Image
Product
Price
- Available Until Stock Depleted
- Premium OE Dual Sided Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1232
- 48.5
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1200
- 47.25
- Rib Quantity: 6
- Type: Automotive Dual-sided V-ribbed Belt
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Micro-V belt ribs on both sides of the belt
- Specially designed to resist wear and cracking due to overall reduced thickness in construction
- Custom setup for specialized Gates Solution Kits for serpentine drives that cause problems from the OEM
- Broad, application-specific coverage
- Tensioner Replacement is Recommend (if equipped)
- Gates Dual-Sided Micro-V belt replace original equipment belts on serpentine drives that require a higher degree of efficiency when transmitting power. These belts are designed for small diameter pulleys, used with or without automatic tensioners.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2007 - Volkswagen Jetta City | L | 1984 | GAS | 4 Cyl 2.0L | Naturally Aspirated | 121 |
- W/A.C.; Available Until Stock Depleted
- Premium OE Dual Sided Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1232
- 48.5
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1200
- 47.25
- Rib Quantity: 6
- Type: Automotive Dual-sided V-ribbed Belt
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Micro-V belt ribs on both sides of the belt
- Specially designed to resist wear and cracking due to overall reduced thickness in construction
- Custom setup for specialized Gates Solution Kits for serpentine drives that cause problems from the OEM
- Broad, application-specific coverage
- Tensioner Replacement is Recommend (if equipped)
- Gates Dual-Sided Micro-V belt replace original equipment belts on serpentine drives that require a higher degree of efficiency when transmitting power. These belts are designed for small diameter pulleys, used with or without automatic tensioners.
This Part Fits the Following OEM/Substitute Numbers:
06A260849, 06A260849B, 06A260849C, 06A260849E, 1111928, 2060472, 25-D060472, 470DK6MK, 470KK6, 472DK6MK, 6060470, 6060470DR, 6DK472, 6DPK1195, 6DPK1199, 6DPK1200, 6PKK1195, 6PVKK1195...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Volkswagen Golf | L | 1984 | GAS | 4 Cyl 2.0L | 121 |
- W/Plastic Impeller; Interference engine application; Timing Belt Driven
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Timing Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Installation Warnings: Coolant Flush Required. Fill W/ New Volkswagen Coolant Or Oe Equivalent Only.
- Timing Belt Driven: Yes
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Plastic
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
06A121011F, 06A121011G, 06A121011H, 06A121011HX, 06A121011L, 06A121011LX, 06A121011T, 06A121011TX, 06A121012, 06A121012D, 06A121012E, 06A121012G, 06A121012X, 06A121018B, 06A121031C, 1-9270, 131-2227, 133024...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Volkswagen Golf | L | 1984 | GAS | 4 Cyl 2.0L | 121 |
- Timing Belt Driven
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Timing Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Installation Warnings: Coolant Flush Required. Fill W/ New Volkswagen Coolant Or Oe Equivalent Only.
- Timing Belt Driven: Yes
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Plastic
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Volkswagen Polo | L | 1984 | GAS | 4 Cyl 2.0L | 121 |
- W/Plastic Impeller; Interference engine application; Timing Belt Driven
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Timing Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Installation Warnings: Coolant Flush Required. Fill W/ New Volkswagen Coolant Or Oe Equivalent Only.
- Timing Belt Driven: Yes
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Plastic
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2007 - Volkswagen Jetta City | L | 1984 | Main | GAS | 4 Cyl 2.0L | Naturally Aspirated | 121 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Volkswagen Passat | V | 3597 | Lower | GAS | 6 Cyl 3.6L | 219 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
0002030702, 0588220, 0982656, 09913360, 101681, 101684, 1022789, 1101681, 112, 14-2186-4, 1405560U10, 142-0207, 1565137, 1592, 1657316020, 18-70704, 1B16597H01, 1J0122101CC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Volkswagen Passat | V | 3597 | Upper - Radiator To Tee | GAS | 6 Cyl 3.6L | 219 |
- W/A.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 30.34
- 771
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 29.5
- 749
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0069972492, 0117500, 037145271F, 0403295, 0403296, 07827, 0855721100, 0950750, 1000783, 10295, 104007, 105E 8620, 105E8620, 1084877, 1085949, 10A0750, 10AV0750, 10V0750...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Volkswagen Derby | L | 1781 | Power Steering | GAS | 4 Cyl 1.8L | - |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 70
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 26
- Material: Thermoplastic
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
This Part Fits the Following OEM/Substitute Numbers:
04854089A, 06A903315D, 06A903315E, 06A903315F, 11281439062, 11287503427, 11287515866, 11287515867, 166200V010, 1662036030, 19189978, 1F2015980, 1L5Q 6A228 AB, 1L5Z 6B209 A, 1L5Z 6B209 AA, 231033, 231144, 23770AA05A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2007 - Volkswagen Bora | L | 1984 | GAS | 4 Cyl 2.0L | Turbocharged | 121 |
- Available Until Stock Depleted
- Pressure Line Assembly
This Part Fits the Following OEM/Substitute Numbers:
1C0422893AS, 1C0422893BC, 36-366158, 366158, 37793, 5-75148, 7-7358, 75148, 92720
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Volkswagen Beetle | L | 2480 | Automatic | GAS | 5 Cyl 2.5L | 151 |
Showing 1 - 10 of 19 products
Loading...