Shop By Product Matching "Gates"

Choose a Model for your 2005 Acura


Showing 1 - 10 of 48 products
Image
SKU
Product
Rating
Price

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 17.1
      • 434
    • End 1 Inside Diameter:
      • 1.04
      • 26
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.04
      • 26
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
19502PLD000, 22830, 24501L, 62389, 62836, 72096, 9465, E72096

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2005 - Acura EL L 1668 Lower GAS 4 Cyl 1.7L -

Gates
  • Spool Valve Gasket & Filter
  • Engine Variable Timing Spool Valve Filter
  • Product Attributes:
    • Filter Material: Rubber, Stainless Steel
    • Gasket Thickness:
      • .095
      • .137
  • Features:
    • Provides a cost-savings alternative to replacing the complete spool valve
    • Direct replacement ensures exact fit, easy installation and leak-free seal
    • Micron screen filters are constructed with polished stainless steel to prevent corrosion
    • Designed to filter out harmful particles as small as 0.0059 in. (0.149 mm) to prevent spool valve failure
  • Gates OE performance Variable Valve Timing Spool Valve Filters and Gaskets provide a cost-savings alternative to replacing the complete spool valve and, if serviced, can extend the life of the spool valve. These gaskets are constructed from high quality materials for durability and maximum service life. They effectively restore engine performance for better fuel economy, enhanced power and reduced emissions.

This Part Fits the Following OEM/Substitute Numbers:
12582257, 15825P8AA01, 917-171, F10301, SVF1002, VVS902

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
2005 - Acura TL V 3210 GAS 6 Cyl 3.2L -

Gates
  • Interference engine application
  • PowerGrip Premium OE Timing Belt
  • Product Attributes:
    • Top Width:
      • .787
      • 20
    • Belt Material: Hsn
    • Grade Type: Oe Exact
    • Color: Black
    • Timing Marks: No
    • Pitch: .315
    • Cog Quantity: 197
    • Pitch Length:
      • 1576
      • 62.047
    • Profile Type: Modified Curvilinear (iii)
    • Type: Automotive Timing Belt
    • Cord Material: Fiberglass
  • Features:
    • PTFE-infused jackets to reduce frictional losses and tooth shear
    • High-grade HNBR rubber for superior heat and contamination resistance
    • Premium tensile members providing maximum strength
    • Aramid-reinforced nylon jackets and backsides increase durability and lifetime
    • Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
  • Simply put, no one does Timing Belts with better design, or bigger market reach, than Gates. As a leading global manufacturer of OE timing belts, we've set the standard on creating aftermarket timing belts that meet or exceed OE standards of fit, function and performance. Resistant to heat, wear and contamination, Gates automotive timing belts have extensive coverage for millions of import (European and Asian) and domestic vehicles.

This Part Fits the Following OEM/Substitute Numbers:
12581899, 14400R9PA01, 14400RCAA01, 250329, 40329, 95329, 95329FN, B329, CD329, HS620YU20, OHC329, T329, TB329

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
2005 - Acura TL V 3210 GAS 6 Cyl 3.2L -

Gates
  • Includes Idler Pulley
  • DriveAlign Premium OE Automatic Belt Tensioner
  • Product Attributes:
    • Contact Surface: Smooth/backside, Smooth/backside
    • Pulley 2 Flanged: No
    • Grade Type: Oe Exact
    • Pulley 1 Flanged: No
    • Mounting Hole Quantity: 2
    • Pulley 2 Groove Quantity: 0
    • Outside Diameter 2 (in): 2.99
    • Pulley Quantity: 2
    • Pulley 1 Groove Quantity: 0
    • Outside Diameter 1 (mm): 76
    • Outside Diameter 2 (mm): 76
    • Width 2 (in): 1.2
    • Width 1 (mm): 29.5
    • Bearing Bore Inside Diameter:
      • .67
      • 17
    • Width 2 (mm): 30.5
    • Width 1 (in): 1.16
    • Material: Steel, Steel
    • Outside Diameter 1 (in): 3
    • Belt Type: V-ribbed
  • Features:
    • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
    • Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
    • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
    • Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
    • Torsional round spring design provides reliability as well as consistent tension
  • Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.

This Part Fits the Following OEM/Substitute Numbers:
04317RCA305, 305369, 31170RCAA01, 31170RCAA02, 31170RCAA03, 31170RCAA04, 38332, 49349, 89369, 89369FN, 999671, 999671A

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
2005 - Acura TL V 3210 GAS 6 Cyl 3.2L -

Gates
  • Engine Variable Valve Timing Solenoid
  • Product Attributes:
    • : Steel
    • Overall Height:
      • 1.031
      • 26.2
    • Connector Gender: Female
    • Mounting Hardware Included: No
    • Housing Width:
      • 1.031
      • 26.2
    • Connector Quantity: 2
    • Terminal Quantity: 2
    • Seal Included: Yes
    • Housing Length:
      • 1.102
      • 28
    • Activation Type: Electromagnetic
    • Terminal Type: Pin
    • Terminal Gender: Male
  • Features:
    • Continuously controls oil flow for precise timing and maximum engine performance
    • Direct replacement ensures exact fit and easy installation
    • Superior construction with exceptional components
  • Gates OE performance Variable Valve Timing Solenoids, commonly referred to as Oil Control Valves, are designed to OE specifications in fit, form and performance. Each component is constructed from high quality materials for durability and maximum service life and tested to effectively restore engine performance for better fuel economy, enhanced power, improved idle and reduced emissions.

This Part Fits the Following OEM/Substitute Numbers:
15810RAAA03, 2T1147, 7V-5008, 917-224, R53013, TS1147, VTS1189, VV1044, VVS214, VVT144

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine Sub Model CID
2005 - Acura RSX L 1998 Spool Valve GAS 4 Cyl 2.0L Base 122

Gates
  • DriveAlign Premium OE Pulley
  • Product Attributes:
    • Contact Surface: Smooth/backside
    • Pulley Quantity: 1
    • Pulley 1 Groove Quantity: 0
    • Pulley 1 Outside Diameter (mm): 76
    • Pulley 1 Flanged: No
    • Bearing Bore Inside Diameter: 17
    • Pulley 1 Width (mm): 32
    • Material: Steel
  • Features:
    • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
    • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
    • OE-quality fit for virtually every domestic or import vehicle on the road today
    • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
    • Premium bearings eliminate bearing noise
    • Mounting hardware included for some popular applications
    • Reliable operation under severe conditions
  • DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.

This Part Fits the Following OEM/Substitute Numbers:
04317RCA305, 305369, 31170RCAA01, 31170RCAA02, 31170RCAA03, 31170RCAA04, 31190RCAA01, 31190RCAA02, 36112, 38332, 49096, 49349, 89369, 89369FN, 900114, 900114A, 999671, 999671A...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
2005 - Acura RL V 3471 GAS 6 Cyl 3.5L -

Gates
  • Premium OE Micro-V Belt
  • Product Attributes:
    • Top Width:
      • .807
      • 20
    • Outside Circumference:
      • 2149
      • 84.625
    • Grade Type: Oe Performance
    • Cross Section Designation: K
    • Effective Length:
      • 2135
      • 84.06
    • Rib Quantity: 6
    • Type: Automotive V-ribbed Belt (standard)
    • Cord Material: Polyester
    • Material: Epdm
  • Features:
    • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
    • EPDM rubber constructions resist cracking on the rib surface
    • Meets or exceeds all specifications from the Original Equipment Manufacturer
    • Tensioner Replacement is Recommended (if equipped)
  • Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

This Part Fits the Following OEM/Substitute Numbers:
0029930996, 25-060841, 38920RCAA03, 5060840, 56992R70A01, 56992RKB004, 56992RN0A01, 56992RV0A01, 56992RV0A02, 56992RV0A03, 6K2135, 6K841, 6PK2135, 6PK2136, K060841, QJK6845, SMAMV6PK2135

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
2005 - Acura RL V 3471 GAS 6 Cyl 3.5L -

Gates
  • Premium OE Micro-V Belt
  • Product Attributes:
    • Top Width:
      • .667
      • 17
    • Outside Circumference:
      • 1111
      • 43.75
    • Grade Type: Oe Performance
    • Cross Section Designation: K
    • Effective Length:
      • 1098
      • 43.24
    • Rib Quantity: 5
    • Type: Automotive V-ribbed Belt (standard)
    • Cord Material: Polyester
    • Material: Epdm
  • Features:
    • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
    • EPDM rubber constructions resist cracking on the rib surface
    • Meets or exceeds all specifications from the Original Equipment Manufacturer
    • Tensioner Replacement is Recommended (if equipped)
  • Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

This Part Fits the Following OEM/Substitute Numbers:
1050433, 25-050433, 31110PR7A04, 4050433, 433K5, 433K5MK, 5050433, 5050433DR, 5K1100, 5K433, 5K433AP, 5PK1100, 5PVK1100, 9008091122, K050433, K4335, PK050433, QJK5436...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2005 - Acura NSX V 3179 Alternator GAS 6 Cyl 3.2L -

Gates
  • Premium OE Micro-V Belt
  • Product Attributes:
    • Top Width:
      • .947
      • 24
    • Outside Circumference:
      • 1716
      • 67.5
    • Grade Type: Oe Performance
    • Cross Section Designation: K
    • Effective Length:
      • 1701
      • 66.98
    • Rib Quantity: 7
    • Type: Automotive V-ribbed Belt (standard)
    • Cord Material: Polyester
    • Material: Epdm
  • Features:
    • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
    • EPDM rubber constructions resist cracking on the rib surface
    • Meets or exceeds all specifications from the Original Equipment Manufacturer
    • Tensioner Replacement is Recommended (if equipped)
  • Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

This Part Fits the Following OEM/Substitute Numbers:
1070670, 11720JA10B, 25-070669, 38920PRC014, 4070670, 5070670, 5070670DR, 670K7, 670K7MK, 7K669, 7K669AP, 7PK1699, 7PK1700, 7PK1701, 7PK1705, 7PVK1702, K070669, PK070670...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine Sub Model CID
2005 - Acura RSX L 1998 GAS 4 Cyl 2.0L Type-S 122

Gates
  • Premium OE Micro-V Belt
  • Product Attributes:
    • Top Width:
      • .807
      • 20
    • Outside Circumference:
      • 1000
      • 39.36
    • Grade Type: Oe Performance
    • Cross Section Designation: K
    • Effective Length:
      • 38.78
      • 985
    • Rib Quantity: 6
    • Type: Automotive V-ribbed Belt (standard)
    • Cord Material: Polyester
    • Material: Epdm
  • Features:
    • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
    • EPDM rubber constructions resist cracking on the rib surface
    • Meets or exceeds all specifications from the Original Equipment Manufacturer
    • Tensioner Replacement is Recommended (if equipped)
  • Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

This Part Fits the Following OEM/Substitute Numbers:
1060388, 11287603348, 25-060388, 388K6, 38920PLR003, 38920PLR004, 390K6, 5060388, 5060388DR, 6K388, 6K388AP, 6K986, 6PK0985, 6PK0986, 6PK985, 6PK986, 6PVK0985, K060388...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2005 - Acura EL L 1668 Alternator and Air Conditioning GAS 4 Cyl 1.7L -
Showing 1 - 10 of 48 products

Loading...