Shop By Product Matching "Gates"
Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 21
- 533
- End 1 Inside Diameter:
- 1.1
- 28
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.1
- 28
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
84129275
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2020 - Chevrolet Equinox | L | 1998 | Upper | GAS | 4 Cyl 2.0L | 122 |
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Timing Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: Yes
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Plastic
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
06K121011B, 06K121011C, 42196, 942196, US8124
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Volkswagen Jetta | L | 1984 | GAS | 4 Cyl 2.0L | 121 |
- Automotive V-Ribbed Belt (E-Start)
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1614
- 63.53
- Grade Type: Oe Exact
- Cross Section Designation: K
- Effective Length:
- 1597
- 62.87
- Rib Quantity: 6
- Type: Automotive V-ribbed Belts (e-start)
- Cord Material: Aramid
- Material: Epdm
- Top Width:
-
Features:
- Provides high performance, delivering more than 600,000 starts
- Reduced noise output, vibration and harshness (NVH)
- Service life in excess of 150,000 miles
- Advanced construction utilizing specially formulated aramid tensile cords and adhesion layer for maximum performance in belt-driven starter generator stop-start drives
- High load and flex capacity
- Tensioner Replacement is Recommend (if equipped)
- Gates E-Start Micro-V Belts serve as a core component belt-driven starter generator stop-start belt drives, promoting increased fuel efficiency, smaller and virtually silent operation.
This Part Fits the Following OEM/Substitute Numbers:
25-060628EST, L1MZ 8620 C, L1MZ 8620 H
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Ford Explorer | V | 3343 | FULL HYBRID EV-GAS (FHEV) | 6 Cyl 3.3L | 204 |
- Premium OE Stretch Fit Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1040
- 40.96
- Instruction Manual Included: Sheet M
- Grade Type: Oe Exact
- Cross Section Designation: K
- Effective Length:
- 1022
- 40.23
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (stretch Fit)
- Cord Material: Nylon
- Material: Epdm
- Installation Tools Requirements: Special Installation Tool
- Top Width:
-
Features:
- Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
- Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
- Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
- NOTE: Stretch Fit belts are single-use only and must be replaced if removed
- Gates Micro-V Stretch Fit Belts, with exclusive self-tensioning technology, fit like a glove and perform properly on unique stretch fit drive systems. Gates continues to add coverage to this growing market segment.
This Part Fits the Following OEM/Substitute Numbers:
25-060402SF, 402K6S, 4060438S, GS7Z 8620 A, JK6 424 A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Ford Fusion | L | 1499 | GAS | 4 Cyl 1.5L | 91 |
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Accessory Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: No
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Plastic
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
192006A0A01, 41222, 941222
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Honda Accord | L | 1497 | GAS | 4 Cyl 1.5L | - |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 90
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 31
- Material: Steel
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
This Part Fits the Following OEM/Substitute Numbers:
12555609, 12580771, 12669569, 36299, 49154, 8010, 8016, 900401, 900401A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Express Pasajeros | V | 5967 | FLEX | 8 Cyl 6.0L | 364 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Exact
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 70
- Width 1 (mm): 26
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): 1.02
- Material: Steel
- Outside Diameter 1 (in): 2.76
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
25195388, 305637, 305699, 38344, 49804, 55565236, 89637, 89699, 950260, 950260A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Trax | L | 1364 | GAS | 4 Cyl 1.4L | 83 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Improved
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 75
- Width 1 (mm): 40
- Bearing Bore Inside Diameter:
- 1.18
- 30
- Width 1 (in): 1.57
- Material: Steel
- Outside Diameter 1 (in): 2.95
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
231094, 305362, 38285, 3947574, 419-039, 49544, 5086958AA, 89094, 89362, 910032, 910032A, SMAMP40362
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Ram 3500 | L | - | DIESEL | 6 Cyl 6.7L | 408 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Exact
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 70
- Width 1 (mm): 26
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): 1.02
- Material: Steel
- Outside Diameter 1 (in): 2.76
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
12627119, 305703, 39350, 49851, 89703, 999847, 999847A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Malibu | L | 1998 | GAS | 4 Cyl 2.0L | 122 |
- Interference engine application
- PowerGrip Premium OE Timing Belt Component Kit W/Water Pump
- Product Attributes:
- Springs Included: No
- Bolt Quantity: 0
- Belt Quantity: 1
- Grade Type: Oe Performance
- Spring Quantity: 0
- Timing Belt Width 1 (mm): 20
- Belt Top Color: Black
- Bolt Included: No
- Installation Instructions Included: Yes
- Installation Tool Included: No
- Instruction Sheet Number: 981647
- Tensioner Included: Yes
- Timing Belt 1 Teeth Quantity: 197
- Timing Belt Included: Yes
- Timing Marks: No
- Seal Quantity: 0
- Number of Components: 5
- Gasket Quantity: 0
- Gasket Or Seals Included: Yes
- Idler Pulley Included: Yes
- Idler Quantity: 3
- Engine Water Pump Quantity: 1
- Timing Belt Width 1 (in): .787
- Belt Material: Hsn, Fiberglass Cord
- Tensioner Type: Hydraulic
- Tooth Type: Modified Curvilinear (iii)
- Tensioner Quantity: 2
-
Features:
- Total solution for any application: Includes belts, idler(s), tensioners, tensioner springs, water pump, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications
- Water pumps are designed and built for long lasting, efficient cooling
- Hydraulic tensioners included, where needed
- Everything you need to do the job right, all in one box
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Gates Timing Belt Component Kits with Water Pump offer customers the best and most complete repair solution by including the same premium components as our TCK’s - timing belts, pulleys and tensioners - as well as a water pump. Timing belt driven water pumps should always be replaced at the same time as the timing belt. Don't take chances. With Gates TCKWP’s, you can avoid returns by replacing all critical system components at the same time.
This Part Fits the Following OEM/Substitute Numbers:
24548K, 3435-0329, BWPK41184A, TCKWP329A, WPK41184A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Acura RLX | V | 3471 | GAS | 6 Cyl 3.5L | - |
Showing 1 - 10 of 427 products
Loading...