Shop By Product Matching "Gates"
Image
Product
Price
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 251
- 9.9
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10239238, 10749, 14090S, 18749, 19691, 22570031, 4433, 4F1819372, 4F1819374, 55056783AD, 63091, 86105, 8724535205, 87634, 88406, 8942029114, 8942205921, C86105...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Isuzu I-Mark | L | 1817 | Heater To Pipe | GAS | 4 Cyl 1.8L | - |
- W/A.C.; W/A.P.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .325
- Belt Material: Epdm
- Notched: No
- Outside Circumference:
- 23.82
- 605
- Construction: Standard
- Cross Section Designation: Hc31
- Effective Length:
- 23.5
- 597
- Angle: 38
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Oldsmobile Delta 88 | V | - | Vacuum Pump | GAS | 8 Cyl 5.0L | 307 |
- W/A.P.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .325
- Belt Material: Epdm
- Notched: No
- Outside Circumference:
- 23.82
- 605
- Construction: Standard
- Cross Section Designation: Hc31
- Effective Length:
- 23.5
- 597
- Angle: 38
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
This Part Fits the Following OEM/Substitute Numbers:
08AV0595, 10-236, 10235, 10236, 10236MK, 10V0595, 11235, 11235DR, 1235, 15234, 15235, 15235DR, 1763283, 25-05982, 25-7234, 424426, 7234, 77-9823-4...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Oldsmobile 98 | V | - | Vacuum Pump | GAS | 8 Cyl 5.0L | 307 |
- W/A.C.
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Mercury Capri | L | - | Upper | GAS | 4 Cyl 2.3L | 140 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1082A64H05, 1123, 120, 1713902, 232430, 25257, 31615, 3792911, 4026082, 5023, 52023, 524, 553, 557, 596973, 645001181, 67919, 681640...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Steering System | CID |
|---|---|---|---|---|---|---|---|
| 1982 - Nissan 720 | L | 2187 | Upper | GAS | 4 Cyl 2.2L | Power | - |
- W/O A.C.
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Isuzu Pickup | L | 2238 | Lower | DIESEL | 4 Cyl 2.2L | - |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Nissan Maxima | L | 2393 | Lower | GAS | 6 Cyl 2.4L | - |
- W/A.P.
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Mazda 626 | L | 1970 | Upper | GAS | 4 Cyl 2.0L | - |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 1982 - Oldsmobile Firenza | L | - | Lower - Pipe To Radiator | GAS | 4 Cyl 1.8L | 0 | 112 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 25
- 635
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.5
- 38
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10-18381, 100955, 1038, 1225, 1320191, 140, 17026609, 23269, 25484, 31640, 3492603, 360090, 4949-36, 500006908, 52425, 541, 6025, 624...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1982 - Plymouth PB350 | V | 5211 | Upper | GAS | 8 Cyl 5.2L | 318 |
Showing 1 - 10 of 738 products
Loading...