Image
Product
Price
- Wheel End Spindle Lock Washer
- with Dana 44 Front Axle 1.640in Inside Diameter x 2.180in Outside Diameter with 0.125in Width with 16 Outer Holes
- FSGR
- Product Attributes:
- Inner Diameter: 1.645
- Outer Diameter: 2.170
- Thickness: 0.123
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
816671, DS36569
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Dodge W250 |
- Ball Joint Kit - Upper/Lower (One Side)
- with Dana 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Location: Upper/lower
- Greasable: N
- Adjustable: N
- Ball Joint Kit: Y
- Axle Model: Dana 30/44
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Includes upper and one lower ball joint, one lower ball joint and hardware
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
816753, DS706116X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W250 | Front |
- SPINDLE NUT & PIN - INNER
- Axle Stamped 610341 Replaces OE Part Number(s) 04723088 with Dana 60 Front Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Thread Size: 2.000 - 16
- Self Locking: N
- Flange Diameter: 63.31mm
- Thickness: 8.83mm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
1403357, 15582233, DS660568, E5TZ-1B198-A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W250 | Front |
- SPINDLE NUT & PIN - INNER
- Replaces OE Part Number(s) 04723088 with Dana 61 Front Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Thread Size: 2.000 - 16
- Self Locking: N
- Flange Diameter: 63.31mm
- Thickness: 8.83mm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W350 | Front |
- Non-Greasable with Dana Model 60 Axle 1 Piece Driveshaft Inside Snap Ring Dimension of 3.000in with Uncoated
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: N
- Length B (In): 3
- Bearing Cap Diameter (1): 1.375
- Length A (In): 3
- SR(1)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Diameter A (mm): 1.375
- Bearing Cap Type: Round
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3.000
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-807X, 3-0332, 374, 45U0301, CP332X, UJ374
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W350 | Front Axle at Wheels |
- with 2 Piece Drive Shaft with Dana Model 60 Axle Inside Snap Ring Dimension of 3.000in Non-Greasable with Uncoated
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: N
- Length B (In): 3
- Bearing Cap Diameter (1): 1.375
- Length A (In): 3
- SR(1)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Diameter A (mm): 1.375
- Bearing Cap Type: Round
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3.000
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W350 | Front Axle at Wheels |
- Inside Snap Ring Dimension of 3.000in with Dana Model 60 Axle 1 Piece Driveshaft Greaseable with Uncoated
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: Y
- Length B (In): 3
- Bearing Cap Diameter (1): 1.375
- Length A (In): 3
- SR(1)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Diameter A (mm): 1.375
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-807X, 3-0332, 374, 45U0301, 89029369, UJ374
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W350 | Front Axle at Wheels |
- with 2 Piece Drive Shaft with Dana Model 60 Axle Greaseable Inside Snap Ring Dimension of 3.000in with Uncoated
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: Y
- Length B (In): 3
- Bearing Cap Diameter (1): 1.375
- Length A (In): 3
- SR(1)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Diameter A (mm): 1.375
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W350 | Front Axle at Wheels |
- Axle Shaft Flange Gasket
- with Dana 70 Axle
- FSGR
- Product Attributes:
- Quantity: 1
- Fitment: Outer Axle Flange
- Axle Model: Dana 60, Dana 70, Dana 80
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
DS39697
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge D250 | Rear |
- Axle Spindle Bearing
- with Dana 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Cup Outside Diameter (MM): 41.20
- Cone Bore (MM): 33.32
- Cup Outside Diameter (IN): 1.62
- Bearing Type: Spindle Bearing And Seal Kit
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2JA749, 816757, DS706527X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W150 | Front |
Showing 1 - 10 of 144 products
Loading...