2023 Jeep Driveline and Axles Parts
Choose a Model for your 2023 Jeep
Image
Product
Price
- Front or Rear
- Axle Locker Sensor Connector; Front or Rear;
- Axle Locker Sensor Connector
-
Features:
- Axle Locker Sensor Connector
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Jeep Gladiator | Willys |
- Rear Wheel Bearing and Hub Assembly
- MOOG 512685 Rear Wheel Bearing and Hub Assembly for Jeep Grand Cherokee L
-
Features:
- EXTENDED SERVICE LIFE -- Application-specific advanced raceway design reduces stress, rotation and heat on components
- EASY TO INSTALL -- Engineered and designed for fast, hassle-free installation
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- GRIME DEFENSE OUTBOARD SEAL -- Revolutionary seal helps prevent water, dirt and road grime from building up on assembly exterior and shields bearings from friction- and corrosion-causing moisture and grime
- KEEPS WATER AND DIRT OUT -- Primary outboard and inboard seals help protect against damaging water, dirt and debris
- RELIABLE PERFORMANCE -- Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear (where applicable)
- CORROSION PROTECTION -- Application-specific coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
63948K, 68346852AA
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Grand Cherokee | Rear |
- Rear Front Wheel Bearing and Hub Assembly
- with Off Road Suspension
- MOOG 512513 Rear Front Wheel Bearing and Hub Assembly for Jeep Cherokee
- Product Attributes:
- Flange Bolt Hole Quantity: 4
- Anti Lock Brake Sensor Included: Yes
- Brake Pilot Diameter: 69.900
- Flange Offset: 48.600
- Bolt Circle Diameter: 110.100
- Hub Pilot Diameter: 91.900
- Wheel Pilot Diameter: 64.900
- Spline Quantity: 32
- Flange Diameter: 130.200
- Wheel Stud Quantity: 5
-
Features:
- RELIABLE PERFORMANCE -- Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE -- Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT -- Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL -- Engineered and designed for fast, hassle-free installation
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2023 - Jeep Cherokee | Front | AWD |
- Rear Front Wheel Bearing and Hub Assembly
- MOOG 512513 Rear Front Wheel Bearing and Hub Assembly for Jeep Cherokee
- Product Attributes:
- Flange Bolt Hole Quantity: 4
- Anti Lock Brake Sensor Included: Yes
- Brake Pilot Diameter: 69.900
- Flange Offset: 48.600
- Bolt Circle Diameter: 110.100
- Hub Pilot Diameter: 91.900
- Wheel Pilot Diameter: 64.900
- Spline Quantity: 32
- Flange Diameter: 130.200
- Wheel Stud Quantity: 5
-
Features:
- RELIABLE PERFORMANCE -- Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE -- Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT -- Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL -- Engineered and designed for fast, hassle-free installation
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
04779869AA, 04779869AB, 04779869AC, 40158001, 4779869AA, 4779869AB, 4779869AC, BR930899, G25313, HA590576, HA590585, MB25313, VKBA6660, WE61827
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2023 - Jeep Cherokee | Rear | 4WD |
- Wheel Hub And Bearing Assembly - Front, Rear
- Product Attributes:
- Flange Bolt Hole Diameter: 117
- Flange Offset: 48.5
- Anti Lock Braking System Type:
- Codificador
- Encoder
- Mounting Hardware Included:
- No
- Non
- Flange Bolt Hole Quantity: 4
- Drive Type:
- Driven
- Impulsado
- Flange Bolts Included:
- No
- Non
- Wheel Studs Included:
- No
- Non
- Material:
- Acero
- Steel
- Flange Included:
- Oui
- Sí
- Yes
- Wheel Stud Size: M12 X 1.25
- Bolt Circle Diameter: 110 Mm
- Connector Quantity: 0
- Spline Quantity: 32
- Wheel Stud Quantity: 5
- Brake Pilot Diameter: 70
- Anti Lock Brake Sensor Included:
- Oui
- Sí
- Yes
- Anti Lock Braking System:
- Oui
- Sí
- Yes
- Flange Shape: Rectangular
- Wheel Pilot Diameter: 65
- Contenidos del paquete: 1 Ensamble De Maza (hub)
- Bearing Type:
- Ball
- Rótula
- Knuckle Pilot Hole Diameter: 92
- Flange Diameter: 130.2
-
Features:
- Complete repair - this assembly includes the wheel hub and application-specific bearing components
- Saves time - eliminates work required to remove individual corroded components
- Reliable fit - precision-engineered to match the dimensions of original equipment
- Trustworthy quality - engineered and tested in the United States
- This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
This Part Fits the Following OEM/Substitute Numbers:
103156, 121576, 4779869AC, 512513, BR930899, HA590576, MB25313, WE61827
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2023 - Jeep Cherokee | Rear | AWD |
- Wheel Hub And Bearing Assembly - Front, Rear
- w/Off Road Suspension
- Product Attributes:
- Flange Bolt Hole Diameter: 117
- Flange Offset: 48.5
- Anti Lock Braking System Type:
- Codificador
- Encoder
- Mounting Hardware Included:
- No
- Non
- Flange Bolt Hole Quantity: 4
- Drive Type:
- Driven
- Impulsado
- Flange Bolts Included:
- No
- Non
- Wheel Studs Included:
- No
- Non
- Material:
- Acero
- Steel
- Flange Included:
- Oui
- Sí
- Yes
- Wheel Stud Size: M12 X 1.25
- Bolt Circle Diameter: 110 Mm
- Connector Quantity: 0
- Spline Quantity: 32
- Wheel Stud Quantity: 5
- Brake Pilot Diameter: 70
- Anti Lock Brake Sensor Included:
- Oui
- Sí
- Yes
- Anti Lock Braking System:
- Oui
- Sí
- Yes
- Flange Shape: Rectangular
- Wheel Pilot Diameter: 65
- Contenidos del paquete: 1 Ensamble De Maza (hub)
- Bearing Type:
- Ball
- Rótula
- Knuckle Pilot Hole Diameter: 92
- Flange Diameter: 130.2
-
Features:
- Complete repair - this assembly includes the wheel hub and application-specific bearing components
- Saves time - eliminates work required to remove individual corroded components
- Reliable fit - precision-engineered to match the dimensions of original equipment
- Trustworthy quality - engineered and tested in the United States
- This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Cherokee | Front |
- Hub And Bearing Mounting Bolts
- Package Quantity: 4
- Product Attributes:
- Bolt Grade: 10.9
- Hex Size: 18 Mm
- Thread Type:
- Media
- Medium
- Thread Diameter: 14
- Contenidos del paquete: 4 Pernos
- Material:
- Acero Al Carbono
- Carbon Steel
-
Features:
- Direct replacement - these wheel hub bolts are designed to match the performance of the original bolts on specified vehicles
- Ideal solution - made of durable materials to reliably replace bolts with rounded-off or damaged threads
- Application-specific - precision-manufactured to securely mount the hub to the vehicle knuckle/spindle
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- Wheel hub bolts rounded off or have damaged threads? These wheel hub bolts are designed to match the performance of original equipment bolts to secure the hub to the knuckle/spindle on specified vehicles.
This Part Fits the Following OEM/Substitute Numbers:
5086661AA
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Grand Cherokee L | Rear |
- Ultimate Dana 60 Semi-Float Rear JL 4.88 ELD - 69 inch width
- With Electronic Locking Differential with Ultimate Dana 60 Axle 69in Width Semi-Floating with 4.88 Gear Ratio with Ultimate Dana 60 Rear Axle
- FSGR
- The Ultimate Dana 60 is a direct-fit solution for the ultimate off road performace. Upgrade from a stock semi-float and get all the benefits of the celebrated Ultimate Dana 60® axle—like Spicer® chromoly steel axle shafts, a nodular iron diff cover, heavy-duty brackets, and more—while reusing your existing wheels.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Wrangler | Rear |
- For Dana 44
- Motive Gear - Differential Pinion Seal
- Differential Pinion Seal
- Product Attributes:
- Differential Case Design Type:
- Dana 30 Jl Reverse
- Dana 44 Jk
- Dana 44 Jk Reverse
- Dana Advantek M186
- Taxonomy C: Pinion Seals
- Housing Bore: 3.16
- Inside Diameter: 1.875
- Taxonomy A:
- Bearings And Seals
- Ld Differential
- Taxonomy B: Seals
- App/Model:
- Dana 30 Jl Reverse
- Dana 44 Jk
- Dana 44 Jk Reverse
- Dana Advantek M186
- Material: Fluoroelastomer
- Differential Case Design Type:
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
18870A, 2004101, 50637, 5183524AA, 710877, YMS54458
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Wrangler | Rear |
- For Dana 30 JL
- Motive Gear - Differential Pinion Seal
- Differential Pinion Seal
- Product Attributes:
- Differential Case Design Type:
- Dana 30 Jl Reverse
- Dana 44 Jk
- Dana 44 Jk Reverse
- Dana Advantek M186
- Taxonomy C: Pinion Seals
- Housing Bore: 3.16
- Inside Diameter: 1.875
- Taxonomy A:
- Bearings And Seals
- Ld Differential
- Taxonomy B: Seals
- App/Model:
- Dana 30 Jl Reverse
- Dana 44 Jk
- Dana 44 Jk Reverse
- Dana Advantek M186
- Material: Fluoroelastomer
- Differential Case Design Type:
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Wrangler | Front | Unlimited Sport Altitude |
Showing 1 - 10 of 45 products
Loading...