Image
Product
Price
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width:
- .531
- 13
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1411
- 55.5
- Construction: Notched
- Cross Section Designation: Hc50 Modified
- Effective Length:
- 1402
- 55.18
- Angle: 40
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
- Top Width:
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
This Part Fits the Following OEM/Substitute Numbers:
0211740023, 17551M, 25-9551M, 9551M
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Pathfinder | V | 2960 | Air Conditioning | GAS | 6 Cyl 3.0L | 181 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width:
- .579
- 15
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 36.5
- 928
- Construction: Notched
- Cross Section Designation: Hc50 Modified
- Effective Length:
- 36.14
- 918
- Angle: 40
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
- Top Width:
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
This Part Fits the Following OEM/Substitute Numbers:
0211792523, 0211792523TM, 11720V5001, 11720V5012, 119207B400, 119207B405, 119207B410, 17361M, 25-9361M, 9361M
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Pickup | L | 2389 | Air Conditioning | GAS | 4 Cyl 2.4L | - |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width:
- .579
- 15
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 36.5
- 928
- Construction: Notched
- Cross Section Designation: Hc50 Modified
- Effective Length:
- 36.14
- 918
- Angle: 40
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
- Top Width:
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Pathfinder | V | 2960 | Fan and Alternator | GAS | 6 Cyl 3.0L | 181 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 1027
- 40.44
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1013
- 39.87
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0306GM0051N, 1040398, 119201P100, 119201P110, 119505C005, 12554703, 12576745, 1752185300, 1867503300, 25-040398, 398K4, 398K4MK, 4040398, 4431887401, 4K1015, 4K398, 4K398AP, 4PK1010...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1991 - Nissan 300ZX | V | 2960 | Fan and Alternator | GAS | 6 Cyl 3.0L | Turbocharged | 181 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Stanza | L | 2389 | Throttle Body To Pipe | GAS | 4 Cyl 2.4L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10031, 1405630R60, 14056V5007, 16002M, 1626476040, 18031, 63101, 87001, 8971362192, D87001, F5RZ 8B081 C, F5RZ 8B081 D, F6DE 8C633 AB, F8RZ 8B081 EA, MD103789, YF1Z 8C633 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Axxess | L | 2389 | Pipe To Throttle Body | GAS | 4 Cyl 2.4L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.3
- 287
- End 1 Inside Diameter:
- 1.06
- 27
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.06
- 27
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
14-1880-6, 142-6043, 142-6045, 142-6133, 1657111040, 1657111071, 1657111110, 1657111210, 1785156B00, 1785160B00, 1785463B00, 1785463B10, 1785463E00, 1785563B20, 1785563B2D, 19501P08000, 20157S, 2099...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Tsuru | L | 1597 | Lower - Engine To Pipe | GAS | 4 Cyl 1.6L | 97 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1054
- 41.5
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1040
- 40.93
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1060408, 119200E010, 11920Q5600, 14-0866-8, 141-1352, 141-1378, 146-061030, 146-061035, 200546, 201160, 201743, 202802, 203615, 206542, 25-060408, 25-060408HD, 25-71036, 276415...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Sentra | L | 1998 | Alternator and Air Conditioning | GAS | 4 Cyl 2.0L | 122 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 34.625
- 879
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 34.124
- 867
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0093821010, 1040340, 11287512762, 11720V7300, 11720V7301, 11720V7310, 11720V7311, 1192065E20, 14-0670-2, 141-1303, 141-1455, 146-040865, 146-040870, 164348, 1987947827, 200765, 202038, 202555...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Stanza | L | 2389 | Air Conditioning | GAS | 4 Cyl 2.4L | - |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width:
- .531
- 13
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1158
- 45.625
- Construction: Notched
- Cross Section Designation: Hc50 Modified
- Effective Length:
- 1149
- 45.22
- Angle: 30
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
- Top Width:
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
This Part Fits the Following OEM/Substitute Numbers:
0211715023, 17452M, 25-9452M, 9452M
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Pickup | L | 2389 | Power Steering | GAS | 4 Cyl 2.4L | - |
Showing 1 - 10 of 100 products
Loading...