Shop By Product Matching "Gates"
Choose a Make for your 2006 vehicle
Image
Product
Price
- VIN 202465 & After; Interference engine application
- Timing Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Inside Diameter: 30
- Pulley Quantity: 1
- Grade Type: Oe Exact
- Tensioner Type: Spring
- Pulley 1 Flanged: No
- Pulley Width 1 (mm): 26.5
- Pulley Outside Diameter 1 (mm): 60
- Material: Plastic
-
Features:
- Premium bearings meet or exceed OE standards
- Metal components resist contamination with composite sealant
- Engineered with high strength, low weight & quiet operation for efficient system operation
- Gates PowerGrip Timing Tensioners are engineered with OE-quality or OE-exact fit & performance, designed & tested to increase belt life, maintain optimal tension & eliminate the need for tensioning operation during installation.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Volvo V50 | L | 2521 | GAS | 5 Cyl 2.5L | - |
- Interference engine application
- Timing Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Inside Diameter: 30
- Pulley Quantity: 1
- Grade Type: Oe Exact
- Tensioner Type: Spring
- Pulley 1 Flanged: No
- Pulley Width 1 (mm): 26.5
- Pulley Outside Diameter 1 (mm): 60
- Material: Plastic
-
Features:
- Premium bearings meet or exceed OE standards
- Metal components resist contamination with composite sealant
- Engineered with high strength, low weight & quiet operation for efficient system operation
- Gates PowerGrip Timing Tensioners are engineered with OE-quality or OE-exact fit & performance, designed & tested to increase belt life, maintain optimal tension & eliminate the need for tensioning operation during installation.
This Part Fits the Following OEM/Substitute Numbers:
30677832, 490-3813, T43172
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Volvo C70 | L | 2521 | GAS | 5 Cyl 2.5L | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 30
- 762
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.53
- 39
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
15160997, 22651, 26398X, 62423, 72193, 9284, E72193
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - GMC Envoy | L | - | Lower | GAS | 6 Cyl 4.2L | 256 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.1
- 257
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
15160996, 20382S, 22652, 62422, 71078, 9285, F10103
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - Isuzu Ascender | L | - | Upper | GAS | 6 Cyl 4.2L | 256 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 12.04
- 306
- End 1 Inside Diameter:
- 1.78
- 45
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.78
- 45
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
20391S, 22718, 52079712AB, 62366, 72196, 9351, C72196
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - Jeep Liberty | V | - | Lower | GAS | 6 Cyl 3.7L | 226 |
- W/150A. Alt.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2337
- 92
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2320
- 91.34
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Buick Rainier | L | - | GAS | 6 Cyl 4.2L | 256 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2337
- 92
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2320
- 91.34
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
12569531, 12575216, 12593774, 25-060913, 4060913, 4060915, 6K913, K060913
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2006 - GMC Envoy | L | - | GAS | 6 Cyl 4.2L | 256 |
- W/A.C.
- Accessory Belt Drive Kit (Heavy Duty)
- Product Attributes:
- Idler Pulley 1 Part Number: 36315
- Belt 1 Part Number: K081264hd
- Outside Circumference:
- 127
- 3227
- Tensioner Assembly Part Number: 38285
- Belt Top Width:
- 1.087
- 28
-
Features:
- Kit includes application-specific FleetRunner heavy duty serpentine belt(s), FleetRunner tensioner, idler pulleys as required and hardware (where applicable) needed to perform a complete serpentine belt drive refresh
- FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
- Complete system service extends preventive maintenance schedules
- Engineered to save your fleet money and reduce downtime
- Gates FleetRunner Heavy Duty Serpentine Kits make it easy to perform proper serpentine system service. One part number gets you everything you need in one package so you can keep your fleet on the road. Some kits offer improvements over OE designs, solving problems that have been discovered through thousands of miles of heavy duty maintenance histories.
This Part Fits the Following OEM/Substitute Numbers:
90K-38285, ACK081264HD, DBK081264HD
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Dodge Ram 2500 | L | - | DIESEL | 6 Cyl 5.9L | 359 |
- W/Single Alt.
- Accessory Belt Drive Kit (Heavy Duty)
- Product Attributes:
- Idler Pulley 1 Part Number: 36310
- Belt 1 Part Number: K061195hd
- Outside Circumference:
- 120.1
- 3051
- Idler Pulley 2 Part Number: 36310
- Tensioner Assembly Part Number: 38172
- Belt Top Width:
- .807
- 20
-
Features:
- Kit includes application-specific FleetRunner heavy duty serpentine belt(s), FleetRunner tensioner, idler pulleys as required and hardware (where applicable) needed to perform a complete serpentine belt drive refresh
- FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
- Complete system service extends preventive maintenance schedules
- Engineered to save your fleet money and reduce downtime
- Gates FleetRunner Heavy Duty Serpentine Kits make it easy to perform proper serpentine system service. One part number gets you everything you need in one package so you can keep your fleet on the road. Some kits offer improvements over OE designs, solving problems that have been discovered through thousands of miles of heavy duty maintenance histories.
This Part Fits the Following OEM/Substitute Numbers:
90K-38172, ACK061195HD, DBK061195HD
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2006 - GMC Sierra 3500 | V | 6599 | DIESEL | 8 Cyl 6.6L | 403 |
- W/A.C.; OE Exact Aramid Cord Belt
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2340
- 92.13
- Grade Type: Oe Exact
- Cross Section Designation: K
- Effective Length:
- 2326
- 91.57
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Aramid
- Material: Epdm
- Top Width:
-
Features:
- Essential for specifically-identified demanding accessory belt drives
- Exact OEM aramid cord construction replacement
- Extends belt life and other accessory drive components on applications requiring replacement of an aramid cord belt
- Reduces noise, vibration and harshness
- Gates, the leader in automotive serpentine belt drive systems, collaborates with OE manufacturers globally to continually evolve the performance and durability of belt drives. Certain vehicle engine applications require specific belt constructions, such as aramid tensile cord, to provide long belt life and eliminate noise and vibration that are inherent on these drives. Utilizing this same technology for the Aftermarket, Gates offers an aramid cord belt for these specified vehicles. This construction matches the OEM to assure a quiet and smooth functioning belt, with the same performance and durability as the OEM part.
This Part Fits the Following OEM/Substitute Numbers:
12580826, 12593776, 12611636, 25-060916A, 4060915F, 6K916A, A060915, K060916A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2006 - GMC Canyon | L | 2770 | GAS | 4 Cyl 2.8L | 169 |
Showing 1 - 10 of 1728 products
Loading...