Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 30
- 762
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.53
- 39
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
15160997, 22651, 26398X, 62423, 72193, 9284, E72193
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Oldsmobile Bravada | L | - | Lower | GAS | 6 Cyl 4.2L | 256 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.1
- 257
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
15160996, 20382S, 22652, 62422, 71078, 9285, F10103
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Oldsmobile Bravada | L | - | Upper | GAS | 6 Cyl 4.2L | 256 |
- W/150A. Alt.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2337
- 92
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2320
- 91.34
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
12569531, 12575216, 12593774, 25-060913, 4060913, 4060915, 6K913, K060913
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Oldsmobile Bravada | L | - | GAS | 6 Cyl 4.2L | 256 |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Grade Type: Oe Exact
- Pulley 1 Outside Diameter (mm): 76
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 30.5
- Material: Steel
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12563097, 36347, 419-681, 50017, 8049, 900554, 900554A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Oldsmobile Silhouette | V | - | GAS | 6 Cyl 3.4L | 207 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Performance
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 70
- Width 1 (mm): 30
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): 1.18
- Material: Steel
- Outside Diameter 1 (in): 2.76
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
12573024, 24576885, 305269, 38178, 419-125, 45547, 49280, 89269, 89269FN, 999551, 999551A, SMAMP40269
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Oldsmobile Bravada | L | - | GAS | 6 Cyl 4.2L | 256 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 19.1
- 485
- End 1 Inside Diameter:
- 1.27
- 32
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.27
- 32
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
10238922, 10306075, 10306705, 10352409, 10422115, 22361, 26351X, 62326, 71949, 88894136, 88894251, 88895497, 88897267, 89023429, 8994, D71949
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Oldsmobile Silhouette | V | - | Upper | GAS | 6 Cyl 3.4L | 207 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Exact
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 82
- Width 1 (mm): 27
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): 1.06
- Material: Steel
- Outside Diameter 1 (in): 3.23
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
24430296, 305316, 38177, 419-015, 49281, 89316, 89316FN, 90537585, 999581, 999581A, SMAMP40316, VKM34027
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Oldsmobile Alero | L | 2198 | GAS | 4 Cyl 2.2L | 134 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 19.1
- 485
- End 1 Inside Diameter:
- 1.31
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.31
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22332, 22594000, 22627304, 22680462, 22680642, 26343X, 62215, 71947, 8965, C2332, E71947
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Oldsmobile Alero | V | - | Upper | GAS | 6 Cyl 3.4L | 207 |
- W/Aux. Heater
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 180
- 7.1
- End 1 Inside Diameter:
- .58
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .58
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10453, 1405516E05, 14314S, 15138450, 15832905, 18453, 1L2Z 18472 BD, 1L2Z 18472 NA, 1L2Z 18472 PA, 22646764, 807615182, 89023416, 89025001, F10037, KH-72, KH-73, KH101
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Oldsmobile Bravada | L | - | Tee To Engine | GAS | 6 Cyl 4.2L | 256 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: V-ribbed Grooved
- Grade Type: Oe Performance
- Pulley 1 Flanged: Yes
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 6
- Outside Diameter 1 (mm): 76
- Width 1 (mm): 25
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): .98
- Material: Thermoplastic
- Outside Diameter 1 (in): 2.99
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
12563083, 24503851, 24507667, 24507684, 305241, 35104, 38104, 419-104, 45896, 49245, 89241, 999011, 999011A, 999553, 999553A, GM1414613, SMAMP40241
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Oldsmobile Silhouette | V | - | GAS | 6 Cyl 3.4L | 207 |
Showing 1 - 10 of 63 products
Loading...