Shop By Product Matching "Gates"
Image
Product
Price
- W/145A. Alt.
- Accessory Belt Drive Kit (Heavy Duty)
- Product Attributes:
- Idler Pulley 1 Part Number: 36299
- Belt 1 Part Number: K060930hd
- Outside Circumference:
- 2377
- 916
- 93.585
- Belt 2 Part Number: K040355sf
- Tensioner Assembly Part Number: 39083
- Belt Top Width:
- .56
- .807
- 14
- 20
-
Features:
- Kit includes application-specific FleetRunner heavy duty serpentine belt(s), FleetRunner tensioner, idler pulleys as required and hardware (where applicable) needed to perform a complete serpentine belt drive refresh
- FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
- Complete system service extends preventive maintenance schedules
- Engineered to save your fleet money and reduce downtime
- Gates FleetRunner Heavy Duty Serpentine Kits make it easy to perform proper serpentine system service. One part number gets you everything you need in one package so you can keep your fleet on the road. Some kits offer improvements over OE designs, solving problems that have been discovered through thousands of miles of heavy duty maintenance histories.
This Part Fits the Following OEM/Substitute Numbers:
90K-39083B
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Chevrolet Express 3500 | V | 5967 | FLEX | 8 Cyl 6.0L | 364 |
- Interference engine application
- Timing Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Inside Diameter: 30
- Pulley Quantity: 1
- Grade Type: Oe Exact
- Tensioner Type: Spring
- Pulley 1 Flanged: No
- Pulley Width 1 (mm): 26.5
- Pulley Outside Diameter 1 (mm): 60
- Material: Plastic
-
Features:
- Premium bearings meet or exceed OE standards
- Metal components resist contamination with composite sealant
- Engineered with high strength, low weight & quiet operation for efficient system operation
- Gates PowerGrip Timing Tensioners are engineered with OE-quality or OE-exact fit & performance, designed & tested to increase belt life, maintain optimal tension & eliminate the need for tensioning operation during installation.
This Part Fits the Following OEM/Substitute Numbers:
30677832, 490-3813, T43172
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Volvo C70 | L | 2521 | GAS | 5 Cyl 2.5L | - |
- VIN 202465 & After; Interference engine application
- Timing Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Inside Diameter: 30
- Pulley Quantity: 1
- Grade Type: Oe Exact
- Tensioner Type: Spring
- Pulley 1 Flanged: No
- Pulley Width 1 (mm): 26.5
- Pulley Outside Diameter 1 (mm): 60
- Material: Plastic
-
Features:
- Premium bearings meet or exceed OE standards
- Metal components resist contamination with composite sealant
- Engineered with high strength, low weight & quiet operation for efficient system operation
- Gates PowerGrip Timing Tensioners are engineered with OE-quality or OE-exact fit & performance, designed & tested to increase belt life, maintain optimal tension & eliminate the need for tensioning operation during installation.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Volvo S40 | L | 2521 | GAS | 5 Cyl 2.5L | 154 |
- W/A.C.
- Accessory Belt Drive Kit (Heavy Duty)
- Product Attributes:
- Idler Pulley 1 Part Number: 36315
- Belt 1 Part Number: K081264hd
- Outside Circumference:
- 127
- 3227
- Tensioner Assembly Part Number: 38285
- Belt Top Width:
- 1.087
- 28
-
Features:
- Kit includes application-specific FleetRunner heavy duty serpentine belt(s), FleetRunner tensioner, idler pulleys as required and hardware (where applicable) needed to perform a complete serpentine belt drive refresh
- FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
- Complete system service extends preventive maintenance schedules
- Engineered to save your fleet money and reduce downtime
- Gates FleetRunner Heavy Duty Serpentine Kits make it easy to perform proper serpentine system service. One part number gets you everything you need in one package so you can keep your fleet on the road. Some kits offer improvements over OE designs, solving problems that have been discovered through thousands of miles of heavy duty maintenance histories.
This Part Fits the Following OEM/Substitute Numbers:
90K-38285, ACK081264HD, DBK081264HD
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | DIESEL | 6 Cyl 6.7L | 408 |
- Spool Valve Gasket & Filter
- Engine Variable Timing Spool Valve Filter
- Product Attributes:
- Filter Material: Rubber, Stainless Steel
- Gasket Thickness: .12
-
Features:
- Provides a cost-savings alternative to replacing the complete spool valve
- Direct replacement ensures exact fit, easy installation and leak-free seal
- Micron screen filters are constructed with polished stainless steel to prevent corrosion
- Designed to filter out harmful particles as small as 0.0059 in. (0.149 mm) to prevent spool valve failure
- Gates OE performance Variable Valve Timing Spool Valve Filters and Gaskets provide a cost-savings alternative to replacing the complete spool valve and, if serviced, can extend the life of the spool valve. These gaskets are constructed from high quality materials for durability and maximum service life. They effectively restore engine performance for better fuel economy, enhanced power and reduced emissions.
This Part Fits the Following OEM/Substitute Numbers:
15815R40A01, VVS907
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Honda Civic | L | 2354 | GAS | 4 Cyl 2.4L | 144 |
- Spool Valve Gasket & Filter; W/O PZEV Emissions
- Engine Variable Timing Spool Valve Filter
- Product Attributes:
- Filter Material: Rubber, Stainless Steel
- Gasket Thickness: .12
-
Features:
- Provides a cost-savings alternative to replacing the complete spool valve
- Direct replacement ensures exact fit, easy installation and leak-free seal
- Micron screen filters are constructed with polished stainless steel to prevent corrosion
- Designed to filter out harmful particles as small as 0.0059 in. (0.149 mm) to prevent spool valve failure
- Gates OE performance Variable Valve Timing Spool Valve Filters and Gaskets provide a cost-savings alternative to replacing the complete spool valve and, if serviced, can extend the life of the spool valve. These gaskets are constructed from high quality materials for durability and maximum service life. They effectively restore engine performance for better fuel economy, enhanced power and reduced emissions.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Honda Accord | L | 2356 | GAS | 4 Cyl 2.4L | 144 |
- Spool Valve Gasket & Filter; W/PZEV Emissions
- Engine Variable Timing Spool Valve Filter
- Product Attributes:
- Filter Material: Rubber, Stainless Steel
- Gasket Thickness: .111
-
Features:
- Provides a cost-savings alternative to replacing the complete spool valve
- Direct replacement ensures exact fit, easy installation and leak-free seal
- Micron screen filters are constructed with polished stainless steel to prevent corrosion
- Designed to filter out harmful particles as small as 0.0059 in. (0.149 mm) to prevent spool valve failure
- Gates OE performance Variable Valve Timing Spool Valve Filters and Gaskets provide a cost-savings alternative to replacing the complete spool valve and, if serviced, can extend the life of the spool valve. These gaskets are constructed from high quality materials for durability and maximum service life. They effectively restore engine performance for better fuel economy, enhanced power and reduced emissions.
This Part Fits the Following OEM/Substitute Numbers:
15815R41L01, VVS906
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Honda Accord | L | 2356 | GAS | 4 Cyl 2.4L | 144 |
- OE Exact Aramid Cord Belt
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2340
- 92.13
- Grade Type: Oe Exact
- Cross Section Designation: K
- Effective Length:
- 2326
- 91.57
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Aramid
- Material: Epdm
- Top Width:
-
Features:
- Essential for specifically-identified demanding accessory belt drives
- Exact OEM aramid cord construction replacement
- Extends belt life and other accessory drive components on applications requiring replacement of an aramid cord belt
- Reduces noise, vibration and harshness
- Gates, the leader in automotive serpentine belt drive systems, collaborates with OE manufacturers globally to continually evolve the performance and durability of belt drives. Certain vehicle engine applications require specific belt constructions, such as aramid tensile cord, to provide long belt life and eliminate noise and vibration that are inherent on these drives. Utilizing this same technology for the Aftermarket, Gates offers an aramid cord belt for these specified vehicles. This construction matches the OEM to assure a quiet and smooth functioning belt, with the same performance and durability as the OEM part.
This Part Fits the Following OEM/Substitute Numbers:
12580826, 12593776, 12611636, 25-060916A, 4060915F, 6K916A, A060915, K060916A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - GMC Canyon | L | 3654 | GAS | 5 Cyl 3.7L | 223 |
- BEDRUG 08-16 FORD SUPERDUTY 6.5' SHORT BED WITH FACTORY STEP GATE
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step With Tailgate Step
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: Multi Piece
- Mounting: Under Bed Rail & Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Instruction Manual Included: Yes
- Category: Bedrug Bedliner
- Paintable: No
- Tailgate Cover Included: Yes
- Drilling Required: No
- Extras: Includes Tailgate Mat
-
Features:
- If installing a BedRug over a spray-in bedliner, supplemental installation kit #BRZSPRAYON is required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Region | Bed Length |
|---|---|---|
| 2012 - Ford F-350 Super Duty | United States | 81.8 |
- BEDRUG 09-14 FORD F-150 6.5' BED WITH FACTORY STEP GATE
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate With Tailgate Step
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: Multi Piece
- Mounting: Under Bed Rail & Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Instruction Manual Included: Yes
- Category: Bedrug Bedliner
- Paintable: No
- Tailgate Cover Included: Yes
- Drilling Required: No
- Extras: Includes Tailgate Mat
-
Features:
- If installing a BedRug over a spray-in bedliner, supplemental installation kit #BRZSPRAYON is required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Region | Bed Length |
|---|---|---|
| 2012 - Ford F-150 | United States | 78.8 |
Showing 1 - 10 of 1140 products
Loading...