Image
Product
Price
- 2.5" Lift Leaf Spring Mini Pack
- This listing is for a single spring. Zone Offroad ZONF5251 adjustable track bar typically required for installation.
- Unlike a typical add-a-leaf leveling kit, this 5 leaf mini pack achieves most of the lift from the thickness of the pack rather than re-arching the stock leaf pack, helping to maintain ride quality while leveling your vehicle. This mini-pack will achieve approximately 2.5" of lift on a Super Duty and 4" of lift on an Excursion.
- In the box: Leaf Spring Mini Packs - Front
- Product Attributes:
- Horizontal Position: Front
- Number of Leafs: 5
- Pin Size: N/a
- Length: 38.38
- Eye to Center Front: 15"
- Width: 3"
- Rear Eye Diameter: N/a
- Eye to Eye: 38.5
- Eye to Center Rear: 23.5"
- Overload Spring: No
- Center Pin Size: 0.438
- Front Eye Diameter: N/a
- Free Height: 2
-
Features:
- Maintains Factory Ride Quality and Handling Characteristics.
- Perfect addition to any plow truck.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1999 - Ford F-350 Super Duty | 4WD |
- 4" Leaf Spring
- Bushings included & pre-installed. Sold individually - order QTY 2 for a pair.
- This multi-spring leaf pack provides 4" of lift on a Super Duty and 6" of lift on an Excursion without sacrificing ride quality. Meets or exceeds original equipment ratings and comes with factory-equipment-style rubber bushings. Sold individually.
- In the box: 1 Leaf Spring
- Product Attributes:
- Horizontal Position: Front
- Number of Leafs: 5
- Pin Size: 5/8"
- Length: N/a
- Eye to Center Front: 25.88"
- Width: 3"
- Rear Eye Diameter: 0.63
- Eye to Eye: 52.38
- Eye to Center Rear: 26.5"
- Overload Spring: No
- Center Pin Size: 0.438
- Front Eye Diameter: 0.72
- Free Height: 8.13
-
Features:
- Leaf with center leaf spacer plates between each leaf and anti-friction pads for smooth, quiet operation.
- Preinstalled OE-style rubber bushings
- Springs sold individually
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1999 - Ford F-350 Super Duty | 4WD |
- Rear Track Bar Relocation Bracket
- This bracket is made for slip yoke eliminator (SYE) kits and dual cardan rear driveshafts, and is adjusted to provide the axle rotation necessary for proper driveshaft alignment when using a double cardan setup on TJ's with 4 - 4.5" of lift.
- In the box: All Necessary Mounting / Installation Hardware All Necessary Mounting / Relocation Brackets
- Product Attributes:
- For Use With Lift Heights: 4-4.5"
- Horizontal Position: Rear
-
Features:
- This bracket is made for TJ's with 4 - 4.5" of lift using slip yoke eliminator (SYE) kits and dual cardan rear driveshafts.
- This track bar bracket is adjusted for the axle rotation necessary for proper driveshaft alignment when using a double cardan setup.
- Properly align your lifted truck with Zone Offroad adjustable track bars and track bar relocation drop brackets. Fix the dreaded death wobble by correcting your steering geometry with a Zone track bar or bracket kit. Easy to install and affordable solutions to correct lifted suspension systems.
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - Jeep Wrangler TJ |
- Sway Bar Links
- Is your truck lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8? solid steel with eyelets at either end and install with black urethane bushings, sleeves and mounting hardware. Designed for use with 4" lift kits.
- In the box: All Necessary Mounting / Installation Hardware Bushings Sway Bar Links
- Product Attributes:
- For Use With Lift Heights: 2.5-4"
- Horizontal Position: Front
- Is Adjustable: Yes
- Length: 13-1/2"
-
Features:
- HD design with 5/8" solid steel center section
- Black urethane eyelet bushings for improved performance
- Clear zinc plated for long lasting appearance
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - Ford F-350 Super Duty |
- 3" Leaf Spring
- Bushing kit part number J7008 is also required.
- This spring is a 5-leaf pack with anti-friction pads and center leaf spacer plates between each leaf to significantly decrease leaf pack internal friction. This rear XJ leaf spring provides 3" of lift and allows for the max amount of compression travel, which translates to increased wheel travel. Sold Individually, bushings sold separately.
- In the box: 1 Leaf Spring
- Product Attributes:
- Horizontal Position: Rear
- Number of Leafs: 5
- Length: 48-5/8"
- Eye to Center Front: 21.89"
- Width: 2-1/2"
- Rear Eye Diameter: 1.75
- Eye to Eye: 48.63
- Eye to Center Rear: 26.74"
- Overload Spring: No
- Center Pin Size: 0.313
- Front Eye Diameter: 2.5
- Free Height: 6.5
-
Features:
- Anti-friction pads included.
- Center leaf spacer plates between each leaf.
- Improves ride and handling over your old tired factory XJ rear springs.
- Sold Individually, bushings sold separately.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1999 - Jeep Cherokee XJ | 4WD |
- Control Arm Kit
- Jack / Jack Stands
- Upgrade your Jeeps weak factory stamped steel control arms for to these high strength lower control arms from Zone Offroad. Along with added strength, they offer caster correction and durable rubber bushings for a long life, improved flex and easy installation. Designed for use with 3-4" lift kits.
- In the box: Bushings Control Arms
- Product Attributes:
- For Use With Lift Heights: 3-4"
- Vertical Position: Lower
- Horizontal Position: Front Or Rear
-
Features:
- Designed for improved strength and axle positioning under your 3-4" lifted Jeep TJ
- 1-3/4" x 1/4" DOM steel constructed, formed for proper fitment and finished in durable textured black powdercoat
- Factory style rubber bushings for long, service free operation
- Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - Jeep Wrangler TJ |
- Add-A-Leaf Kit
- Jack / Jack Stands
- Need a little extra boost in the rear of your truck? This add-a-leaf kit will provide additional lift in the rear while maintaining ride quality and increasing load capacity.
- In the box: Add-A-Leaf's Center Pins Leaf Spring Alignment Clamps
- Product Attributes:
- Horizontal Position: Rear
- Number of Leafs: 1
- Pin Size: 9/16"
- Length: 38-3/8"
- Width: 2-1/2"
- Center Pin Size: 0.375
- Free Height: 6.75
-
Features:
- Includes a pair of add-a-leafs, center pins, and alignment clamps
- Retains ride quality while increasing ride height and load capacity
- Includes easy to follow instructions
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - GMC Sierra |
- Adjustable Track Bar
- Will not fit vehicles produced before 3/1/1999.
- Upgrade your factory front track bar for improved strength, control, and axle positioning with this high strength adjustable replacement track bar. Designed for easy installation and fine adjustment, this adjustable track bar to re-center your front axle at a wide range of lift heights and comes fully assembled and ready to install. It uses fine threaded center turnbuckle adjust with pinch-bolt clamps to lock down positioning.
- In the box: Pinch Bolts Track Bar
- Product Attributes:
- For Use With Lift Heights: 1-4"
- Horizontal Position: Front
- Is Adjustable: Yes
-
Features:
- Actual adjustment is from approximately 30.25-33.25 inches.
- Adjustable from 1" to 4" of lift, mounting in the factory locations.
- Properly align your lifted truck with Zone Offroad adjustable track bars and track bar relocation drop brackets. Fix the dreaded death wobble by correcting your steering geometry with a Zone track bar or bracket kit. Easy to install and affordable solutions to correct lifted suspension systems.
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - Ford F-350 Super Duty |
- Carrier Bearing Drop Kit
- Carrier bearing drop kits eliminate driveshaft vibrations in your lifted truck by correcting rear drive shaft angles. These steel carrier bearing drop kits are powder-coated for durability and include mounting hardware for a complete install.
- Product Attributes:
- For Use With Lift Heights: Any
-
Features:
- Repositions the carrier bearing to more closely mimic the factory operating angle to eliminate rear driveline vibrations on lifted applications with 2-piece rear driveshafts
- Mounting hardware included
- Eliminate unwanted driveshaft vibrations in your lifted truck with a Zone Offroad Carrier Bearing Drop Kit. Available for Ford, Chevrolet, GMC, RAM, Dodge and Toyota trucks, the design corrects rear driveshaft angles by re-positioning the carrier bearing assembly as needed. Proper driveline angle is critical for a safe, reliable driveshaft and U-Joint function. All Carrier Bearing Drop Kits are powder-coated for durability and include mounting hardware for a complete, easy install.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1999 - Ford F-350 Super Duty | 4WD |
- Adjustable Track Bar
- JK Models - For use with 0"-4" of lift. WJ Models - For use with 2"-4" of lift. Requires 2" of bump stop extension for proper axle clearance. Not Included.
- Upgrade your factory front track bar for improved strength, control, and axle positioning with this heavy duty adjustable replacement track bar. Designed for easy installation and fine adjustment, this track bar allows you to recent the front axle with a wide range of lift heights. The bar itself is manufactured from 1.25? OD solid stock, formed for proper fitment and optimal clearance. At either end a durometer specific urethane bushings are used to better isolate road noise and vibrations.
- In the box: Bushings Jam Nut Track Bar
- Product Attributes:
- For Use With Lift Heights: See Notes
- Horizontal Position: Front
- Is Adjustable: Yes
-
Features:
- High strength 1.25" solid steel construction with a 1"-14 threaded end for adjustable length.
- Black urethane eyelet bushings and sleeves for better control motion for improved handling
- Durable textured black powdercoat for long lasting appearance
- Properly align your lifted truck with Zone Offroad adjustable track bars and track bar relocation drop brackets. Fix the dreaded death wobble by correcting your steering geometry with a Zone track bar or bracket kit. Easy to install and affordable solutions to correct lifted suspension systems.
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - Jeep Grand Cherokee WJ |
Showing 1 - 10 of 11 products
Loading...