Shop By Product Matching "Exhaust"
Choose a Model for your 1985 Ford
Image
Product
Price
- Exhaust Gasket-FORD V8, 289-351 Windsor, Lg SqPt
- "Suggested Torque: 20 Ft Lbs; 1-1/4"" x 1-5/8"" Large Square Port; (Use w/Aftermarket Cylinder Heads - Fits AFR, GT40); Fits Cylinder Heads with 2"" BH Spacings on Each Port; Header Applications; 2pc Set"
- V8 - 289-351 Windsor,1-1/4" x 1-5/8" Large Sq Port, (Use w/aftermarket Cylinder Heads - Fits AFR, GT40) Fits Cylinder Heads with 2" BH Spacings on Each Port, Header Applications 2/Set
- Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Material: Graphite
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Ford E-150 Econoline |
- Exhaust Gasket-FORD V8, 289-351 Windsor, Lg SqPt
- Suggested Torque: 20 Ft Lbs; 1-1/4" x 1-5/8" Large Sq Port, (Use w/aftermarket Cylinder Heads - Fits AFR, GT40) Fits Cylinder Heads with 2" BH Spacings on Each Port, Header Applications 2/Set
- V8 - 289-351 Windsor,1-1/4" x 1-5/8" Large Sq Port, (Use w/aftermarket Cylinder Heads - Fits AFR, GT40) Fits Cylinder Heads with 2" BH Spacings on Each Port, Header Applications 2/Set
- Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Material: Graphite
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine Version | CID |
|---|---|---|---|---|---|
| 1985 - Ford F-150 | V | 5753 | 8 Cyl 5.8L | Windsor | 351 |
- Exhaust Gasket-FORD V8,302-351 Windsor, Sq Pt
- Suggested Torque: 20 Ft Lbs; 1-1/8"w x 1-1/2"h Square Stock Port; Manifold or Headers; 2/Set
- V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8"w x 1-1/2"h Square Stock Port, Manifold or Headers, 2/Set
- Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Material: Graphite
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
- Exhaust Gasket-FORD V8,302-351 Windsor, Sq Pt
- "Suggested Torque: 20 Ft Lbs; 1-1/8"" (w) x 1-1/2"" (h) Square Stock Port; Manifold or Headers; 2pc Set"
- V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8"w x 1-1/2"h Square Stock Port, Manifold or Headers, 2/Set
- Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Material: Graphite
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Ford E-350 Econoline |
- Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.
- Ultra Seal Exhaust Gasket Set; Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.;
- Ultra Seal Exhaust Gasket Set
- Product Attributes:
- Gasket Line: Ultra-seal
- WARNING CA Proposition 65: No
- Port Shape: Rectangle
- Collector Gaskets Included: No
- Engine Make/Size: Ford Small Block Windsor
- Port Size: 1.120 In. X 1.480 In.
-
Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-Stick Properties
- Easy Removal For Disassembly
- Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
This Part Fits the Following OEM/Substitute Numbers:
1415
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine Version | CID |
|---|---|---|---|---|---|
| 1985 - Ford F-150 | V | 5753 | 8 Cyl 5.8L | Windsor | 351 |
- Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.
- Ultra Seal Exhaust Gasket Set; Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.;
- Ultra Seal Exhaust Gasket Set
- Product Attributes:
- Gasket Line: Ultra-seal
- WARNING CA Proposition 65: No
- Port Shape: Rectangle
- Collector Gaskets Included: No
- Engine Make/Size: Ford Small Block Windsor
- Port Size: 1.120 In. X 1.480 In.
-
Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-Stick Properties
- Easy Removal For Disassembly
- Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Ford F-250 | V | - | 8 Cyl 5.0L | 302 |
- Standard Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Ford Bronco | L | 4917 | Front | 6 Cyl 4.9L | 300 |
- Standard Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Ford Mustang | V | - | Rear | 6 Cyl 3.8L | 232 |
- Standard Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required Oval Shaped Clam-Shell
- Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Fuel Delivery Type | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 1985 - Ford F-250 | V | - | Front | 8 Cyl 5.0L | CARB | F | 302 |
- Exhaust Manifold Gasket Set
- Reinstall original heat shield with Oval Exhaust Ports
- FEL-PRO MS 90291 Exhaust Manifold Gasket Set for Ford F-250
- Product Attributes:
- : Gasket For Use W/old Heat Shield; Oval Ports
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
111014201, 18032, 18059, 654739, D4VY9448A, D4VY9448B, E5HE9A457AC, E5HE9A457AD, E5HZ9448A, EMS512, MS15175, MS3651, MS3792, MS3892
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Ford B-700 | V | - | 8 Cyl 6.1L | 370 |
Showing 1 - 10 of 120 products
Loading...