only be achieved with such composite materials. Skunk2's B-series Composite Fuel Rails are compatible with the factory fuel system, as well as all fuels, including alcohol, and can support up to 1,200 hp, with gains as high as three percent realized during testing.
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Acura Integra |
- Lower; 40 Percent Lighter Than OEM; Includes Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 6061-T6 Aluminum; Black Anodized; Set of 2
- Ultra Series Control Arm Set; Lower; 40 Percent Lighter Than OEM; Includes Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 6061-T6 Aluminum; Black Anodized; Set of 2;
- Ultra Series Control Arm Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Forged 6061-T6 Billet Aluminum
- CNC Machined To A Precise Fit And Finish
- 15% Lighter Than Previous Skunk2 LCAs
- 40% Lighter Than OEM Arms
- 7% Stronger Than Previous Skunk LCAs
- Tuned Durometer Elastomeric Bushings To Damp Out Harshness
- Delrin Shock Bushings For Low Friction w/Minimal Deflection
- Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Alpha Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Alpha Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years and are a must-have for enthusiast looking to fine-tune their suspension for maximum handling performance while keeping budget in mind. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. When deciding on a material to base our new design on, we chose very carefully, as there are many inferior annealed and cheap versions of aluminum available on the market today. We chose 6061-T6 because of its excellent strength to weight ratio. With an ultimate tensile strength of over 42,000 PSI, and fatigue strength of 14,000 psi for 500 million cycles – we knew this would be perfect for the Alpha Series Lower Control Arms. The result of our re-engineered lower control arm is a 6061-T6 Forged Aluminum LCA, that is 15% lighter and 7% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this specific combination of bushings allows the most comfort and control under any driving conditions. Properly designed suspension components must be strong and functional first and aesthetically pleasing second. Skunk2's Rear Lower Control Arms are both..
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1990 - Honda Civic | L | 1588 | Rear Lower | 4 Cyl 1.6L | Si | 98 |
- Front Tender/Main Spring Rate 369 lb-in./559 lb-in.; Rear Tender/Main Spring Rate 134 lb-in./419 lb-in.; Lowers Front/Rear 2.5 in./2.25 in.; Set of 4
- Lowering Coil Spring Set; Front Tender/Main Spring Rate 369 lb-in./559 lb-in.; Rear Tender/Main Spring Rate 134 lb-in./419 lb-in.; Lowers Front/Rear 2.5 in./2.25 in.; Set of 4;
- Lowering Coil Spring Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Front Spring Rate (Tender/Main) 369 lb.-in/559 lb.-in
- Rear Spring Rate (Tender/Main) 134 lb.-in/419 lb.-in
- Drop (Front/Rear) 2.25 in./2.00 in.
- Corner faster, stop quicker, and improve the look of your vehicle with Skunk2s legendary Lowering Springs.Skunk2 Lowering Springs for the '90-'93 Integra are designed to dramatically improve handling performance and driver feel through significantly increased cornering grip and reduced body roll. What's more, Skunk2 Lowering Springs also help counteract squatting under acceleration as well as nose-diving while braking. All Skunk2 Lowering Springs are CNC-wound using the highest quality SAE 9254V spring steel, shot-peen stress relieved, and corrosion-protected thanks to powdercoating and specialized phosphate treating processes. The results are a lower center of gravity and race car-like handling, yet smooth, comfortable ride characteristics—the perfect balance between performance and comfort. Skunk2 Lowering Springs are compatible with OEM or aftermarket shock absorbers and look great on vehicles with stock or aftermarket wheels. When applicable, Skunk2 Lowering Springs should be paired with Skunk2 Sport Shocks and other fine Skunk2 suspension components.
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Acura Integra |
Showing 1 - 3 of 3 products
Loading...