Image
Product
Price
- Protective sleeve required
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.8
- 376
- End 1 Inside Diameter:
- 1.34
- 34
- Material: Epdm, Plastic
- Modular: No
- End 2 Inside Diameter:
- 1.34
- 34
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
215012Y000, 2150131U00, 2150131U10, 22183, 22312M, 254114D900, 62479, 71794, 8843, C71794, KM-3421, MR312255, MR355521
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2001 - Infiniti I30 | V | 2988 | Upper | GAS | 6 Cyl 3.0L | 182 |
- Cut to Length, 4 1/2"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2001 - Infiniti QX4 | V | 3498 | Pipe-5 To Pipe-1 | GAS | 6 Cyl 3.5L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1195
- 47
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1181
- 46.48
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
028260849A, 028260849F, 032145933, 032145933T, 038903137AA, 038903137L, 06H903137J, 06M903137T, 1004484, 1060465, 11281470027, 11281747277, 11287636368, 11288581628, 11920AL510, 12578000, 14-0715-8, 1539603...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2001 - Infiniti QX4 | V | 3498 | Alternator and Power Steering | GAS | 6 Cyl 3.5L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 34
- 864
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 33.46
- 850
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
04668241, 04668241AC, 058260849, 1040335, 1172042L03, 1172042L041, 11720B4800, 119201E400, 1192053120, 11920V7301, 11920V7302, 11920V7311, 1195053J10, 1195053J12, 1195053J20, 1195053J20TT, 1195053J20U5, 1195053J20UU...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2001 - Infiniti G20 | L | 2000 | Power Steering and Water Pump | GAS | 4 Cyl 2.0L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 31.213
- 793
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 30.65
- 779
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1040305, 11282243732, 1162031000, 1172026E02, 1172026E12, 1195031U00, 1195031U00TT, 1195031U01, 1195031U02, 11950331U01, 119508J100, 1340A066, 14-0666-4, 141-1361, 141-1454, 146-040775, 146-040780, 164313...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2001 - Infiniti I30 | V | 2988 | Power Steering | GAS | 6 Cyl 3.0L | 182 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 37.96
- 964
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 37.38
- 949
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
005435171, 1040372, 1040375, 1192004U00, 1192006P01, 1192060U00, 1192060U01, 11920AG900, 1195004U00, 1195059S02, 11950AR000, 11950AR00A, 128026, 128028, 14-0805-4, 141-1354, 141-1492, 146-040940...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2001 - Infiniti QX4 | V | 3498 | Air Conditioning | GAS | 6 Cyl 3.5L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1122
- 44.125
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1108
- 43.62
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009931700, 0217638, 1060435, 117204Z80A, 117204Z80B, 117205M000, 11720EL05A, 11720JD20A, 11720VC800, 119202Y501, 1238934H1, 14-0517-0, 141-1491, 146-061105, 1558205, 200325, 200346, 200362...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2001 - Infiniti I30 | V | 2988 | Alternator and Air Conditioning | GAS | 6 Cyl 3.0L | 182 |
- Line Assembly - HP
- Production: -06/30/2001
- w/o Pressure Switch
Additional Fitment Information:
| Vehicle | Position | Prod. Date Range |
|---|---|---|
| 2001 - Infiniti I30 | To Rack | To:06-30-01 |
- Molded
- Production: -08/31/2000
Additional Fitment Information:
| Vehicle | Position | Prod. Date Range |
|---|---|---|
| 2001 - Infiniti QX4 | Heater Outlet (Rear) To Pipe | To:08-31-00 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .75
- 19
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10017940, 10065640, 10065675, 10120065, 10135307, 10145119, 10188037, 10218423, 10227419, 10385281, 10441374, 1405531U00, 1405646R00, 1405670F05, 14244S, 15077061, 15123654, 15258060...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2001 - Infiniti I30 | V | 2988 | Pipe-1 To Pipe-3 | GAS | 6 Cyl 3.0L | 182 |
Showing 1 - 10 of 27 products
Loading...