Image
Product
Price
- 2" Adventure Series Leveling Kit
- Does not fit factory air-ride equipped models. Does not fit TRX models. Requires strut disassembly. Will NOT fit 2019-2021 RAM 1500 Classic models, Refer to the 2018 kit listings.
- Level out your RAM 1500 the right way with Zone Offroad. In addition to these steel fabricated top mounted strut spacers designed for 2" of lift, these kits address the limitations of the factory upper ball joint (maxed out with a leveling kit installed which will lead to premature wear) by upgrading to adventure series upper control arms (UCAs). These fully boxed and welded UCAs offer superior strength and performance and use an indexed ball joint cup designed for more droop travel. Parts come fully assembled and ready to install right out of the box to allow clearance for 33" tires.
- In the box: Strut Spacer - Front Upper Control Arms
- Product Attributes:
- Max Tire Size 2: 33 X 12.5
- Lift Type: Leveling Kit
- Front Lift Method: Strut Spacers
- Wheel Size 2: 18 X 9
- Accommodates Factory Wheels: No
- Rear Lift Height: -
- Wheel Size: 20 X 9
- Back Spacing 2: 5"
- Back Spacing: 5"
- Front Lift Height: 2"
-
Features:
- Combination top spacer and preload spacer to not overextend suspension
- Adventure series UCalifornia correct ball joint angle and improve travel
- Retains factory ride quality and functionality
- Levels stance and allows clearance for 33" tires
- Easy to follow instructions
- Includes Factory Protection Plus
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram Rebel |
- Single Steering Stabilizer
- OE Replacement Mounting Design.
- While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality systems are designed to improve tire wear and front end component life as well as lessen side to side motion caused by wide tires and unpredictable road conditions.
- In the box: All Necessary Mounting / Installation Hardware Bushings Single Steering Stabilizer Cylinder
- Product Attributes:
- For Use With Lift Heights: Any
- Body Material: Steel
-
Features:
- Helps control front end shimmy caused by oversized wheels/tires
- Extends life of front end steering components
- Heavy duty cylinder construction
- Mounting bracket included
- Zone Offroad offers Nitro Series Steering Stabilizers in single and dual configurations as well as FOX ATS Steering Stabilizers for Chevrolet / GMC, Ford, RAM, Dodge trucks as well as Jeeps. Benefits include improved steering feel and heavy-duty shafts. Zone Nitro Series Steering Stabilizers feature twin-tube design and steel body construction for affordable performance. Bolt-on design. Made in the USA.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Jeep Wrangler JL |
- Dual Steering Stabilizer Kit
- 2"+ of additional bump stop required (included with most lift kits). Brackets designed for stock axle and steering linkage.
- While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality dual steering stabilizer systems are designed to improve tire wear and front end component life as well as lessen side to side motion caused by wide tires and unpredictable road conditions. Kits include cylinders, brackets and mounting hardware.
- In the box: All Necessary Mounting / Installation Hardware Bushings Dual Steering Stabilizer Cylinders
- Product Attributes:
- For Use With Lift Heights: Over 4"
-
Features:
- Helps control front end shimmy caused by oversized wheels/tires
- Extends life of front end steering components
- Dual heavy duty cylinder construction
- Mounts stabilizers end-to-end
- Mounting brackets and hardware included
- Zone Offroad offers Nitro Series Steering Stabilizers in single and dual configurations as well as FOX ATS Steering Stabilizers for Chevrolet / GMC, Ford, RAM, Dodge trucks as well as Jeeps. Benefits include improved steering feel and heavy-duty shafts. Zone Nitro Series Steering Stabilizers feature twin-tube design and steel body construction for affordable performance. Bolt-on design. Made in the USA.
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Jeep Wrangler JK |
- JL/JT Dual Steering Stabilizer Kit
- For use with 2"+ lifts (requires 2" of additional bump stop)
- While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality dual steering stabilizer systems are designed to improve tire wear and front end component life as well as lessen side to side motion caused by wide tires and unpredictable road conditions. Kits include cylinders, brackets and mounting hardware.
- In the box: All Necessary Mounting / Installation Hardware Dual Steering Stabilizer Cylinders
- Product Attributes:
- Welding Required: No
- Cutting Required: No
- Shock Diameter: 2-3/8"
- Body Material: Steel
-
Features:
- Helps control front end shimmy caused by oversized wheels/tires
- Extends life of front end steering components
- Dual heavy duty cylinder construction
- Mounts stabilizers end-to-end
- Mounting brackets and hardware included
- Zone Offroad offers Nitro Series Steering Stabilizers in single and dual configurations as well as FOX ATS Steering Stabilizers for Chevrolet / GMC, Ford, RAM, Dodge trucks as well as Jeeps. Benefits include improved steering feel and heavy-duty shafts. Zone Nitro Series Steering Stabilizers feature twin-tube design and steel body construction for affordable performance. Bolt-on design. Made in the USA.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Jeep Wrangler JL |
- 1.75" Leveling Kit
- Complete 1.75" leveling recommended for AT4, Trail Boss suspension not as raked for the factory so installing without thin preload spacer will net 1-3/8" lift for a level stance. Tires wider than 295 cannot be installed on factory wheels due to clearance issues to the steering knuckles. Will not fit Adaptive Ride Control (ARC) equipped models. 2022 Models: This system has not been tested on models equipped with Super Cruise. Tire and Wheel Fitment: 5.5" MAX Backspacing due to UCalifornia Clearance 35/12.50 18x9, 20x9; 5.5" BS (Chevy) 33/12.50 18x9, 20x9; 5.5" BS (GMC) 295/60 20x9; 5.5" BS (GMC) 295/60 20x9, 5.5-4.5" BS (Chevy) 305/55 20x9, 5.5-4.5" BS (GMC & Chevy) 295/65 18x9, 5.5-4.5" BS (GMC & Chevy) 295/70 17x9, 5.5-4.5" BS (GMC & Chevy)
- Specially designed for the 2019-2021 Chevy Trail Boss and GMC AT4 trucks, these kits are designed to a higher standard, working within the parameters of the factory suspension and steering geometry to maximize potential while allowing optimal clearance for larger tires. Kits include strut spacers, adventure series upper control arms, hardware packs and steering stop extensions.
- In the box: Strut Spacers Upper Control Arms
- Product Attributes:
- Lift Type: Leveling Kit
- Welding Required: No
- Is Adjustable: No
- Front Lift Method: Strut Spacers & Preload
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Wheel Size: See Notes
- Back Spacing: See Notes
- Front Lift Height: 1.75"
-
Features:
- piece design with top mount spacer and 2 preload spacers to raise ride height without over-extending suspension during droop travel
- High strength adventure series upper control arms allow more travel, increase strength and correct issues caused by kits using the factory UCAs
- Maintains ride quality and handling characteristics
- Allows clearance for 33-34" tires
- Includes Factory Protection Plus
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2019 - Chevrolet Silverado LT | Trail Boss |
- 2" Leveling Kit
- Fitment: Will only fit vehicles that came equipped with a steering stabilizer from the factory. Shocks or Brackets Required: Factory shocks don't allow adequate suspension travel once lifted, shock extension brackets or aftermarket (longer) shocks are strongly recommended.
- Get the look you?ve always wanted with this 2" torsion key leveling kit that allows you to upgrade your tires up to 34". Designed for 2011 - 2019 Chevy or GMC 2500HD /3500HD trucks. Zone Lift Kits: Engineered for Value, Manufactured for Reliability.
- In the box: Torsion Bar Keys
- Product Attributes:
- Front Lift Method: Torsion Key
- Cutting Required: No
- Wheel Size: 17 X 9
- Max Tire Size 3: 295 / 60
- Back Spacing: 6"
- Front Lift Height: 2"
- Max Tire Size 2: 34 X 11.5
- Lift Type: Leveling Kit
- Rear Lift Method: None
- Welding Required: No
- Is Adjustable: No
- Wheel Size 2: 18 X 9
- Wheel Size 3: 20 X 9
- Accommodates Factory Wheels: See Notes
- Back Spacing 2: 6"
- Back Spacing 3: 6"
-
Features:
- bolt-on design for easy installation.
- Castings are resonance frequency tested to ensure they are defect-free and ready to withstand any abuse.
- Levels out the stance of your truck and allows clearance for larger tires to be installed.
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Chevrolet Silverado HD |
- 2" Leveling Kit
- This kit has not been test fitted on Silverado ZR2 or Sierra AT4X models at this time. While it's not necessary on all vehicles, some tire/wheel combinations have tight clearance to the factory control arms. To resolve this Zone Offroad includes a pair of optional weld-on steering stop extensions that can be installed on the lower control arm to limit steering slightly. Stock Wheel and Tires will require 1/4" wheel spacers. (Tight to upper ball joint and arm when turning) 2022 Models: This system has not been tested on models equipped with Super Cruise. Tire and Wheel Fitment: 295/70R17 - Stock Wheel 295/65R18 - Stock Wheel 295/60R20 - Stock Wheel 285/60R20 5" Backspacing
- Level out the stance of your Chevrolet/GMC 1500 truck with this quick and easy to install 2" leveling kit from Zone Offroad. Kit includes high strength top mounted strut spacer, mounting hardware and options weld on steering stops. Get the look your truck deserves, while maintaining ride quality with clearance for up to 34" tires.
- In the box: Strut Spacer - Front
- Product Attributes:
- Lift Type: Leveling Kit
- Welding Required: No
- Is Adjustable: No
- Front Lift Method: Strut Spacers
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Wheel Size: See Notes
- Back Spacing: See Notes
- Front Lift Height: 2"
-
Features:
- Fast and easy install
- Does not change your factory ride
- Easy to follow instructions included
- Grade 8 hardware included
- Long term corrosion resistance
- Optional Steering Stop Extension Included
- Allows clearance for up to 295/70r17 tires
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2020 - GMC Sierra | 4WD |
- 2" Leveling Kit
- Factory wheel/tire combo; Factory 20s with 1/4" wheel spacer with tire size provided in tire sizing chart for 20" wheels. Fitment: Fender Trim Plate Accessories will NOT fit 2007- 2013 model years. Fitment: Will NOT fit 2007 "Classic" models. If you have a 2007 Classic, see kits for comparable 1999-06 models. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Fitment: Will not fit vehicles equipped with Auto-Ride.
- Level out the stance on your Chevrolet/GMC 1500 truck or SUV with these 2" lower strut spacers from Zone Offroad. Designed for quick and easy install along with a precision fit, this kit includes a pair of spacers as well as longer mounting hardware to allow clearance for up to 33" tires.
- In the box: All Necessary Mounting / Installation Hardware Strut Spacer - Front
- Product Attributes:
- Lift Type: Leveling Kit
- Front Lift Method: Strut Spacers
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Wheel Size: Stock
- Back Spacing: Stock
- Front Lift Height: 2"
-
Features:
- Fast and Easy Install
- Solid One-Piece Design
- No Strut Compressor Required and No Disassembly of the Strut
- Does not Change Your Factory Ride
- Easy to Follow Instructions Included
- Great Warranty
- Essentially corrosion proof to outlast your vehicle
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Chevrolet Tahoe |
- 2" Leveling Kit
- Will fit AT4 models. Will fit gas and diesel equipped models.
- A pair of cast iron torsion bar keys are at the heart of this 2" leveling kit that delivers a leveled stance, comfortable ride and handling and clearance for up to 35" tires. Specially engineered to allow re-use of factory shocks with the supplied upper shock extensions, this kit provides more suspension travel without inducing worry of overextending at full droop.
- In the box: Shock Spacers - Front Torsion Bar Keys
- Product Attributes:
- Lift Type: Leveling Kit
- Welding Required: No
- Front Lift Method: Torsion Key
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Rear Lift Height: -
- Wheel Size: Stock
- Back Spacing: Stock
- Front Lift Height: 2"
-
Features:
- Nodular cast iron torsion bar keys featured indexed slot to lift/level stance
- Shock extensions to allow use of factory shocks while properly limiting droop travel
- Torsion bar bolt keepers ensure bolt correct engagement and positioning
- Levels stance and allows clearance for 35" tires
- Quick install with easy to follow instructions
- Includes Factory Protection Plus warranty
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - GMC Sierra HD |
- Adventure Series Upper Control Arm Kit
- C5201 shock relocation brackets should not be used. For leveling kit installations, the new arms should only be paired with the replacement Zone front shock #s 4615 or 7615. Includes a pair (2) of upper control arms. Not designed for use with Zone's 6" kit. Not for use on a stock height vehicle.
- Adventure Series upper control arms dwarf the factory arms they directly replace. Made from fully-welded, 1/8" steel plate with CNC-machined ball joint and bushing mounts, these arms one-up factory components by providing a significantly increased range of travel and work in conjunction with stock-style rubber mount bushings to provide a quiet ride.
- Product Attributes:
- For Use With Lift Heights: 2"-3"
- Vertical Position: Upper
- Horizontal Position: Front
- Welding Required: No
- Is Adjustable: No
- Metal Cutting Required: No
-
Features:
- Improved strength with fully welded plate steel construction
- CNC machined ball joint cup with improved positioning ideal for use with leveling/lift kits
- High quality greaseable ball joints with a protective cap to keep out dirt/debris
- OE style rubber bushings for durability and maintenance-free operation
- Fully assembled and ready to install
- Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2001 - GMC Yukon | XL |
Showing 1 - 10 of 43 products
Loading...