Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 19.9
- 505
- End 1 Inside Diameter:
- 1.32
- 34
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.32
- 34
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
165720D120, 1657222070, 22465M, 22758, 62439, 72170, 88969100, 9391, D72170
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Toyota Matrix | L | 1794 | Lower | 1ZZ-FE | GAS | 4 Cyl 1.8L | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 20.9
- 531
- End 1 Inside Diameter:
- 1.2
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.33
- 34
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
165710D120, 165710D150, 1657122160, 1657122170, 22757, 24490L, 62438, 72169, 88969099, 88973500, 9390, E72169
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Toyota Matrix | L | 1794 | Upper | GAS | 4 Cyl 1.8L | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.6
- 371
- End 1 Inside Diameter:
- 1.29
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.29
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
165710H020, 1657128080, 20859516, 20922122, 22486M, 22827, 254111E000, 254111G000, 25799025, 25952790, 62418, 66265, 66585, 9462, F10114
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Toyota Solara | L | 2362 | Upper | GAS | 4 Cyl 2.4L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .42
- 11
- Outside Circumference:
- 34.375
- 874
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 33.86
- 860
- Rib Quantity: 3
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1195042L00, 1195042L10, 1195067S00, 25-030338, 3K338, 3K860, 3PK860, 4030339, 9091602570, K030338, PK030338, QJK3343
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Toyota Prius | L | 1497 | Accessory Drive | FULL HYBRID EV-GAS (FHEV) | 4 Cyl 1.5L | 91 |
- Timing Belt Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Flanged End: No
- Material: Steel
-
Features:
- Engineered with OE quality or OE exact fit
- Premium bearings meet or exceed OE standards
- Hardware provided as needed
- Gates PowerGrip Idler Pulleys can be either a fixed idler or a replacement for a tensioner bracket. They can be constructed of metallic or plastic material & there are two basic surfaces – smooth & grooved (also called a sprocket).
This Part Fits the Following OEM/Substitute Numbers:
024-1176, 135030A010, 1350362010, 1350362030, 470-8540, 7303, 85303, 85492, 9-5303, FU70999, GT80540, T42030, VKM81000
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Toyota Camry | V | 3300 | GAS | 6 Cyl 3.3L | - |
- Interference engine application
- Timing Belt Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Flanged End: No
- Material: Steel
-
Features:
- Engineered with OE quality or OE exact fit
- Premium bearings meet or exceed OE standards
- Hardware provided as needed
- Gates PowerGrip Idler Pulleys can be either a fixed idler or a replacement for a tensioner bracket. They can be constructed of metallic or plastic material & there are two basic surfaces – smooth & grooved (also called a sprocket).
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Toyota Highlander | V | 3300 | GAS | 6 Cyl 3.3L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 19.2
- 488
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Toyota Solara | V | 3300 | Upper | GAS | 6 Cyl 3.3L | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 19.2
- 488
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
165710A020, 165710A040, 1657120020, 1657120030, 1657120060, 1657120080, 1657120081, 16571AA010, 22309, 24367L, 62420, 62520, 71797, 72150, 8942, E71797, E72150
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Toyota Avalon | V | 2995 | Upper | GAS | 6 Cyl 3.0L | - |
- PowerGrip Premium OE Timing Belt
- Product Attributes:
- Top Width:
- 1.26
- 32
- Belt Material: Hsn
- Grade Type: Oe Exact
- Color: Black
- Timing Marks: Yes
- Pitch: .315
- Cog Quantity: 211
- Pitch Length:
- 1688
- 66.457
- Profile Type: Curvilinear (ii)
- Type: Automotive Timing Belt
- Cord Material: Fiberglass
- Top Width:
-
Features:
- PTFE-infused jackets to reduce frictional losses and tooth shear
- High-grade HNBR rubber for superior heat and contamination resistance
- Premium tensile members providing maximum strength
- Aramid-reinforced nylon jackets and backsides increase durability and lifetime
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Simply put, no one does Timing Belts with better design, or bigger market reach, than Gates. As a leading global manufacturer of OE timing belts, we've set the standard on creating aftermarket timing belts that meet or exceed OE standards of fit, function and performance. Resistant to heat, wear and contamination, Gates automotive timing belts have extensive coverage for millions of import (European and Asian) and domestic vehicles.
This Part Fits the Following OEM/Substitute Numbers:
026-1018, 1356809050, 1356809080, 135680A010, 135680A011, 1356820010, 1356820020, 1356829015, 1356829025, 250257, 40257, 95257, 95257FN, A664Y32MM, B257, CD-257, CET257, HX664Y32...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Toyota Camry | V | 3300 | GAS | 6 Cyl 3.3L | - |
- Interference engine application
- PowerGrip Premium OE Timing Belt
- Product Attributes:
- Top Width:
- 1.26
- 32
- Belt Material: Hsn
- Grade Type: Oe Exact
- Color: Black
- Timing Marks: Yes
- Pitch: .315
- Cog Quantity: 211
- Pitch Length:
- 1688
- 66.457
- Profile Type: Curvilinear (ii)
- Type: Automotive Timing Belt
- Cord Material: Fiberglass
- Top Width:
-
Features:
- PTFE-infused jackets to reduce frictional losses and tooth shear
- High-grade HNBR rubber for superior heat and contamination resistance
- Premium tensile members providing maximum strength
- Aramid-reinforced nylon jackets and backsides increase durability and lifetime
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Simply put, no one does Timing Belts with better design, or bigger market reach, than Gates. As a leading global manufacturer of OE timing belts, we've set the standard on creating aftermarket timing belts that meet or exceed OE standards of fit, function and performance. Resistant to heat, wear and contamination, Gates automotive timing belts have extensive coverage for millions of import (European and Asian) and domestic vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Toyota Highlander | V | 3300 | GAS | 6 Cyl 3.3L | - |
Showing 1 - 10 of 163 products
Loading...