Shop By Product Matching "AMO"

Choose a Model for your 2022 Toyota


Showing 1 - 10 of 265 products
Image
SKU
Product
Rating
Price

Eibach
  • EIB Pro-Truck Lift Kits
  • Eibach Pro-Truck-Lift Stage 2 16-20 Toyota Tacoma 2WD/4WD
  • Product Attributes:
    • (WSM) Web Category Description: Coilovers
    • (WSM) Clean Prod Desc: Pro-truck-coilover-stage-2
    • (WSM) Category Display Order: 498
  • Features:
    • Stage 2 system featuring Pro-Truck-Coilover 2.0's + Rear Sport Shocks
    • Front Adjustable Threaded Spring Perch to Accommodate Increased Loads and Maximum Clearance. ERO Off-Road Race Spring Equipped and Compatible.
    • Anodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
    • Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
    • Engineered, Tested and Manufactured by Eibach in the U.S.A.
  • The PRO-TRUCK-LIFT STAGE 2 System shares the same rear components (lift springs, sport shocks, air bag delete) as our STAGE 1 system with an upgrade in adjustability up front. The front 2.0 coilovers were developed utilizing our extended-travel mono tube design and variable force valving that delivers control during on-road transit and compliance for maximum traction on the trails.

Additional Fitment Information:
Vehicle Sub Model
2022 - Toyota Tacoma SR5

Eibach
  • EIB Pro-Truck Coilovers
  • Eibach Pro-Truck Coilover 2.0 Front for 10-20 Toyota 4Runner 2WD/4WD
  • Pair of Front Coilovers
  • Product Attributes:
    • Adjustable Ride Height: Yes
  • Features:
    • Pre-Assembled, Factory Direct Replacement Front Coilover - No Additional Parts Required. Sold in Pairs.
    • Adjustable Threaded Spring Perch to Accommodate Increased Loads and Maximum Clearance. ERO Off-Road Race Spring Equipped and Compatible.
    • Anodized 6061-T6 Billet Aluminum Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
    • Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
    • Engineered, Tested and Manufactured by Eibach in the U.S.A.

Additional Fitment Information:
Vehicle Position Drive Type
2022 - Toyota 4Runner Front 4WD

Eibach
  • EIB Pro-Truck Coilovers
  • Eibach Pro-Truck Coilover Stage 2R 10-22 Toyota 4Runner 2WD/4WD
  • Pair of Front Coilovers + Rear Reservoir Shocks + Rear Springs
  • Product Attributes:
    • Reservoir rear shocks: Yes
  • Features:
    • Stage 2 system featuring Pro-Truck-Coilover 2.0's + Pro-Truck Reservoir Sport Shocks + Pro-Lift-Kit Springs
    • Height Adjustable Front Coilover and External Reservoir Rear Shocks for Increased Off-Road Performance
    • Anodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
    • Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
    • Engineered, Tested and Manufactured by Eibach in the U.S.A.
  • Height Adjustable Front Coilover and External Reservoir Rear Shocks for Increased Off-Road Performance

Additional Fitment Information:
Vehicle
2022 - Toyota 4Runner

Genuine
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • with Standard Suspension
  • Rear

Additional Fitment Information:
Vehicle Position
2022 - Toyota 4Runner Rear

Genuine
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • with Sport Suspension
  • Rear

Additional Fitment Information:
Vehicle Position Sub Model
2022 - Toyota 4Runner Rear Limited

Genuine
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • with Dynamic Suspension
  • Rear

Additional Fitment Information:
Vehicle Position Sub Model
2022 - Toyota 4Runner Rear Venture

ICON Vehicle Dynamics
  • Use Up To 33 (in) x 11.50 (in) Tires Rear Raise Height 1.5 (in) Requires Removal of OE Leaf Spring Overload Leaves ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
  • The ICON Add-A-Leaf kit is a great way to lift the rear of your 96-23 Tacoma or 00-06 Tundra while also improving rear end ride quality. Simply remove the factory overload spring, bolt up the kit, and say goodbye to that rough factory ride.
  • 96-23 TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
  • Product Attributes:
    • AAP_UDA_12: Ea
    • AAP_UDA_22: 1
    • Helper Spring: No
    • Leaf Width: 2.5
    • Grade Type: Performance
    • Mounting Hardware Included: Yes
    • Leaf Quantity: 3
    • U Bolts Included: Yes
    • California Prop 65 Warning: Yes
    • AAP_UDA_4: 55
    • Maximum Lift: 1.5
    • Axle Modification Needed: No
    • Suspension Grade Type: Performance
    • Axle Orientation: Rear
    • Material: Steel
  • Features:
    • Provides 1.5” of lift on stock weight rear end
    • Lowers rear spring rate for smoother ride quality
    • Uses high-quality progressive rate, lifetime guaranteed leaf springs
    • Includes U-bolts and required hardware
    • Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
  • The ICON Vehicle Dynamics Progressive Add-A-Leaf kit is a great way to lift the rear of your 1996-2023 Toyota Tacoma or 2000-2006 Toyota Tundra while also improving rear end ride quality. Installing in place of the factory overload leaves, this kit effectively lowers the rear spring rate by approximately 10% for a more compliant ride. This three-leaf progressive rate Add-A-Leaf Kit comes complete with U-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.

Additional Fitment Information:
Vehicle Position Sub Model
2022 - Toyota Tacoma Rear Trail

ICON Vehicle Dynamics
  • Use Up To 33 (in) x 11.50 (in) Tires Requires Removal of OE Leaf Spring Overload Leaves Raises Rear 1 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
  • The ICON Add-A-Leaf kit is a great way to lift the rear of your 96-23 Tacoma or 00-06 Tundra while also improving rear end ride quality. Simply remove the factory overload spring, bolt up the kit, and say goodbye to that rough factory ride.
  • 96-23 TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
  • Product Attributes:
    • AAP_UDA_12: Ea
    • AAP_UDA_22: 1
    • Helper Spring: No
    • Leaf Width: 2.5
    • Grade Type: Performance
    • Mounting Hardware Included: Yes
    • Leaf Quantity: 3
    • U Bolts Included: Yes
    • California Prop 65 Warning: Yes
    • AAP_UDA_4: 55
    • Maximum Lift: 1.5
    • Axle Modification Needed: No
    • Suspension Grade Type: Performance
    • Axle Orientation: Rear
    • Material: Steel
  • Features:
    • Provides 1.5” of lift on stock weight rear end
    • Lowers rear spring rate for smoother ride quality
    • Uses high-quality progressive rate, lifetime guaranteed leaf springs
    • Includes U-bolts and required hardware
    • Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
  • The ICON Vehicle Dynamics Progressive Add-A-Leaf kit is a great way to lift the rear of your 1996-2023 Toyota Tacoma or 2000-2006 Toyota Tundra while also improving rear end ride quality. Installing in place of the factory overload leaves, this kit effectively lowers the rear spring rate by approximately 10% for a more compliant ride. This three-leaf progressive rate Add-A-Leaf Kit comes complete with U-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.

Additional Fitment Information:
Vehicle Position Sub Model
2022 - Toyota Tacoma Rear TRD Pro

ICON Vehicle Dynamics
  • Use Up To 33 (in) x 11.50 (in) Tires Rear Raise Height 1.5 (in) Requires Removal of OE Leaf Spring Overload Leaves Raises Rear 1.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
  • The ICON Add-A-Leaf kit is a great way to lift the rear of your 96-23 Tacoma or 00-06 Tundra while also improving rear end ride quality. Simply remove the factory overload spring, bolt up the kit, and say goodbye to that rough factory ride.
  • 96-23 TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
  • Product Attributes:
    • AAP_UDA_12: Ea
    • AAP_UDA_22: 1
    • Helper Spring: No
    • Leaf Width: 2.5
    • Grade Type: Performance
    • Mounting Hardware Included: Yes
    • Leaf Quantity: 3
    • U Bolts Included: Yes
    • California Prop 65 Warning: Yes
    • AAP_UDA_4: 55
    • Maximum Lift: 1.5
    • Axle Modification Needed: No
    • Suspension Grade Type: Performance
    • Axle Orientation: Rear
    • Material: Steel
  • Features:
    • Provides 1.5” of lift on stock weight rear end
    • Lowers rear spring rate for smoother ride quality
    • Uses high-quality progressive rate, lifetime guaranteed leaf springs
    • Includes U-bolts and required hardware
    • Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
  • The ICON Vehicle Dynamics Progressive Add-A-Leaf kit is a great way to lift the rear of your 1996-2023 Toyota Tacoma or 2000-2006 Toyota Tundra while also improving rear end ride quality. Installing in place of the factory overload leaves, this kit effectively lowers the rear spring rate by approximately 10% for a more compliant ride. This three-leaf progressive rate Add-A-Leaf Kit comes complete with U-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.

Additional Fitment Information:
Vehicle Position Sub Model
2022 - Toyota Tacoma Rear SR

Eibach
  • EIB Pro-Truck Lift Kits
  • Eibach Pro-Truck Coilover Stage 2R (Front Coilovers + Rear Shocks) for 16-22 Toyota Tacoma 2WD/4WD
  • Pair of Front Coilovers + Rear Reservoir Shocks
  • Features:
    • Stage 2 system featuring Pro-Truck-Coilover 2.0's + Pro-Truck Reservoir Sport Shocks
    • Height Adjustable Front Coilover and External Reservoir Rear Shocks for Increased Off-Road Performance
    • Anodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
    • Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
    • Engineered, Tested and Manufactured by Eibach in the U.S.A.
  • The PRO-TRUCK Sport Shock is the perfect solution for those looking for a straightforward, reliable damper setup that gains ground clearance, ride comfort and additional travel without requiring any additional suspension components. For optimal performance, PRO-TRUCK Sport Shocks are designed to be used in conjunction with Eibach PRO-LIFT-KIT springs.

Additional Fitment Information:
Vehicle
2022 - Toyota Tacoma
Showing 1 - 10 of 265 products

Loading...