Image
Product
Price
- Camber adjusting - bolt
- 12mm - adds +/- 0.75 deg camber
- Whiteline Camber adjusting - bolt.
- Camber adjusting bolt 12mm
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline 12mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Toyota Yaris iA |
- Roll Centre/Bump Steer - Correction Service Kit
- Contains 2 replacement Ball Joint boots and 2 replacement Tie Rod End Boots
- Whiteline Roll Centre/Bump Steer - Correction Service Kit
- KCA435 SERVICE KIT - Ball Joint/Tie Rod Boot Set
-
Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Kit Contains 4 Boots, 4 Clips
- The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
- Service kit to suit Whiteline Roll Centre/Bump Steer Correction Kit
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2018 - Toyota 86 | GT |
- Adjustable Extra Heavy Duty
- Whiteline Sway bar - link.
- Sway bar - link
- Product Attributes:
- Grade Type: Performance
-
Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Eliminate sway bar preload during installation and allow for on-car length adjustment and rotate to any angular combination for ease of fitment and optimum performance.
- Featuring premium anodized alloy materials, providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Heavy duty ball joint ensures optimum durability & steering predictability.
- Install guide included providing detailed instructions on how to install your new purchase .
- Manufactured from high quality alloy and include heavy duty steel ball joints ensuring maximum strength and durability.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Knock, knock, knock! That's the sound you hear when your sway bar links are not doing their job. Links are a common service item due to either worn or over compliant bushings/ joints and possibly bent or snapped centre bodies. Upgrade with Whiteline links boasting heavy duty joints and uprate centre body and Whiteline link bushings that outlast and outperform the original equipment.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2018 - Toyota 4Runner | Front | United States | SR5 |
- Sway bar - link
- Adjustable Extra Heavy Duty. Length 125-150mm. Bolt Diameter 12mm.
- Whiteline Sway bar - link.
- Adjustable Sway Bar End Link Set
- Product Attributes:
- Grade Type: Performance
-
Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Eliminate sway bar preload during installation and allow for on-car length adjustment and rotate to any angular combination for ease of fitment and optimum performance.
- Featuring premium anodized alloy materials, providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Heavy duty ball joint ensures optimum durability & steering predictability.
- Install guide included providing detailed instructions on how to install your new purchase .
- Manufactured from high quality alloy and include heavy duty steel ball joints ensuring maximum strength and durability.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Knock, knock, knock! That's the sound you hear when your sway bar links are not doing their job. Links are a common service item due to either worn or over compliant bushings/ joints and possibly bent or snapped centre bodies. Upgrade with Whiteline links boasting heavy duty joints and uprate centre body and Whiteline link bushings that outlast and outperform the original equipment.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota 4Runner | Front | TRD Off-Road Premium |
- Control arm - lower arm assembly (camber/toe correction) MOTORSPORT
- Complete new rear arms with +/- 2.5 deg camber adjustment
- Whiteline Control arm - lower arm assembly (camber/toe correction) MOTORSPORT.
- Control arm - rear lower arm
- Product Attributes:
- Ball Joint Included: N
- Adjustable: Y
- Grade Type: Performance
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Adjustable lower control arms feature a light weight (1.72kg/3.8lbs per complete arm) stamped steel design. Adjusts via cam bolt and eccentric bushing for in-field adjustment versatility.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota 86 | Rear | GT |
- Control arm - upper arm
- Fits 6 Lug 2WD & 4WD Trucks Only. Adds 2.5 to 3.5 degrees of additional positive caster and up to 1.5 degrees of additional negative camber at 2" of lift.
- Whiteline Adjustable Front Upper Control Arm
- Camber/Caster Correction Fixed Front UCalifornia Set
-
Features:
- Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.
- A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCalifornia (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota Tacoma | Front Upper | SR |
- Control arm - lower arm assembly (camber/toe correction) MOTORSPORT
- Complete new rear arms with +/- 2.5 deg camber adjustment
- Whiteline Control arm - lower arm assembly (camber/toe correction) MOTORSPORT.
- Control arm - lower arm
- Product Attributes:
- Ball Joint Included: N
- Adjustable: Y
- Grade Type: Performance
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Adjustable lower control arms feature a light weight (1.72kg/3.8lbs per complete arm) stamped steel design. Adjusts via cam bolt and eccentric bushing for in-field adjustment versatility.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2018 - Toyota 86 | Rear | United States | GT |
- Control-arm-lower-inner-bushing
- Whiteline Suspension Control Arm Bushing.
- Front Lower Control Arm Inner Bushing Kit
- Product Attributes:
- Bushing 1 Inner Diameter: 16.2
- Grade Type: Regular
- Mounting Hardware Included: No
- Bushing 2 Inner Diameter: 21.5
- Bushing Quantity: 4 Bushings
- Bushing 1 Outer Diameter: 50.8
- Material: Polyurethane
-
Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Install guide included providing detailed instructions on how to install your new purchase .
- Internal grease reservoirs provide continual self-lubrication for optimum friction management.
- Precisely placed dampening voids further reduces harshness from sudden road inputs.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
- Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota 4Runner | Front Lower Inner | TRD Off-Road |
- Camber adjusting - bolt
- 14mm - adds +/- 0.75 deg camber
- Whiteline Camber adjusting - bolt.
- Camber adjusting bolt 14mm
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Toyota 86 | Front | GT |
- Camber adjusting - bolt
- 16mm - adds +/- 0.75 deg camber - 16mm - adds +/- 0.75 deg camber
- Whiteline Camber adjusting - bolt.
- Camber adjusting bolt 16mm - Camber adjusting bolt 16mm
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline 16mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2018 - Toyota 86 | GT |
Showing 1 - 10 of 12 products
Loading...