Image
Product
Price
- 2" Leveling Kit
- Factory wheel/tire combo; Factory 20s with 1/4" wheel spacer with tire size provided in tire sizing chart for 20" wheels. Fitment: Fender Trim Plate Accessories will NOT fit 2007- 2013 model years. Fitment: Will NOT fit 2007 "Classic" models. If you have a 2007 Classic, see kits for comparable 1999-06 models. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Fitment: Will not fit vehicles equipped with Auto-Ride.
- Level out the stance on your Chevrolet/GMC 1500 truck or SUV with these 2" lower strut spacers from Zone Offroad. Designed for quick and easy install along with a precision fit, this kit includes a pair of spacers as well as longer mounting hardware to allow clearance for up to 33" tires.
- In the box: All Necessary Mounting / Installation Hardware Strut Spacer - Front
- Product Attributes:
- Lift Type: Leveling Kit
- Front Lift Method: Strut Spacers
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Wheel Size: Stock
- Back Spacing: Stock
- Front Lift Height: 2"
-
Features:
- Fast and Easy Install
- Solid One-Piece Design
- No Strut Compressor Required and No Disassembly of the Strut
- Does not Change Your Factory Ride
- Easy to Follow Instructions Included
- Great Warranty
- Essentially corrosion proof to outlast your vehicle
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Chevrolet Silverado |
- Adventure Series Upper Control Arm Kit
- C5201 shock relocation brackets should not be used. For leveling kit installations, the new arms should only be paired with the replacement Zone front shock #s 4615 or 7615. Includes a pair (2) of upper control arms. Not designed for use with Zone's 6" kit. Not for use on a stock height vehicle.
- Adventure Series upper control arms dwarf the factory arms they directly replace. Made from fully-welded, 1/8" steel plate with CNC-machined ball joint and bushing mounts, these arms one-up factory components by providing a significantly increased range of travel and work in conjunction with stock-style rubber mount bushings to provide a quiet ride.
- Product Attributes:
- For Use With Lift Heights: 2"-3"
- Vertical Position: Upper
- Horizontal Position: Front
- Welding Required: No
- Is Adjustable: No
- Metal Cutting Required: No
-
Features:
- Improved strength with fully welded plate steel construction
- CNC machined ball joint cup with improved positioning ideal for use with leveling/lift kits
- High quality greaseable ball joints with a protective cap to keep out dirt/debris
- OE style rubber bushings for durability and maintenance-free operation
- Fully assembled and ready to install
- Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - GMC Sierra HD |
- Transfer Case Indexing Ring Kit - For 6-Bolt TC's
- Fits 6-Bolt Transfer Case Models Only. Gas models may require modification to the front exhaust crossover pipe on driver side for proper clearance.
- This transfer case indexing kit repositions the front output flange to eliminate driveline vibrations that can occur at taller lift heights. Featuring a thinner design to maximize spline engagement and improve front driveline angles on 6-bolt transfer case equipped Ram trucks, the included driveshaft spacer allows re-use of the factory front driveshaft with 6-8" lift kits.
- In the box: All Necessary Mounting / Installation Hardware Driveshaft Spacer Transfer Case Indexing Ring
- Product Attributes:
- For Use With Lift Heights: Any
-
Features:
- Ring indexing the transfer case to improve front driveline operating angle once lifted
- Ultra-thin design to maintain optimal spline engagement
- Strong ARP-brand mounting studs ensure fitment
- CNC machined billet aluminum front driveshaft spacer for proper engagement
- Compatible with most 6-8" lift kits to eliminate front driveline vibrations
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Dodge Ram |
- 1.5" Body Lift Kit
- Bumper hitch? Rear bumper brackets are for appearance only and not rated for towing. Frame mounted tow hitches are recommended for towing purposes. Fitment: Will NOT fit Mega Cab models.
- Give your Dodge Ram 1500 truck that extra boost for larger tires while maintain the ride quality and handling characteristics with this 1.5" body lift from Zone Offroad. This kit raises the body and bumpers up off the frame to allow clearance for larger tires while maintaining factory body lines and installing quickly and easily. It includes indestructible body mount blocks, high quality hardware, bumper brackets, bed support spacers and more.
- In the box: Indestructible Body Lift Blocks
- Product Attributes:
- Lift Type: Body Lift
- Rear Lift Method: Body Lift
- Front Lift Method: Body Lift
- Rear Lift Height: 1.5"
- Wheel Size: Stock
- Back Spacing: Stock
- Front Lift Height: 1.5"
-
Features:
- Indestructible body lift blocks and high strength body mount hardware
- Front and rear bumper relocation brackets to maintain factory body lines
- Maintains factory ride quality and allows clearance for larger tires
- Much easier/quicker to install than taller body lifts
- Increase tire clearance with an affordable body lift kit. The design essentially increases the space between your vehicle's body and its frame. While this approach does not substantially increase ground clearance, it may help you fit the right set of tires and may be used in conjunction with a lift kit.Kits include heavy-duty spacers and hardware as well as application-specific solutions to complete the installation.
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Dodge Ram |
- Dual Add-A-Leaf Kit
- Jack / Jack Stands
- Need a little extra boost in the rear of your truck. This dual add-a-leaf kit will provide additional lift in the rear while maintaining ride quality and increasing load capacity.
- In the box: Add-A-Leaf's Center Pins Leaf Spring Alignment Clamps
- Product Attributes:
- Horizontal Position: Rear
- Number of Leafs: 2
- Pin Size: N/a
- Length: 46-1/4"
- Width: 3"
- Center Pin Size: 0.438
- Free Height: 8
-
Features:
- Includes (4) add-a-leafs (2 per side), longer center pins, and alignment clamps
- Retains ride quality while increasing ride height and load capacity
- Includes easy to follow instructions
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Ford F-350 Super Duty |
- Dual Steering Stabilizer Kit
- 2"+ of additional bump stop required (included with most lift kits). Brackets designed for stock axle and steering linkage.
- While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality dual steering stabilizer systems are designed to improve tire wear and front end component life as well as lessen side to side motion caused by wide tires and unpredictable road conditions. Kits include cylinders, brackets and mounting hardware.
- In the box: All Necessary Mounting / Installation Hardware Bushings Dual Steering Stabilizer Cylinders
- Product Attributes:
- For Use With Lift Heights: Over 4"
-
Features:
- Helps control front end shimmy caused by oversized wheels/tires
- Extends life of front end steering components
- Dual heavy duty cylinder construction
- Mounts stabilizers end-to-end
- Mounting brackets and hardware included
- Zone Offroad offers Nitro Series Steering Stabilizers in single and dual configurations as well as FOX ATS Steering Stabilizers for Chevrolet / GMC, Ford, RAM, Dodge trucks as well as Jeeps. Benefits include improved steering feel and heavy-duty shafts. Zone Nitro Series Steering Stabilizers feature twin-tube design and steel body construction for affordable performance. Bolt-on design. Made in the USA.
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Jeep Wrangler JK |
- Upper Control Arm Kit | Adventure Series
- Includes a pair (2) of upper control arms. Only works with 6" Zone kits and 2" Zone leveling kits (included with ZOND70 kit). Do NOT use on 4" Zone kits. Will NOT fit 2013-2018 models equipped with factory adjustable air suspension (Air-Ride)
- Upgrade your truck's factory upper control arms with these high strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are built from high-strength steel, boxed, gusseted and fully welded for strength and rigidity. At the frame mount they use OE style rubber bushings for a long service free life and quiet operation. At the other end these arms feature an indexed ball joint cup designed for use with leveling and lifted applications. High strength ball joints are used with a protective ball joint cap to keep debris out. These upper control arms come fully assembled and ready to bolt in right out of the box.
- In the box: Ball Joints Dust Caps Upper Control Arms
-
Features:
- Improved strength with fully welded plate steel construction
- CNC machined ball joint cup with improved positioning ideal for use with leveling/lift kits
- High quality greaseable ball joints with a protective cap to keep out dirt/debris
- OE style rubber bushings for durability and maintenance-free operation
- Fully assembled and ready to install
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2009 - Dodge Ram | 4WD |
- Carrier Bearing Drop Kit
- Carrier bearing drop kits eliminate driveshaft vibrations in your lifted truck by correcting rear drive shaft angles. These steel carrier bearing drop kits are powder-coated for durability and include mounting hardware for a complete install.
- Product Attributes:
- For Use With Lift Heights: Any
-
Features:
- Repositions the carrier bearing to more closely mimic the factory operating angle to eliminate rear driveline vibrations on lifted applications with 2-piece rear driveshafts
- Mounting hardware included
- Eliminate unwanted driveshaft vibrations in your lifted truck with a Zone Offroad Carrier Bearing Drop Kit. Available for Ford, Chevrolet, GMC, RAM, Dodge and Toyota trucks, the design corrects rear driveshaft angles by re-positioning the carrier bearing assembly as needed. Proper driveline angle is critical for a safe, reliable driveshaft and U-Joint function. All Carrier Bearing Drop Kits are powder-coated for durability and include mounting hardware for a complete, easy install.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2009 - Ford F-350 Super Duty | 4WD |
- Oversized Spare Tire Mount Bracket Extension
- None
- Want a larger spare tire on your Jeep, but it won't fit on the stock bracket? This bracket moves the tire mounting point up 1-1/2" and out 1-3/16", allowing you to mount up to a 37" tire.
- In the box: All Necessary Mounting / Installation Hardware All Necessary Mounting / Relocation Brackets
-
Features:
- Repositions factory spare tire mounting location up and out for compatibility with oversized tires
- Built front 3/16" steel, welded and finished in textured black powdercoat
- Easy bolt-on installation that maintains factory 5 on 5" bolt pattern
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Jeep Wrangler JK |
- Carrier Bearing Drop Kit
- Will not fit Raptor models.
- Carrier bearing drop kits eliminate driveshaft vibrations in your lifted truck by correcting rear driveshaft angles. These steel carrier bearing drop kits are powder-coated and zinc coated for durability and include mounting hardware for a complete install.
- In the box: All Necessary Mounting / Relocation Brackets
-
Features:
- Adjustable design allowing 1/8? to 2? carrier bearing drop
- Improves rear driveline angle for lifted trucks with 2-piece rear driveshaft
- Easy to install bolt-on design
- All hardware included
- Eliminate unwanted driveshaft vibrations in your lifted truck with a Zone Offroad Carrier Bearing Drop Kit. Available for Ford, Chevrolet, GMC, RAM, Dodge and Toyota trucks, the design corrects rear driveshaft angles by re-positioning the carrier bearing assembly as needed. Proper driveline angle is critical for a safe, reliable driveshaft and U-Joint function. All Carrier Bearing Drop Kits are powder-coated for durability and include mounting hardware for a complete, easy install.
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Ford F-150 |
Showing 1 - 10 of 17 products
Loading...