Image
Product
Price
- Upper Control Arm Kit | Adventure Series
- Includes a pair (2) of upper control arms. Only works with 6" Zone kits and 2" Zone leveling kits (included with ZOND70 kit). Do NOT use on 4" Zone kits. Will NOT fit 2013-2018 models equipped with factory adjustable air suspension (Air-Ride)
- Upgrade your truck's factory upper control arms with these high strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are built from high-strength steel, boxed, gusseted and fully welded for strength and rigidity. At the frame mount they use OE style rubber bushings for a long service free life and quiet operation. At the other end these arms feature an indexed ball joint cup designed for use with leveling and lifted applications. High strength ball joints are used with a protective ball joint cap to keep debris out. These upper control arms come fully assembled and ready to bolt in right out of the box.
- In the box: Ball Joints Dust Caps Upper Control Arms
-
Features:
- Improved strength with fully welded plate steel construction
- CNC machined ball joint cup with improved positioning ideal for use with leveling/lift kits
- High quality greaseable ball joints with a protective cap to keep out dirt/debris
- OE style rubber bushings for durability and maintenance-free operation
- Fully assembled and ready to install
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2006 - Dodge Ram | 4WD |
- Control Arm Kit
- Jack / Jack Stands
- Upgrade your Jeeps weak factory stamped steel control arms for to these high strength lower control arms from Zone Offroad. Along with added strength, they offer caster correction and durable rubber bushings for a long life, improved flex and easy installation. Designed for use with 3-4" lift kits.
- In the box: Bushings Control Arms
- Product Attributes:
- For Use With Lift Heights: 3-4"
- Vertical Position: Lower
- Horizontal Position: Front Or Rear
-
Features:
- Designed for improved strength and axle positioning under your 3-4" lifted Jeep TJ
- 1-3/4" x 1/4" DOM steel constructed, formed for proper fitment and finished in durable textured black powdercoat
- Factory style rubber bushings for long, service free operation
- Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Jeep Wrangler TJ/LJ |
- 2" Torsion Key Leveling Kit
- For 1999 old body style trucks, search for 88-98 product listings.
- Deck out the truck you?ve put so much work into. This 2" torsion key leveling kit will give your 1988-2006 Chevy/GM Truck and SUVs the look you want. It?s super easy to install?and, like every Zone kit, is manufactured and inspected for daily-driving reliability.
- In the box: Torsion Bar Keys
- Product Attributes:
- Front Lift Method: Torsion Key
- Cutting Required: No
- Wheel Size: 16 X 8
- Back Spacing: Stock
- Front Lift Height: 2"
- Max Tire Size 2: 285 X 65
- Lift Type: Leveling Kit
- Rear Lift Method: None
- Welding Required: No
- Is Adjustable: No
- Wheel Size 2: 17 X 9
- Accommodates Factory Wheels: Yes
- Back Spacing 2: 6"
-
Features:
- bolt-on design for easy installation.
- Levels out the stance of your truck and allows clearance for larger tires to be installed.
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2006 - Chevrolet Silverado | 4WD |
- Add-A-Leaf Kit
- Jack / Jack Stands
- Need a little extra boost in the rear of your truck? This add-a-leaf kit will provide additional lift in the rear while maintaining ride quality and increasing load capacity.
- In the box: Add-A-Leaf's Center Pins Leaf Spring Alignment Clamps
- Product Attributes:
- Horizontal Position: Rear
- Number of Leafs: 1
- Pin Size: 9/16"
- Center Pin Size: 0.375
- Free Height: 6.75
-
Features:
- Includes a pair of add-a-leafs, center pins, and alignment clamps
- Retains ride quality while increasing ride height and load capacity
- Includes easy to follow instructions
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - GMC Sierra |
- 2.5" Adventure Series Leveling Kit
- The kit allows the clearance for 33-35" tires to be installed. UCA's Required: Do NOT install spacer kit without upper control arms, the factory upper ball joint will be extended past operating range. Vehicle damage may occur.
- Level out your RAM 1500 the right way with Zone Offroad. In addition to these steel fabricated top mounted strut spacers and preload spacers designed for 2.5" of lift, these kits address the limitations of the factory upper ball joint (maxed out with a leveling kit installed which will lead to premature wear) by upgrading to adventure series upper control arms (UCAs). These fully boxed and welded UCAs offer superior strength and performance and use an indexed ball joint cup designed for more droop travel. Also included are differential relocation brackets to correct CV operating angles.
- In the box: All Necessary Mounting / Installation Hardware Differential Relocation Brackets Strut Spacer - Front Upper Control Arms
-
Features:
- Combination upper strut spacer and preload spacer to ensure proper lift height
- Upper strut spacer is pitched, offset, and rotated to ensure proper fitment and positioning with the factory strut
- Powder-coated steel upper strut spacers for long lasting durability
- Fully welded, heavy duty upper control arms that dwarf the factory arms.
- CNC-machined UCalifornia bushing and ball joint cups.
- OE rubber bushings and greasable factory style ball joints for quiet, reliable, and low maintenance operation.
- Improved UCalifornia range of motion compared to stock arms
- Full 2" differential drop included to achieve proper CV angles at ride height and to eliminate "lobing" of the CVs at full droop
- UCalifornia ball joint position adjusted to keep arm in a neutral position with 2-3" of lift.
- UCAs utilize replaceable ball joints - replacements are readily available from most auto parts stores when needed many miles down the road.
- Can be installed as a 2" or 2.5" kit
- Avoids ball joint binding issue commonl
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2006 - Dodge Ram | 4WD |
- Transfer Case Indexing Ring Kit
- Pitman Arm Puller
- Avoid post-lift front-end vibration with help from this transfer case indexing kit. Typically used on Dodge trucks with 6" of lift, "indexing" the front driveshaft effectively reduces the shaft's working angle to eliminate vibration.
- In the box: All Necessary Mounting / Installation Hardware Driveshaft Spacer Transfer Case Indexing Ring
- Product Attributes:
- For Use With Lift Heights: 6
-
Features:
- Ring indexing the transfer case to improve front driveline operating angle once lifted
- Thin design to maintain optimal spline engagement
- Strong ARP-brand mounting studs ensure fitment
- CNC machined billet aluminum front driveshaft spacer for proper engagement
- New output seal and seal extension included
- Compatible with most 6-8" lift kits to eliminate front driveline vibrations
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2006 - Dodge Ram | 4WD |
Showing 1 - 7 of 7 products
Loading...