Image
Product
Price
- Timing Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Inside Diameter: Slotted
- Pulley Quantity: 1
- Tensioner Type: Spring
- Pulley 1 Flanged: No
- Pulley Width 1 (mm): 32
- Pulley Outside Diameter 1 (mm): 60
- Material: Steel
-
Features:
- Premium bearings meet or exceed OE standards
- Metal components resist contamination with composite sealant
- Engineered with high strength, low weight & quiet operation for efficient system operation
- Gates PowerGrip Timing Tensioners are engineered with OE-quality or OE-exact fit & performance, designed & tested to increase belt life, maintain optimal tension & eliminate the need for tensioning operation during installation.
This Part Fits the Following OEM/Substitute Numbers:
024-1193, 222-195BT, 2441035010, 2441035020, 2441035060, 448-1080, 84033, 85195, 9-5195, 9195, FS64993, GT10080, MD104578, T41048, VKM75004
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Mitsubishi Galant | V | 2972 | GAS | 6 Cyl 3.0L | 181 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1082A64H05, 1123, 120, 1713902, 232430, 25257, 31615, 3792911, 4026082, 5023, 52023, 524, 553, 557, 596973, 645001181, 67919, 681640...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Mighty Max | L | 1997 | Lower | GAS | 4 Cyl 2.0L | 122 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10031, 1405630R60, 14056V5007, 16002M, 1626476040, 18031, 63101, 87001, 8971362192, D87001, F5RZ 8B081 C, F5RZ 8B081 D, F6DE 8C633 AB, F8RZ 8B081 EA, MD103789, YF1Z 8C633 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Galant | V | 2972 | Intake Manifold To Throttle Body | GAS | 6 Cyl 3.0L | 181 |
- Cut to Length, 9"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 8.25 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .5
- 13
- Material: Epdm
- End 2 Inside Diameter:
- .5
- 13
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
06A121497AA, 06A121497E, 09551D100, 100799100C, 10378155, 12608670, 12787736, 140551FJ0A, 14055EW600, 15077095, 15077147, 15181119, 15257756, 15710551, 15727309, 15763280, 15763290, 15834774...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Van | L | 2351 | Auxiliary Heater Pipe To Auxiliary Heater Pipe | GAS | 4 Cyl 2.4L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10030, 10239523, 10354454, 12553625, 14002S, 1405569A06, 1405616E10, 1405632F12, 14056V5022, 1628142020, 1628236030, 1628542010, 1629142020, 1635206, 1635221, 18030, 1J0122447BR, 24504912...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Van | L | 2351 | Engine To Throttle Body | GAS | 4 Cyl 2.4L | - |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 25.14
- 638.5
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 24.5
- 622
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
This Part Fits the Following OEM/Substitute Numbers:
11502305, 11502306, 13A0620, 13A600, 13V0620, 13V0635, 13X620, 13X640, 14-0753-6, 141-1358, 145-040620, 15617250, 16-241, 17-252, 17240, 17243, 17245, 17245AP...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Mirage | L | 1468 | Power Steering | GAS | 4 Cyl 1.5L | 90 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 35.01
- 889
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 34.44
- 875
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
04668380AA, 04668380AC, 1040345, 1172042L01, 1172042L11, 1172059S01, 1192030R10, 14-0804-6, 141-1325, 146-040875, 164353, 200435, 200558, 201803, 204463, 204654, 204897, 205223...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Mirage | L | 1468 | Water Pump and Alternator | GAS | 4 Cyl 1.5L | 90 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 17
- 432
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1016636, 1040, 1082A64H03, 1118, 114, 1303648, 1602144, 2067002, 21503L1101, 23255, 25253, 31612, 360066, 4324140, 5016, 5017, 517, 52017...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Starion | L | 2555 | Upper | GAS | 4 Cyl 2.6L | 156 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 17
- 432
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Mirage | L | 1597 | Lower | GAS | 4 Cyl 1.6L | 98 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Galant | V | 2972 | Intake Manifold To Pipe | GAS | 6 Cyl 3.0L | 181 |
Showing 1 - 10 of 51 products
Loading...