Shop By Product Matching "Gates"


Showing 1 - 10 of 157 products
Image
SKU
Product
Rating
Price

Gates
  • DriveAlign Premium OE Pulley
  • Product Attributes:
    • Contact Surface: Smooth/backside
    • Pulley Quantity: 1
    • Pulley 1 Groove Quantity: 0
    • Pulley 1 Outside Diameter (mm): 90
    • Pulley 1 Flanged: No
    • Bearing Bore Inside Diameter: 17
    • Pulley 1 Width (mm): 33
    • Material: Steel
  • Features:
    • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
    • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
    • OE-quality fit for virtually every domestic or import vehicle on the road today
    • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
    • Premium bearings eliminate bearing noise
    • Mounting hardware included for some popular applications
    • Reliable operation under severe conditions
  • DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.

This Part Fits the Following OEM/Substitute Numbers:
231546, 38033, 419-672, 45016, 49031, 53009508, 8014, 89546, 900045, 900045A, GT38033

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1994 - Dodge Dakota V 5211 GAS 8 Cyl 5.2L 318

Gates
  • DriveAlign Premium OE Pulley
  • Product Attributes:
    • Contact Surface: Smooth/backside
    • Pulley Quantity: 1
    • Pulley 1 Groove Quantity: 0
    • Pulley 1 Outside Diameter (mm): 90
    • Pulley 1 Flanged: No
    • Bearing Bore Inside Diameter: 17
    • Pulley 1 Width (mm): 30
    • Material: Steel
  • Features:
    • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
    • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
    • OE-quality fit for virtually every domestic or import vehicle on the road today
    • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
    • Premium bearings eliminate bearing noise
    • Mounting hardware included for some popular applications
    • Reliable operation under severe conditions
  • DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1994 - Dodge Shadow V 2972 GAS 6 Cyl 3.0L 181

Gates
  • DriveAlign Premium OE Pulley
  • Product Attributes:
    • Contact Surface: Smooth/backside
    • Pulley Quantity: 1
    • Pulley 1 Groove Quantity: 0
    • Pulley 1 Outside Diameter (mm): 90
    • Pulley 1 Flanged: No
    • Bearing Bore Inside Diameter: 17
    • Pulley 1 Width (mm): 30
    • Material: Steel
  • Features:
    • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
    • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
    • OE-quality fit for virtually every domestic or import vehicle on the road today
    • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
    • Premium bearings eliminate bearing noise
    • Mounting hardware included for some popular applications
    • Reliable operation under severe conditions
  • DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
231097, 35042, 38042, 45018, 4536074, 4536173, 4792112, 4792112AD, 4792112AE, 49038, 5281007, 53002905, 83505475, 89097, 900055, 900055A, 9031C10, SMAMP42097...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1994 - Dodge Intrepid V 3497 Alternator GAS 6 Cyl 3.5L 215

Gates
  • DriveAlign Premium OE Pulley
  • Product Attributes:
    • Contact Surface: Smooth/backside
    • Pulley Quantity: 1
    • Pulley 1 Groove Quantity: 0
    • Pulley 1 Outside Diameter (mm): 90
    • Pulley 1 Flanged: No
    • Bearing Bore Inside Diameter: 17
    • Pulley 1 Width (mm): 30
    • Material: Steel
  • Features:
    • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
    • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
    • OE-quality fit for virtually every domestic or import vehicle on the road today
    • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
    • Premium bearings eliminate bearing noise
    • Mounting hardware included for some popular applications
    • Reliable operation under severe conditions
  • DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1994 - Dodge Spirit V 2972 Serpentine GAS 6 Cyl 3.0L 181

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 25.4
      • 645
    • End 1 Inside Diameter:
      • 1.71
      • 43
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.71
      • 43
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
1024, 22083, 26254X, 52029002, 52029002AB, 62070, 71714, 8764, C2083, E71714, KM-3369

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1994 - Dodge Ram 2500 V 5211 Lower GAS 8 Cyl 5.2L 318

Gates
  • Timing Belt Tensioner
  • Product Attributes:
    • Contact Surface: Smooth/backside
    • Inside Diameter: Slotted
    • Pulley Quantity: 1
    • Tensioner Type: Spring
    • Pulley 1 Flanged: No
    • Pulley Width 1 (mm): 32
    • Pulley Outside Diameter 1 (mm): 60
    • Material: Steel
  • Features:
    • Premium bearings meet or exceed OE standards
    • Metal components resist contamination with composite sealant
    • Engineered with high strength, low weight & quiet operation for efficient system operation
  • Gates PowerGrip Timing Tensioners are engineered with OE-quality or OE-exact fit & performance, designed & tested to increase belt life, maintain optimal tension & eliminate the need for tensioning operation during installation.

This Part Fits the Following OEM/Substitute Numbers:
024-1193, 222-195BT, 2441035010, 2441035020, 2441035060, 448-1080, 84033, 85195, 9-5195, 9195, FS64993, GT10080, MD104578, T41048, VKM75004

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1994 - Dodge Spirit V 2972 GAS 6 Cyl 3.0L 181

Gates
  • W/Idler Next to Alt.; IMPORTANT: For Original Drive Design, Solution Kit Highly Recommended; W/Single Sided V-Ribbed Belt
  • DriveAlign Premium OE Pulley
  • Product Attributes:
    • Contact Surface: Smooth/backside
    • Pulley Quantity: 1
    • Pulley 1 Groove Quantity: 0
    • Pulley 1 Outside Diameter (mm): 90
    • Pulley 1 Flanged: No
    • Bearing Bore Inside Diameter: 17
    • Pulley 1 Width (mm): 30
    • Material: Steel
  • Features:
    • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
    • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
    • OE-quality fit for virtually every domestic or import vehicle on the road today
    • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
    • Premium bearings eliminate bearing noise
    • Mounting hardware included for some popular applications
    • Reliable operation under severe conditions
  • DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1994 - Dodge Caravan V 3301 Smooth Pulley GAS 6 Cyl 3.3L 201

Gates
  • Molded Heater Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Molded: Yes
    • Centerline Length:
      • 11.9
      • 302
    • End 1 Inside Diameter:
      • .75
      • 19
    • Material: Epdm
    • End 2 Inside Diameter:
      • .75
      • 19
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
    • Engineered to resist electrochemical degradation – the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

This Part Fits the Following OEM/Substitute Numbers:
11705, 16184M, 1787185Z00, 19705, 1C0121036D, 1C0121086K, 1J0121073A, 25654621, 25708701, 25740133, 64324, 88438, 92411JK60A, 96456718, 96553218, D88438

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1994 - Dodge Intrepid V 3301 Tee-2 To Reservoir GAS 6 Cyl 3.3L 201

Gates
  • DriveAlign Premium OE Pulley
  • Product Attributes:
    • Contact Surface: Smooth/backside
    • Pulley Quantity: 1
    • Pulley 1 Groove Quantity: 0
    • Pulley 1 Outside Diameter (mm): 76
    • Pulley 1 Flanged: No
    • Bearing Bore Inside Diameter: 17
    • Pulley 1 Width (mm): 29.5
    • Material: Thermoplastic
  • Features:
    • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
    • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
    • OE-quality fit for virtually every domestic or import vehicle on the road today
    • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
    • Premium bearings eliminate bearing noise
    • Mounting hardware included for some popular applications
    • Reliable operation under severe conditions
  • DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.

This Part Fits the Following OEM/Substitute Numbers:
305235, 38058, 38180, 45549, 49095, 49284, 53010240, 53032129AA, 53032645AA, 53032645AC, 68058372AA, 8012, 89235, 900126, 900126A, 999055, 999055A

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1994 - Dodge Ram 2500 V 7990 GAS 10 Cyl 8.0L 488

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 114
      • 4.5
    • End 1 Inside Diameter:
      • .94
      • 24
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • .94
      • 24
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
14240S, 22038, 25530817, 4483761, 53008654, 626-546, 63064, 64371, 71651, 72025, 8722, 97JM 8548 AG, A71651, B72025, C2038, F77Z 8548 AF, KM-3269, KM-3337...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1994 - Dodge Dakota V 5211 GAS 8 Cyl 5.2L 318
Showing 1 - 10 of 157 products

Loading...