Image
Product
Price
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 13.5
- 343
- End 1 Inside Diameter:
- .6
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .66
- 17
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
13577, 254702G600
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Kia Sportage | L | 1998 | Oil Cooler | GAS | 4 Cyl 2.0L | 122 |
- May 30, 2010 & Older
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 102.25
- 2596
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 101.66
- 2582
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Kia Rondo | L | 2359 | GAS | 4 Cyl 2.4L | - |
- W/A.C.; W/O Electronic P.S.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 102.25
- 2596
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 101.66
- 2582
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0119976792, 076260849C, 1017K6MK, 25-061016, 2521225000, 4061017, 6K1016, 6PK2581, 6PK2585, K061016, QJK61022
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Kia Forte | L | 2359 | GAS | 4 Cyl 2.4L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.6
- 371
- End 1 Inside Diameter:
- 1.29
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.29
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
165710H020, 1657128080, 20859516, 20922122, 22486M, 22827, 254111E000, 254111G000, 25799025, 25952790, 62418, 66265, 66585, 9462, F10114
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Kia Rio5 | L | 1599 | Upper | GAS | 4 Cyl 1.6L | - |
- Interference engine application
- PowerGrip Premium OE Timing Belt
- Product Attributes:
- Top Width:
- 1
- 25
- Belt Material: Hsn
- Grade Type: Oe Exact
- Color: Black
- Timing Marks: No
- Pitch:
- .375
- 9.5
- Cog Quantity: 113
- Pitch Length:
- 1076
- 42.375
- Profile Type: Modified Curvilinear (iii)
- Type: Automotive Timing Belt
- Cord Material: Fiberglass
- Top Width:
-
Features:
- PTFE-infused jackets to reduce frictional losses and tooth shear
- High-grade HNBR rubber for superior heat and contamination resistance
- Premium tensile members providing maximum strength
- Aramid-reinforced nylon jackets and backsides increase durability and lifetime
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Simply put, no one does Timing Belts with better design, or bigger market reach, than Gates. As a leading global manufacturer of OE timing belts, we've set the standard on creating aftermarket timing belts that meet or exceed OE standards of fit, function and performance. Resistant to heat, wear and contamination, Gates automotive timing belts have extensive coverage for millions of import (European and Asian) and domestic vehicles.
This Part Fits the Following OEM/Substitute Numbers:
026-1023, 2431223201, 2431223202, 2431223400, 250284, 40284, 94676, 95284, 95284FN, A424RU100, B284, CD-284, CET284, OHC284, T284, TB-284, TB284, TX284...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Kia Soul | L | 1975 | GAS | 4 Cyl 2.0L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 34.125
- 867
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 33.57
- 853
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
25-040336, 336K4, 4K336, 4K336AP, 4PK852, 4PK853, 4PK855, 977132D100, 977132D510, 977132E000, 97713OK26615908, 997132E000, BP4W15907B, K040336, PK040336, QJK4341
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Kia Soul | L | 1975 | Air Conditioning | GAS | 4 Cyl 2.0L | - |
- Interference engine application
- PowerGrip Premium OE Timing Belt Component Kit W/Water Pump
- Product Attributes:
- Springs Included: No
- Bolt Quantity: 0
- Belt Quantity: 1
- Grade Type: Oe Exact
- Spring Quantity: 0
- Timing Belt Width 1 (mm): 25
- Belt Top Color: Black
- Bolt Included: No
- Installation Instructions Included: Yes
- Installation Tool Included: No
- Instruction Sheet Number: 0098-1705
- Tensioner Included: Yes
- Timing Belt 1 Teeth Quantity: 113
- Timing Belt Included: Yes
- Timing Marks: No
- Seal Quantity: 0
- Number of Components: 4
- Gasket Quantity: 1
- Gasket Or Seals Included: Yes
- Idler Pulley Included: Yes
- Idler Quantity: 1
- Engine Water Pump Quantity: 1
- Timing Belt Width 1 (in): 1
- Belt Material: Hsn, Fiberglass Cord
- Tensioner Type: Eccentric
- Tooth Type: Modified Curvilinear (iii)
- Tensioner Quantity: 1
-
Features:
- Total solution for any application: Includes belts, idler(s), tensioners, tensioner springs, water pump, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications
- Water pumps are designed and built for long lasting, efficient cooling
- Hydraulic tensioners included, where needed
- Everything you need to do the job right, all in one box
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Gates Timing Belt Component Kits with Water Pump offer customers the best and most complete repair solution by including the same premium components as our TCK’s - timing belts, pulleys and tensioners - as well as a water pump. Timing belt driven water pumps should always be replaced at the same time as the timing belt. Don't take chances. With Gates TCKWP’s, you can avoid returns by replacing all critical system components at the same time.
This Part Fits the Following OEM/Substitute Numbers:
24486K, 3446-1284, BWPK41061A, GTKWP284A, PP284LK2, TB284LK2, TCKWP284A, TKK-003, VKMA95667SWP, WP284K2A, WP284K2AS, WPK41061A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Kia Soul | L | 1975 | GAS | 4 Cyl 2.0L | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.8
- 376
- End 1 Inside Diameter:
- 1.34
- 34
- Material: Epdm, Plastic
- Modular: No
- End 2 Inside Diameter:
- 1.34
- 34
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
215012Y000, 2150131U00, 2150131U10, 22183, 22312M, 254114D900, 62479, 71794, 8843, C71794, KM-3421, MR312255, MR355521
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Kia Sedona | V | 3470 | Upper | GAS | 6 Cyl 3.5L | - |
- Interference engine application
- PowerGrip Premium OE Timing Belt Component Kit
- Product Attributes:
- Idler Quantity: 1
- Belt Quantity: 1
- Engine Water Pump Quantity: 0
- Belt Top Color: Black
- Installation Instructions Included: Yes
- Belt Material: Hsn
- Instruction Sheet Number: 0098-1461
- Timing Belt 1 Width (in): .866
- Tensioner Type: Spring
- Tooth Type: Modified Curvilinear (iii)
- Timing Belt 1 Teeth Quantity: 105
- Timing Marks: No
- Tensioner Quantity: 1
- Number of Components: 3
-
Features:
- Total solution for any application: TCK includes belts, idler(s), tensioners, tensioner springs, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications
- Popular kits covering domestic and import (European and Asian) vehicle applications
- Designed for convenience, easy parts sourcing and reduced customer comebacks
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Gates is the world's leading manufacturer of timing belts and Timing Component Kits. We designed our kits for virtually every vehicle make and model so technicians can conduct complete system replacements and streamline parts sourcing. As the Original Equipment Manufacturer (OEM) for vehicle manufacturers globally, our Timing Component Kits are OE-equivalent or better in service life, quality, and performance.
This Part Fits the Following OEM/Substitute Numbers:
2446-0282, 2522820, 84073, 94073, 95282K1, 95282K1S, BK282, GTK0282, TB282K1, TCK282, TTIK073, VKMA95632
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Kia Rio5 | L | 1599 | GAS | 4 Cyl 1.6L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 32.5
- 826
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 31.89
- 810
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
119500M200, 11950F4200, 25-040319, 320K4MK, 38920P73003, 4040319, 4K319, 4K810, 4PK0810, 4PK810, 4PK812, 4PK813, 977131C200, 977132D000, 9936480810, K040319, QJK4324
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Kia Rio5 | L | 1599 | Air Conditioning | GAS | 4 Cyl 1.6L | - |
Showing 1 - 10 of 60 products
Loading...