Image
Product
Price
- Interference engine application
- Timing Belt Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Flanged End: No
- Material: Steel
-
Features:
- Engineered with OE quality or OE exact fit
- Premium bearings meet or exceed OE standards
- Hardware provided as needed
- Gates PowerGrip Idler Pulleys can be either a fixed idler or a replacement for a tensioner bracket. They can be constructed of metallic or plastic material & there are two basic surfaces – smooth & grooved (also called a sprocket).
This Part Fits the Following OEM/Substitute Numbers:
420-9010, 420-9011, 4777393, 4777394, 84086, 85357, 85487, 85504, 9-5405, GT90011, MO4777394, T41002, VKM51001, VKM51008
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1998 - Mitsubishi Eclipse | L | 1996 | GAS | 4 Cyl 2.0L | Naturally Aspirated | 122 |
- Interference engine application; Does not include cam. tensioner hyd. assy.
- Timing Belt Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Flanged End: No
- Material: Steel
-
Features:
- Engineered with OE quality or OE exact fit
- Premium bearings meet or exceed OE standards
- Hardware provided as needed
- Gates PowerGrip Idler Pulleys can be either a fixed idler or a replacement for a tensioner bracket. They can be constructed of metallic or plastic material & there are two basic surfaces – smooth & grooved (also called a sprocket).
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1998 - Mitsubishi Eclipse | L | 1996 | GAS | 4 Cyl 2.0L | Naturally Aspirated | 122 |
- Timing Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Inside Diameter: Slotted
- Pulley Quantity: 1
- Tensioner Type: Spring
- Pulley 1 Flanged: No
- Pulley Width 1 (mm): 32
- Pulley Outside Diameter 1 (mm): 60
- Material: Steel
-
Features:
- Premium bearings meet or exceed OE standards
- Metal components resist contamination with composite sealant
- Engineered with high strength, low weight & quiet operation for efficient system operation
- Gates PowerGrip Timing Tensioners are engineered with OE-quality or OE-exact fit & performance, designed & tested to increase belt life, maintain optimal tension & eliminate the need for tensioning operation during installation.
This Part Fits the Following OEM/Substitute Numbers:
024-1193, 222-195BT, 2441035010, 2441035020, 2441035060, 448-1080, 84033, 85195, 9-5195, 9195, FS64993, GT10080, MD104578, T41048, VKM75004
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Mitsubishi 3000GT | V | 2972 | SOHC | GAS | 6 Cyl 3.0L | 181 |
- Interference engine application; Does not include cam. tensioner hyd. assy.
- PowerGrip Premium OE Timing Belt Component Kit
- Product Attributes:
- Idler Quantity: 1
- Belt Quantity: 1
- Grade Type: Oe Exact
- Engine Water Pump Quantity: 0
- Belt Top Color: Black
- Installation Instructions Included: Yes
- Belt Material: Hsn
- Instruction Sheet Number: 0098-1634
- Timing Belt 1 Width (in): 1.26
- Tensioner Type: Hydraulic
- Tooth Type: Modified Curvilinear (iii)
- Timing Belt 1 Teeth Quantity: 187
- Timing Marks: No
- Timing Belt 1 Width (mm): 32
- Tensioner Quantity: 1
- Number of Components: 3
-
Features:
- Total solution for any application: TCK includes belts, idler(s), tensioners, tensioner springs, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications
- Popular kits covering domestic and import (European and Asian) vehicle applications
- Designed for convenience, easy parts sourcing and reduced customer comebacks
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Gates is the world's leading manufacturer of timing belts and Timing Component Kits. We designed our kits for virtually every vehicle make and model so technicians can conduct complete system replacements and streamline parts sourcing. As the Original Equipment Manufacturer (OEM) for vehicle manufacturers globally, our Timing Component Kits are OE-equivalent or better in service life, quality, and performance.
This Part Fits the Following OEM/Substitute Numbers:
2420-0259, 2522590, 84050, 94050, 95259K2, 95259K2S, BK259, BTK95613, GTK0259, PP259LK1, TB259K1, TCK259, VKMA95613
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Mitsubishi Montero Sport | V | 2972 | GAS | 6 Cyl 3.0L | 181 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1082A64H05, 1123, 120, 1713902, 232430, 25257, 31615, 3792911, 4026082, 5023, 52023, 524, 553, 557, 596973, 645001181, 67919, 681640...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Mitsubishi 3000GT | V | 2972 | Upper | GAS | 6 Cyl 3.0L | 181 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 12.7
- 323
- End 1 Inside Diameter:
- 1.34
- 34
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
04881100AC, 20369S, 22626, 4881100AC, 4881100AF, 4881100AG, 62325, 72045, 9259, D72045, MR239633
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Mitsubishi Montero Sport | L | 2351 | Upper | GAS | 4 Cyl 2.4L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 39.375
- 999
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 38.78
- 985
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
04892711AA, 04892747AA, 1040388, 1195097E00, 1195097E10, 12578549, 1752181AA0, 1867503370, 21140-Z5701, 2114025701, 25-040388, 25-040388HD, 388K4, 388K4MK, 4040388, 4451A058, 4792408AA, 4892711AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Mitsubishi Montero Sport | L | 2351 | Fan and Alternator | GAS | 4 Cyl 2.4L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10030, 10239523, 10354454, 12553625, 14002S, 1405569A06, 1405616E10, 1405632F12, 14056V5022, 1628142020, 1628236030, 1628542010, 1629142020, 1635206, 1635221, 18030, 1J0122447BR, 24504912...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Mitsubishi Eclipse | L | 1997 | Turbocharger To Engine | GAS | 4 Cyl 2.0L | 122 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .667
- 17
- Outside Circumference:
- 1148
- 45.187
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1133
- 44.62
- Rib Quantity: 5
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
07L903137E, 10223911, 1050445, 1172000QAN, 11720BN700, 25-050446, 2521239800, 30681318, 4050445, 4451A104, 445K5, 445K5MK, 446K5, 5050445, 5050445DR, 5K1135, 5K1140, 5K445...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Mitsubishi Montero Sport | V | 2972 | Fan and Alternator | GAS | 6 Cyl 3.0L | 181 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 1067
- 42
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1054
- 41.503
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1040413, 11720F6501, 14-0807-0, 141-1326, 146-041050, 164420, 200561, 203647, 25-040413, 25-71050, 404-0413, 4040412, 412K4, 413K4, 4298114, 4413, 4K0413, 4K412...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Mitsubishi Montero Sport | L | 2351 | Fan and Power Steering | GAS | 4 Cyl 2.4L | - |
Showing 1 - 10 of 56 products
Loading...