Shop By Product Matching "Gates"
Choose a Model for your 2004 Ford
Crown Victoria
E-150
E-150 Club Wagon
E-250
E-350 Club Wagon
E-350 Super Duty
EcoSport
Econoline
Escape
Excursion
Expedition
Explorer
Explorer Sport Trac
F-150
F-150 Heritage
F-250
F-250 Super Duty
F-350
F-350 Super Duty
F-650
F-750
Fiesta
Focus
Freestar
Grand Marquis
Ka
Lobo
Mondeo
Mustang
Ranger
Taurus
Thunderbird
Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 23.7
- 602
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22859, 26471X, 4L3Z 8286 BC, 62904, 72419, 9494, E72419, KM4738
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford F-150 | V | - | Lower | GAS | 8 Cyl 5.4L | Naturally Aspirated | 330 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 236
- 9.3
- End 1 Inside Diameter:
- 1.51
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.51
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
1F1Z 8286 AB, 1F1Z 8B273 AB, 20399S, 22811, 66140, 72168, 9446, C72168, KM-4547
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford Taurus | V | 2968 | Lower | DOHC | GAS | 6 Cyl 3.0L | 181 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 22.8
- 579
- End 1 Inside Diameter:
- 1.47
- 37
- Material: Epdm, Plastic
- Modular: No
- End 2 Inside Diameter:
- 1.47
- 37
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22242, 24346L, 62138, 71840, 8882, C2242, E71840, F6DE 8B274 DB, F6DZ 8260 A, KM-3026
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford Taurus | V | 2986 | Upper | OHV | GAS | 6 Cyl 3.0L | 182 |
- W/1-Idler Pulley; Interference engine application
- PowerGrip Premium OE Timing Belt Component Kit
- Product Attributes:
- Idler Quantity: 1
- Belt Quantity: 1
- Engine Water Pump Quantity: 0
- Belt Top Color: Black
- Installation Instructions Included: Yes
- Belt Material: Hsn
- Instruction Sheet Number: 0098-1398, 0098-1471, 0098-1699
- Timing Belt 1 Width (in): 1
- Tensioner Type: Spring
- Tooth Type: Modified Curvilinear (iii)
- Timing Belt 1 Teeth Quantity: 129
- Timing Marks: No
- Timing Belt 1 Width (mm): 25
- Tensioner Quantity: 1
- Number of Components: 3
-
Features:
- Total solution for any application: TCK includes belts, idler(s), tensioners, tensioner springs, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications
- Popular kits covering domestic and import (European and Asian) vehicle applications
- Designed for convenience, easy parts sourcing and reduced customer comebacks
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Gates is the world's leading manufacturer of timing belts and Timing Component Kits. We designed our kits for virtually every vehicle make and model so technicians can conduct complete system replacements and streamline parts sourcing. As the Original Equipment Manufacturer (OEM) for vehicle manufacturers globally, our Timing Component Kits are OE-equivalent or better in service life, quality, and performance.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford Focus | L | 1989 | DOHC | GAS | 4 Cyl 2.0L | ZTW | 121 |
- PowerGrip Premium OE Timing Belt Component Kit
- Product Attributes:
- Idler Quantity: 1
- Belt Quantity: 1
- Engine Water Pump Quantity: 0
- Belt Top Color: Black
- Installation Instructions Included: Yes
- Belt Material: Hsn
- Instruction Sheet Number: 0098-1398, 0098-1471, 0098-1699
- Timing Belt 1 Width (in): 1
- Tensioner Type: Spring
- Tooth Type: Modified Curvilinear (iii)
- Timing Belt 1 Teeth Quantity: 129
- Timing Marks: No
- Timing Belt 1 Width (mm): 25
- Tensioner Quantity: 1
- Number of Components: 3
-
Features:
- Total solution for any application: TCK includes belts, idler(s), tensioners, tensioner springs, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications
- Popular kits covering domestic and import (European and Asian) vehicle applications
- Designed for convenience, easy parts sourcing and reduced customer comebacks
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Gates is the world's leading manufacturer of timing belts and Timing Component Kits. We designed our kits for virtually every vehicle make and model so technicians can conduct complete system replacements and streamline parts sourcing. As the Original Equipment Manufacturer (OEM) for vehicle manufacturers globally, our Timing Component Kits are OE-equivalent or better in service life, quality, and performance.
This Part Fits the Following OEM/Substitute Numbers:
2425-2294, 2522942, 95294K3, 95294K3S, GTK0294B, TB294K3, TCK294B
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Ford Escape | L | 1989 | GAS | 4 Cyl 2.0L | 121 |
- W/A.C.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2093
- 82.5
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2082
- 81.96
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0089972192, 0089973792, 12578553, 25-060819, 4060820, 6K2080, 6K819, 6K819AP, 6PK2080, 6PK2083, 819K6, 92252907, K060819
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Escape | V | 2968 | Accessory Drive | GAS | 6 Cyl 3.0L | 181 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Modular Components Included: Outlet
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 26.35
- 669
- End 1 Inside Diameter:
- .72
- 18
- Material: Epdm, Plastic
- Modular: Yes
- End 2 Inside Diameter:
- .95
- 24
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
17367, 24761L, 72080, F11187, YF1Z 8075 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford Taurus | V | 2986 | Reservoir To Lower Hose | OHV | GAS | 6 Cyl 3.0L | 182 |
- Interference engine application
- PowerGrip Premium OE Timing Belt Component Kit
- Product Attributes:
- Idler Quantity: 0
- Belt Quantity: 1
- Engine Water Pump Quantity: 0
- Belt Top Color: Black
- Installation Instructions Included: Yes
- Belt Material: Hsn
- Instruction Sheet Number: 0098-0165
- Timing Belt 1 Width (in): 1
- Tensioner Type: Spring
- Tooth Type: Modified Curvilinear (iii)
- Timing Belt 1 Teeth Quantity: 99
- Timing Marks: No
- Timing Belt 1 Width (mm): 25
- Tensioner Quantity: 1
- Number of Components: 2
-
Features:
- Total solution for any application: TCK includes belts, idler(s), tensioners, tensioner springs, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications
- Popular kits covering domestic and import (European and Asian) vehicle applications
- Designed for convenience, easy parts sourcing and reduced customer comebacks
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Gates is the world's leading manufacturer of timing belts and Timing Component Kits. We designed our kits for virtually every vehicle make and model so technicians can conduct complete system replacements and streamline parts sourcing. As the Original Equipment Manufacturer (OEM) for vehicle manufacturers globally, our Timing Component Kits are OE-equivalent or better in service life, quality, and performance.
This Part Fits the Following OEM/Substitute Numbers:
2425-0283, 2522830, 95283K1, 95283K1S, BK283, GTK0283, TB283K1, TB283K2, TCK283, TTIK085
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Focus | L | 1989 | SOHC | GAS | 4 Cyl 2.0L | 121 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 30.3
- 770
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22863, 26474X, 4L34 8B274 DC, 4L3Z 8260 DA, 62903, 66009, 72248, 7L3Z 8260 A, 9498, E72248, KM 4917, KM-4739
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford F-250 | V | - | Upper | GAS | 8 Cyl 4.6L | 281 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 19.21
- 488
- End 1 Inside Diameter:
- 1.45
- 37
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.45
- 37
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
1L24 8B274 BC, 1L2Z 8260 BA, 22691, 24481L, 62343, 72517, 9324, E72517, KM-4545
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford Explorer | V | - | Upper | GAS | 6 Cyl 4.0L | Limited | 245 |
Showing 1 - 10 of 322 products
Loading...