Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.7
- 373
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
10363796, 10363797, 22576M, 22699878, 22707606, 22709846, 22709850, 23166, 62652, 9827, F10144
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Saturn Ion | L | 2384 | Upper | GAS | 4 Cyl 2.4L | 145 |
- Spool Valve Gasket & Filter
- Engine Variable Timing Spool Valve Filter
- Product Attributes:
- Filter Material: Rubber, Stainless Steel
- Gasket Thickness:
- .095
- .137
-
Features:
- Provides a cost-savings alternative to replacing the complete spool valve
- Direct replacement ensures exact fit, easy installation and leak-free seal
- Micron screen filters are constructed with polished stainless steel to prevent corrosion
- Designed to filter out harmful particles as small as 0.0059 in. (0.149 mm) to prevent spool valve failure
- Gates OE performance Variable Valve Timing Spool Valve Filters and Gaskets provide a cost-savings alternative to replacing the complete spool valve and, if serviced, can extend the life of the spool valve. These gaskets are constructed from high quality materials for durability and maximum service life. They effectively restore engine performance for better fuel economy, enhanced power and reduced emissions.
This Part Fits the Following OEM/Substitute Numbers:
12582257, 15825P8AA01, 917-171, F10301, SVF1002, VVS902
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Saturn Vue | V | 3471 | GAS | 6 Cyl 3.5L | - |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Exact
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 82
- Width 1 (mm): 27
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): 1.06
- Material: Steel
- Outside Diameter 1 (in): 3.23
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
24430296, 305316, 38177, 419-015, 49281, 89316, 89316FN, 90537585, 999581, 999581A, SMAMP40316, VKM34027
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Saturn Vue | L | 2198 | GAS | 4 Cyl 2.2L | 134 |
- Interference engine application
- PowerGrip Premium OE Timing Belt
- Product Attributes:
- Top Width:
- .787
- 20
- Belt Material: Hsn
- Grade Type: Oe Exact
- Color: Black
- Timing Marks: No
- Pitch: .315
- Cog Quantity: 197
- Pitch Length:
- 1576
- 62.047
- Profile Type: Modified Curvilinear (iii)
- Type: Automotive Timing Belt
- Cord Material: Fiberglass
- Top Width:
-
Features:
- PTFE-infused jackets to reduce frictional losses and tooth shear
- High-grade HNBR rubber for superior heat and contamination resistance
- Premium tensile members providing maximum strength
- Aramid-reinforced nylon jackets and backsides increase durability and lifetime
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Simply put, no one does Timing Belts with better design, or bigger market reach, than Gates. As a leading global manufacturer of OE timing belts, we've set the standard on creating aftermarket timing belts that meet or exceed OE standards of fit, function and performance. Resistant to heat, wear and contamination, Gates automotive timing belts have extensive coverage for millions of import (European and Asian) and domestic vehicles.
This Part Fits the Following OEM/Substitute Numbers:
12581899, 14400R9PA01, 14400RCAA01, 250329, 40329, 95329, 95329FN, B329, CD329, HS620YU20, OHC329, T329, TB329
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Saturn Vue | V | 3471 | GAS | 6 Cyl 3.5L | - |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Exact
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 82
- Width 1 (mm): 27
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): 1.06
- Material: Steel
- Outside Diameter 1 (in): 3.23
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Saturn Sky | L | 2384 | Alternator and Air Conditioning | GAS | 4 Cyl 2.4L | 145 |
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Accessory Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: No
- Impeller Rotation: Standard
- Includes Back Housing: Yes
- Pulley Included: Yes
- Impeller Material: Plastic
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
12591894, 12621284, 12624936, 12630084, 130-7350AH, 131-2394, 131-2459, 24439798, 24461382, 24467301, 251-732, 43529, 90537805, 93178602, 93181118, 93195308, 943529, AW5092...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Saturn Vue | L | 2198 | GAS | 4 Cyl 2.2L | 134 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 35.78
- 909
- End 1 Inside Diameter:
- .23
- 6
- Material: Epdm
- End 2 Inside Diameter: .3
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10126, 15020224, 15041308, 15190788, 15274729, 15788670, 18126, 18206L, 22717008, 22733960, 22742965, 22827734, 25803110, 25976471, 64113, 64413, 86836, E86836...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2007 - Saturn Ion | L | 2384 | Manual | Pipe-1 To Reservoir | GAS | 4 Cyl 2.4L | 145 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 109.75
- 2788
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 109.21
- 2774
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
10042724, 1061093, 1090K6, 1093K6, 1093K6MK, 1095K6, 12577770, 12577771, 12654273, 25-061093, 4061093, 5061090, 5061090DR, 5061093, 5061093DR, 6K1093, 6K1093AP, 6K2770...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Saturn Aura | V | 3490 | GAS | 6 Cyl 3.5L | 213 |
- Interference engine application
- PowerGrip Premium OE Timing Belt Component Kit W/Water Pump
- Product Attributes:
- Springs Included: No
- Bolt Quantity: 0
- Belt Quantity: 1
- Grade Type: Oe Exact
- Spring Quantity: 0
- Timing Belt Width 1 (mm): 20
- Belt Top Color: Black
- Bolt Included: No
- Installation Instructions Included: Yes
- Installation Tool Included: No
- Instruction Sheet Number: 0098-1647
- Tensioner Included: Yes
- Timing Belt 1 Teeth Quantity: 197
- Timing Belt Included: Yes
- Timing Marks: No
- Seal Quantity: 1
- Number of Components: 5
- Gasket Quantity: 0
- Gasket Or Seals Included: Yes
- Idler Pulley Included: Yes
- Idler Quantity: 1
- Engine Water Pump Quantity: 1
- Timing Belt Width 1 (in): .787
- Belt Material: Hsn, Fiberglass Cord
- Tensioner Type: Hydraulic
- Tooth Type: Modified Curvilinear (iii)
- Tensioner Quantity: 2
-
Features:
- Total solution for any application: Includes belts, idler(s), tensioners, tensioner springs, water pump, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications
- Water pumps are designed and built for long lasting, efficient cooling
- Hydraulic tensioners included, where needed
- Everything you need to do the job right, all in one box
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Gates Timing Belt Component Kits with Water Pump offer customers the best and most complete repair solution by including the same premium components as our TCK’s - timing belts, pulleys and tensioners - as well as a water pump. Timing belt driven water pumps should always be replaced at the same time as the timing belt. Don't take chances. With Gates TCKWP’s, you can avoid returns by replacing all critical system components at the same time.
This Part Fits the Following OEM/Substitute Numbers:
20358K, AWK1230, BWPK41184, CK329LK1, GTKWP329, PP329LK2, TB329LK1, TB329LK2, TBK329WP, TCKWP329, TKH002, USTK329, WP329K1A, WP329K1AS, WP329K2A, WP329K2AS, WPK-0013, WPK41184...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Saturn Vue | V | 3471 | GAS | 6 Cyl 3.5L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 180
- 7.1
- End 1 Inside Diameter:
- .58
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .58
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10453, 1405516E05, 14314S, 15138450, 15832905, 18453, 1L2Z 18472 BD, 1L2Z 18472 NA, 1L2Z 18472 PA, 22646764, 807615182, 89023416, 89025001, F10037, KH-72, KH-73, KH101
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Saturn Relay | V | 3880 | Heater To Tee-1 | GAS | 6 Cyl 3.9L | 237 |
Showing 1 - 10 of 98 products
Loading...